My Babiie i-Size Car Seat MBCS75

Welcome to the familie

Your trust in our product means the world to us, and we're thrilled to be a part of your parenting journey. Our team has worked tirelessly to ensure that this product provides comfort, safety, and style for you and your little one. We're confident it will exceed your expectations. Should you have any questions or require assistance in the future, please don't hesitate to reach out. Thank you for choosing My Babiie; we wish you and your family countless wonderful journeys ahead.

Get to know your Car Seat

Scan the QR code below on your camera app to be linked off to our page to get all the information you need for using your car seat.

Warranty

We provide a 1 year warranty against manufacturing or material defects. The warranty period is effective from the day of purchase and applicable to the UK and Ireland.

The Warranty does not cover:

• Natural signs of wear and damage resulting from excessive stress.
• Damage resulting from inappropriate or improper use.
• Visit our website mybabiie.com/guarantee to see full Terms & Conditions.

What is covered by the Warranty?

Fabric: All of our fabrics meet very high requirements with regards to colour fastness when exposed to UV radiation. Nevertheless, all fabrics fade when exposed to prolonged UV radiation. This is not a material defect, but rather a normal sign of wear which is not covered by the Warranty.

Buckles: Buckle malfunction is often due to accumulations of dirt and dust which may stop it from working properly. If this happens, please firstly check if you can clean by yourself without damaging the installation. Please contact your retailer directly in the event of a warranty claim. We will give you the advice and support you need. When processing claims, product-specific depreciation rates will be applied. Please refer to our General Terms and Conditions which are available from your retailer. To read more about your guarantee, please visit mybabiie.com/guarantee.

Our guarantee is provided by My Babiie Retail Ltd, Registered address: Suite 188, Stockiie Business Centre, Unit A, St. James Business Park, Henwood Ind. Estate, Henwood, Ashford TN24 8DH

Your statutory rights are not affected by the guarantee.

Registering your Warranty

To register your warranty please visit www.mybabiie.com/warranties

Registering for your product warranty is important because it provides proof of purchase and allows you to claim repairs or replacements if your product develops a fault. It will also help us contact you in the event of a product issue that you may need to be made aware of.

Problems or Questions

If you have any questions about your product then please drop us an email at info@mybabiie.com and we will get back to to you as soon as possible. Alternatively, you can chat to us on our Live Support Chat on our website mybabiie.com or contact us via our social media channels.

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

i-Size ECRS Notice

This is an i-Size Enhanced Child Restraint System. It is approved according to UN Regulation No. 129, for use in i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle users' manual.

If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.

"i-Size booster seat" notice

This is a i-Size booster seat Enhanced Child Restraint System. It is approved according to UN Regulation No. 129, for use primarily in "i-Size seating positions" as indicated by vehicle manufacturers in the vehicle user's manual.

If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.

IMPORTANT

DO NOT use before the child's age exceeds 15 months. (Refer to instructions)

IMPORTANT

• This product can be forward-facing used by 5-point safety system for children with a height of 76-105cm (Weight: 9-18kg), using ISOFIX+Top tether to fix the child restraint system.
• This product can also be forward-facing used for children with a height of 100-150cm (Weight: 15-36kg), using adult three-point belt to fix the child restraint system, or using ISOFIX and adult three-point belt together to fix the child restraint system.
• Do not use any load bearing contact points other than those described in the instructions and marked in the child restraint when in 100-150cm.
• In order to keep for future reference, the instruction manual should be stored in the back bag of the headrest cloth cover.
• Do not use this child seat at home. It has not been designed for home use and should only be used in your car.
• For the reason of safety, the child seat must be fixed inside the vehicle using ISOFIX anchorages even if you do not put your child inside the child seat.
• The rigid items and plastic parts of a child seat shall be so located and installed that they are not liable, during everyday use of the vehicle to become trapped by a moveable seat or in a door of the vehicle.
• Any straps holding the restraint to the vehicle should be tight.
• Any straps restraining the child should be adjusted to the child's body.
• Straps should not be twisted.
• Ensure that any lap strap is worn low down, so that the pelvis is firmly engaged, shall be stressed.
• The device should be replaced when it has been subject to violent stresses in an accident.
• It's dangerous to make any alterations or additions to the device without the approval of the Type Approval Authority, also dangerous not to follow closely the installation instructions provided by the manufacturer.
• When the chair is not provided with a textile cover, the chair should be kept away from sunlight, otherwise it may be too hot for the child's skin.
• Don't leave your child in the device unattended.
• Any luggage or other object liable to cause injuries in the event of a collision shall be properly secured.
• The ECRS shall not be used without the cover.
• The seat cover should not be replaced with any other than the one recommended by the manufacturer, because the cover constitutes an integral part of the restraint performance.
• The instructions shall be retained on the device for its life period or in the vehicle handbook in the case of built-in restraints.
• The user shall also be referred to the vehicle manufacturer's handbook.
• Never use a second-hand product, as you can never be certain what was happened to it.
• Do not allow food or drink in or near the car seat as debris and dirt ingress can affect the critical safety performance of the harness system.

