My Babiie i-Size Spin Car Seat MBCS300

Welcome to the familiie

Your trust in our product means the world to us, and we're thrilled to be a part of your parenting journey. Our team has worked tirelessly to ensure that this product provides comfort, safety, and style for you and your little one. We're confident it will exceed your expectations. Should you have any questions or require assistance in the future, please don't hesitate to reach out. Thank you for choosing My Babiie; we wish you and your family countless wonderful journeys ahead.

Get to know your Car Seat

Scan the QR code below on your camera app to be linked off to our page to get all the information you need for using your car seat.

[QR Code]

Warranty

We provide a 1 year warranty against manufacturing or material defects. The warranty period is effective from the day of purchase and applicable to the UK and Ireland.

The Warranty does not cover:

• Natural signs of wear and damage resulting from excessive stress.
• Damage resulting from inappropriate or improper use.
• Visit our website mybabiie.com/guarantee to see full Terms & Conditions.

What is covered by the Warranty?

Fabric: All of our fabrics meet very high requirements with regards to colour fastness when exposed to UV radiation. Nevertheless, all fabrics fade when exposed to prolonged UV radiation. This is not a material defect, but rather a normal sign of wear which is not covered by the Warranty.

Buckles: Buckle malfunction is often due to accumulations of dirt and dust which may stop it from working properly. If this happens, please firstly check if you can clean by yourself without damaging the installation. Please contact your retailer directly in the event of a warranty claim. We will give you the advice and support you need. When processing claims, product-specific depreciation rates will be applied. Please refer to our General Terms and Conditions which are available from your retailer. To read more about your guarantee, please visit mybabiie.com/guarantee.

Our guarantee is provided by My Babiie Retail Ltd, Registered address: Suite 188, Stockiie Business Centre, Unit A, St. James Business Park, Henwood Ind. Estate, Henwood, Ashford TN24 8DH

Your statutory rights are not affected by the guarantee.

Registering your Warranty

To register your warranty please visit www.mybabiie.com/warranties

Registering for your product warranty is important because it provides proof of purchase and allows you to claim repairs or replacements if your product develops a fault. It will also help us contact you in the event of a product issue that you may need to be made aware of.

Problems or Questions

If you have any questions about your product then please drop us an email at info@mybabiie.com and we will get back to you as soon as possible. Alternatively, you can chat to us on our Live Support Chat on our website mybabiie.com or contact us via our social media channels.

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

i-Size ECRS Notice

This is an i-Size Enhanced Child Restraint System. It is approved according to UN Regulation No.129, for use in, i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle users' manual. If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.

"i-Size booster seat" notice

This is a i-Size booster seat Enhanced Child Restraint System. It is approved according to UN Regulation No. 129, for use primarily in "i-Size seating positions" as indicated by vehicle manufacturers in the vehicle user's manual. If in doubt, consult either the Enhanced Child Restraint System manufacturer or the retailer.

IMPORTANT

DO NOT use forward facing before the child's age exceeds 15 months. ?

Do not to use the ECRS in seating positions where there is an active frontal airbag installed, death or serious injury may occur. ❌

0-15M (months)

WARNING

Never use the child seat without its fabric cover. The fabric cover should not be replaced with any other than the ones recommended by the manufacturer. The fabric cover will affect the integral performance of the baby/child restraint system.

Securing your baby using the baby insert

CAUTION

If your baby's height is less than 87cm, please install the inner cushion on the baby child seat. Please remove the inner cushion from the child seat before use if your child's height is between 87cm and 150cm. ?

[Image of inner cushion]

Safety warning

In order to ensure the safety of your child, please read the relevant instructions carefully to avoid dangerous situations!

Understand the product

This is a height of 40-150cm product, suitable for children from 0-36KG.

DO NOT use forward facing before the child's age exceeds 15 months. ?

