Behringer EUROLIVE Series Quick Start Guide
This guide provides essential information for setting up and operating your Behringer EUROLIVE PA speaker system.
Important Safety Instructions
Please read and follow all safety instructions carefully. Terminals marked with a symbol carry electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables. Do not remove covers or attempt user servicing; refer all servicing to qualified personnel. Avoid exposure to rain and moisture, and do not place liquid-filled objects on the apparatus. Ensure proper ventilation and avoid heat sources. Always connect to a properly grounded mains socket. Unplug during lightning storms or long periods of non-use. Dispose of this product responsibly according to WEEE directives.
Hook-Up
Connecting a Microphone: Connect your microphone to the XLR INPUT using a balanced cable.
Connecting a Stereo Signal Source: Connect a stereo source (e.g., CD player, mixer output) to the 1/4" TRS INPUT using appropriate cables. For stereo, use both the left and right inputs if available, or a stereo-to-mono adapter.
Linking Several Speakers: Use an XLR cable to connect the LINK OUTPUT of one speaker to the INPUT of another speaker for daisy-chaining.
Controls
- POWER SWITCH: Turns the speaker on and off.
- FUSE: Replace blown fuses with the same type and rating.
- POWER SOURCE: Connect the included IEC power cable here.
- 1/4" TRS Input: Connect line-level signals from mixers or other sources.
- CLIP LED: Lights up when the input signal is overloading. Reduce input level if this occurs.
- LEVEL KNOB: Adjusts input sensitivity (gain) for 1/4" and XLR inputs.
- XLR INPUT: Connect microphones or balanced line-level signals.
- HIGH EQUALIZER: Adjusts treble frequencies (±15 dB).
- LOW EQUALIZER: Adjusts bass frequencies (±15 dB).
- LINK OUTPUT: Sends a copy of the source signal to another speaker via XLR.
- POWER LED: Indicates when the speaker is powered on.
Note: Never use the 1/4" and XLR inputs simultaneously.
Getting Started
- Placement: Position the speaker(s) on stands or as wedge monitors on the floor.
- Connections: Make all necessary audio and power connections. Do NOT turn on the power yet.
- Power On Source: Turn on your audio source (mixer, microphone, etc.).
- Power On Speaker: Press the POWER SWITCH. The POWER LED will illuminate.
- Playback: Play your audio source or speak into the microphone at a normal to loud level.
- Adjust Level: Adjust the LEVEL knob for the desired volume. If the CLIP LED flashes, reduce the input level. Adjust the LEVEL knob on each speaker if using multiple units.
- Equalization: If necessary, adjust the HIGH and LOW EQUALIZER knobs on each speaker to fine-tune the sound to your preference.
Specifications
The EUROLIVE series includes models with 15", 12", 10", and 8" woofers, offering various power output levels (RMS and Peak) for low and high frequencies. Key specifications include frequency response, crossover frequency, sound pressure level (SPL), and limiter/equalizer functions. Power supply options vary by region (120V, 230V, 240V, 100V) with corresponding fuse ratings. Dimensions and weight vary by model.
Other Important Information
Register your product online at musictribe.com for efficient service and warranty claims. In case of malfunction, contact your local Music Tribe Authorized Reseller or use the Online Support resources. Ensure correct mains voltage and fuse type for your unit. For FCC compliance information and details on the CE declaration, please refer to the full documentation available online.
Music Tribe
Music Tribe