Know your car seat

1 Headrest

2 Shoulder strap

3 Shoulder pads

4 Buckle

5 Crotch pad

6 Adjuster button

7 Harness adjuster strap

8 Headrest pull strap

9 ISOFIX attachment

10 ISOFIX release button

11 Top tether release button

12 Top tether hook

Usage

1 Install positions of the child seat in vehicle

Diagram: Shows a car seat being installed with a diagonal belt and lap belt. One diagram shows proper installation with a green checkmark, and another shows improper installation with a red X. Another diagram shows a car's seat with question marks and checkmarks indicating correct and incorrect placement of the seat.

Text: Only suitable if the approved vehicles are fitted with 3 point safety-belt, approved to UN/ECE Regulation No.16 or other equivalent standards.

Note: Not to use rearward-facing in seating positions where an active frontal airbag is installed.

Note: Only use on this seat if a lap and diagonal seat belt is fitted.

2 Adjust the headrest

As shown in the picture, you can adjust the headrest up and down by pulling on the headrest pull strap 3, and adjust the headrest to a position suitable for the child's head.

Diagram: Shows two car seats with arrows indicating the adjustment of the headrest up and down.

3 Checking the shoulder strap height

Always check that the shoulder straps are at the correct height for your child. The child's shoulder straps should always be threaded through the slots in the cover and seat shell that are closest to the top of your child's shoulders.

Diagram: Shows three children with shoulder straps that are too low, too high, and slightly higher, with corresponding text labels.

4 Usage of buckle

• Get the left and the right pieces of the buckle together.
• Insert both buckle pieces into the slot of the buckle. When you hear a "click," it indicates that the buckle is securely fastened. Pull on the buckle pieces to confirm that it is locked properly.

Diagram: Shows a child being buckled into the car seat. It also shows how to release the safety belts by pressing a red button.

5 Adjust the length of the harness

Loosen the shoulder strap: The shoulder strap can be slackened by pressing the adjuster (under the seat cover 6) on the front of the seat. Press down the adjuster as you grip the two shoulder straps with your another hand. Pull the harness towards you to loosen the shoulder strap.

Tighten the shoulder strap: Pull the shoulder strap upward to remove the slack from the lap sections of the harness then pull the front stretch belt until the harness adjuster strap 7 is fully tightened.

The harness should be adjusted as tightly as possible without causing discomfort to your child. A loose harness can be dangerous. Check the harness adjuster and tighten each time when the child is placed in the seat.

Diagram: Shows a child being fitted into the car seat, with close-ups of the harness adjustment.

6 Adjust the ISOFIX attachments

The ISOFIX attachments can be adjusted to multiple positions to accommodate different ISOFIX low anchorages extending from the car seat.

Press down the release button 10 to extend the ISOFIX attachments on both sides to their longest position. Snap the ISOFIX into the ISOFIX anchor points, ensuring you hear a "click" and the ISOFIX latching indicator turns GREEN.

Diagram: Shows the ISOFIX attachment being extended and connected to the car's ISOFIX anchor points, with indicators for correct and incorrect connection.

7 Adjust top tether

Diagram: Three steps showing how to undo the Velcro, press the adjuster button, and hook the top tether to the anchorage point.

Text: Firstly, undo the storage Velcro. Secondly, press and hold the button of the top tether adjuster (see 2) and release the top tether to the appropriate length (see 3). Thirdly, hook the top tether to the designated top tether anchorage as recommended in the vehicle user manual. Finally, tighten the top tether until the adjustment indicator turns green.

