C5103-A Smart LED String Lights

Introduction

Thank you for choosing the C5103-A. To optimize your user experience, please read this manual carefully before operation and keep it for future use.

Download Free APP:

Available on the App Store and Google Play. Search for "Smart Life".

Warning

1. This product is not a toy. Keep out of reach of children to avoid fire, burns, personal injury, or electric shock.
2. Use the voltage indicated on the package for normal operation.
3. Do not modify the lamps during the warranty period.
4. Do not install near gas or electric heaters, fires, candles, or any dangerous objects.
5. Before installation, check that the lamps and all parts are in good condition.
6. Ensure the power is turned off before installation.
7. Do not expose the lamp to corrosive conditions.
8. If the power cord is damaged, immediately cut off the power and stop using it.

Technical Specification

• Connection method: 2.4G Wifi & Bluetooth
• Control method: APP/Voice/Button
• Adapter input voltage: 100-240VAC
• Adapter output voltage: 24VDC/3A
• Rated working voltage: DC24V
• Rated power: 72W
• Lamp color: RGB
• Memory function: Yes
• Working temperature: -20℃ ~ +40℃
• Compatibility: Works with Amazon Alexa and Google Assistant.

Packing list

1. Permanent outdoor lights * 1
2. Infrared remote controller * 1
3. Class 2 power supply * 1
4. Mounting clips * 72
5. Mounting screws * 72
6. C015 controller * 1
7. Copy of the manual * 1

Product size information

Light strip segments:

• 1000mm (3.28ft)
• 1000mm (3.28ft)
• 1000mm (3.28ft)
• 1500mm (4.92ft)
• 300mm (0.98ft)
• 400mm (1.31ft)
• 300mm (0.98ft)

Total lights: 12pcs * 6

Controller dimensions:

• Diameter: 36.2mm (0.11ft)
• Height: 10mm (0.03ft)

Manual of Controller

Button Instruction:

Switch ?: Short press to turn on/off. Long press for 5 seconds to reset to pairing mode. The light will blink in red.

Installation Method

Installation method 1:

1. Peel off the adhesive paper.
2. Attach to a fixed surface.
3. Connect the light segments to the controller and fixed surface.

APP Intelligent Operation Introduction

Color Control:

• Add color with one click.
• Add color individually.
• Erase Color.
• Add points.
• Color light adjustment.
• Swipe the brightness bar to adjust light brightness in the current static mode.
• Move the color dial clockwise or counterclockwise to adjust your preferred color to the white circle. Adjust left or right to change color fullness.

Scene Modes:

• Recommended scenarios: Select from pre-set dynamic scenes.
• Collection mode: Long press an icon to collect favorite dynamic scenes or delete them.
• Custom mode: DIY your favorite color scenes.
• Scene list: Select different scene types.

Music Mode:

• Lights synchronize with music rhythm detected by the device microphone (Local mode) or mobile music (App mode).
• Adjust sensitivity and select different music scenes.

DIY Mode:

• Supports gradient, jump, breathing, flashing, flowing water, rainbow, and other DIY modes.
• Slide the slider to adjust brightness.
• Click "+" to add favorite colors.
• Set the lamp to one color.
• Divide the light into multiple segments and set different colors for each segment.
• Save custom scenes with a name.

Pairing Instruction

APP Download: Search for "Smart Life" on Google Play or the App Store. You can also scan the QR code provided.

1. Download the APP and Log In with an existing account or Sign Up for a new account.
2. Turn on the device, then turn on Bluetooth and Wi-Fi on your mobile phone. Ensure your phone is connected to a 2.4G network. Press and hold the button on the device for 3-5 seconds until the light bar flashes red (pairing mode).
3. Tap "Add Device" or the plus icon (+) on the Home page to go to the device adding page.
4. Enter your Wi-Fi password and click Next. Ensure you are using a 2.4GHz Wi-Fi network, as the device does not support 5GHz. Wait approximately 20 seconds for the device to be added.
5. The device will appear on the home page. You can now control it.

Edit Options: Click the edit icon to access more features:

• Modify device name.
• Linkage with other equipment.
• Share control with family.
• Linkage with other devices for one-click execution and automation.

Notice

• Please ensure network pairing is performed in 2.4G Wi-Fi or hotspot mode.
• If the connection times out or the network connection is unstable, try reconnecting from a location with a stronger signal.

Bluetooth Control Steps

Note: Bluetooth control is useful for devices with poor Wi-Fi signals or disconnected networks after the initial 2.4GHz Wi-Fi + Bluetooth connection.

1. Turn off your phone's Wi-Fi.
2. Turn on Bluetooth and open the device in the APP. The device can then be controlled via Bluetooth.

Common Problems and Solutions

1. Unable to connect to Wi-Fi:
   • Ensure the correct Wi-Fi password is entered.
   • Verify the connection is 2.4G Wi-Fi; the device does not support 5G Wi-Fi.
   • Check your internet connection. If the Wi-Fi signal is weak, move closer to the router or reset it.
2. Installer not working properly:
   • Close all background applications and reopen the Smart Life APP.
   • Uninstall and reinstall the Smart Life app.
3. Smart string light not responding:
   • Check if the light is turned off. If so, turn it on and wait for reconnection.
   • Check your internet connection. If necessary, reset the wireless router.

Guarantee

1. During the warranty period, Shenzhen Jindian Zhiguang Lighting Co., Ltd provides refunds or free replacements for devices used as intended.
2. This warranty does not cover:
   • Malfunction or damage from improper use, repair, or modification.
   • Failure or damage due to dropping.
   • Failure or damage caused by fire, earthquake, flood, lightning, or other natural disasters.
   • Malfunction or damage when used for purposes other than intended.
   • Failure or damage caused by third-party products.
   • Failure or damage caused by human factors.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance, as such modifications could void the user's authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirements. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).