8 How to remove harness for use with children of height 100-150cm

Open the cloth cover on the back of the car seat and unhook the straps from the hooks A.

Unfasten the buckle C and shoulder sleeves B on both sides, and store the buckle in the seat groove D, and then pull out the seat belt and pull out the buckle insert. Pull out the strap with shoulder sleeves from the top and store it properly. Finally, adjust the fabric cover back properly before using the seat.

Diagram: Shows the process of unhooking straps, unfastening the buckle, and storing parts.

9 Installation & removal of seat backrest & base

Installation: Place the base and backrest horizontally (Figure 1), move the circled area above the two grooves on the backrest (Figure 2), and then pull up and rotate 90° to fix the backrest into the grooves (Figure 3).

Disassemble: Push the backrest backward until you hear a "click," indicating that it has been disassembled.

Diagram: Three figures illustrating the installation of the backrest and base, and two figures showing the disassembly process.

Installation

Installed forward-facing (Height: 76-105cm)

Usage: ISOFIX+Top tether

Step 1: Push the ISOFIX connectors 9 on both sides of the base into the ISOFIX anchor points until they securely click into place. When properly attached, the ISOFIX release button 10 will turn green, indicating a secure connection.

Step 2: Pull out the top tether strap to a suitable length, and then fix the top tether hook 12 to the top tether anchorage of the vehicle seat.

Step 3: Put the child in the safety seat, and lock the buckle 4, tighten the front tether 7.

Diagram: Shows the steps for installing the car seat using ISOFIX and top tether, including close-ups of the ISOFIX connection and the child being secured.

Installed forward-facing (Height: 100-150cm)

Usage: ISOFIX + 3 point belt

Step 1: Push the ISOFIX connectors 9 on both sides of the base into the ISOFIX anchor points until they securely click into place. When properly attached, the ISOFIX release button 10 will turn green, indicating a secure connection.

Step 2: Put the child into the safety seat, adjust the headrest up and down according to the height of the child.

Step 3: Pull out the adult 3-point belt, clip the vehicle shoulder belt into the belt guide hook of the headrest, and then clip vehicle shoulder and lap belt together into the belt guide slot on the side of the seat, finally lock the buckle. The lap belt on the other side should also pass under the armrest.

Diagram: Shows the steps for installing the car seat using ISOFIX and a 3-point belt, with a visual guide for shoulder belt and lap belt placement.

Installed forward-facing (Height: 100-150cm)

Usage: ② only 3 point belt

Step 1: Put the child into the safety seat, adjust the headrest up and down according to the height of the child.

Step 2: Pull out the adult 3-point belt, clip the vehicle shoulder belt into the belt guide hook of the headrest, and then clip vehicle shoulder and lap belt together into the belt guide slot on the side of the seat, finally lock the buckle.

Diagram: Shows correct and incorrect usage of the 3-point belt, with a green checkmark for correct and a red X for incorrect. Text advises to ensure the buckle does not interfere with the primary load-bearing contact point.

Cleaning

Please be sure to use only original My Babiie replacement seat covers, as the seat cover is important to the proper functioning of the system. Replacement seat covers are available from My Babiie.

Warning: The child seat must not be used without the seat cover.

• The cover can be removed and hand washed at 30°C with a mild detergent. Follow the instructions on the washing label of the cover. The colours of the cover may fade if washed at more than 30°C. Never tumble dry in an electric clothes dryer (the fabric may separate from the padding).
• The plastic parts can be cleaned using soapy water. Do not use harsh cleaning agents (such as solvents).
• The harness can be removed and washed in lukewarm soapy water.

Caution! Never remove the buckle from the straps.

Register your product

Website: www.mybabiie.com/warranties

Website (Spanish): www.mybabiie.com/registro

In the first instance of needing assistance please contact your original place of purchase.

This product qualifies for 12 month warranty when registered through our website mybabiie.com

Social Media:

• Facebook: My Babiie
• Instagram: @MyBabiieOfficial
• YouTube: My Babiie
• TikTok: @mybabiie_official

Company Information: My Babiie Retail Limited, Suite 188, Stockiie Business Centre, Unit A, St. James Business Park, Ashford TN24 8DH. My Babiie SL, Calle Delta del Danubio, Nave 14, Los Belones, Murcia 30385.