IMPORTANT

• This product can be rearward-facing used for children with a height of 40-87cm (Weight: 0-13kg), using ISOFIX +Top tether to fix the child restraint system.
• This product can also be forward-facing used by 5-point safety system for children with a height of 76-105cm (Weight: 9-18kg), using ISOFIX+Top tether to fix the child restraint system.
• This product can also be forward-facing used for children with a height of 100-150cm (Weight: 15-36kg), using adult three-point belt to fix the child restraint system, or using ISOFIX and adult three-point belt together to fix the child restraint system.
• Do not use any load bearing contact points other than those described in the instructions and marked in the child restraint when in 100-150cm;
• Please keep for future reference, a storage compartment for the instructions is located on the back of the child seat.
• Do not use this child seat at home. It has not been designed for home use and should only be used in your car.
• Do not use rearward facing child seat in seating positions where there is an active frontal airbag installed, death or serious injury can occur. ❌
• For the reason of safety, the child seat must be fixed inside the vehicle using ISOFIX anchorages even if you do not put your child inside the child seat.
• The rigid items and plastic parts of a child seat shall be so located and installed that they are not liable, during everyday use of the vehicle to become trapped by a moveable seat or in a door of the vehicle.

• Any straps holding the restraint to the vehicle should be tight.
• Any straps restraining the child should be adjusted to the child's body.
• Straps should not be twisted.
• Ensure that any lap strap is worn low down, so that the pelvis is firmly engaged, shall be stressed.
• The device should be replaced when it has been subject to violent stresses in an accident.
• It's dangerous to make any alterations or additions to the device without the approval of the Type Approval Authority, also dangerous not to follow closely the installation instructions provided by the manufacturer.
• When the chair is not provided with a textile cover, the chair should be kept away from sunlight, otherwise it may be too hot for the child's skin.
• Don't leave your child in the device unattended.
• Any luggage or other object liable to cause injuries in the event of a collision shall be properly secured.
• The ECRS shall not be used without the cover.
• The seat cover should not be replaced with any other than the one recommended by the manufacturer, because the cover constitutes an integral part of the restraint performance.
• The instructions shall be retained on the device for its life period or in the vehicle handbook in the case of built-in restraints.
• The user shall also be referred to the vehicle manufacturer's handbook.
• Never use a second-hand product, as you can never be certain what was happened to it.
• Do not allow food or drink in or near the car seat as debris and dirt ingress can affect the critical safety performance of the harness system.

Know your car seat

[Diagram of car seat with numbered parts]

1. Handle of headrest
2. Headrest
3. The guide groove of the headrest
4. Shoulder sleeves
5. Shoulder strap
6. Comfortable cushion
7. Buckle
8. Crotch pad
9. Adjuster button
10. Harness adjuster strap
11. Angle adjuster & Rotation adjuster
12. ISOFIX attachment
13. ISOFIX release button
14. Top tether release button
15. Top tether

Usage

1 Install positions of the child seat in vehicle

Proper installation ☑ Improper installation ❌

Only suitable if the approved vehicles are fitted with 3 point safety-belt, approved to UN/ECE Regulation No.16 or other equivalent standards.

→ ISOFIX Anchor points for car seats

[Diagram showing seat belt and ISOFIX anchor points with correct/incorrect indicators]

?1 Do not use in seating positions where an active frontal airbag is installed. ❌

?2 Only use on this seat if ISOFIX anchorages are fitted. ✅

[Diagram of car seat base with ISOFIX anchorages and indicators]

2 Adjust the headrest

As shown in the picture, you can adjust the headrest up and down by pulling on the headrest adjustment tab 1, and adjust the headrest to a position suitable for the child's head. [Image of headrest adjustment]

3 Checking the shoulder strap height

Always check that the shoulder straps are at the correct height for your child. The child's shoulder straps should always be threaded through the slots in the cover and seat shell that are closest to the top of your child's shoulders.

[Images showing shoulder straps too low, too high, and correctly positioned]

• too low ❌
• too high ❌
• slightly higher ✅

4 Usage of buckle

• Get the left and the right pieces of the buckle together.
• Insert both buckle pieces into the slot of the buckle. When you hear a "click," it indicates that the buckle is securely fastened. Pull on the buckle pieces to confirm that it is locked properly. [Image of buckle being fastened]

To release the safety belts, press the red button, and the buckle pieces will pop up. [Image of buckle release]

5 Adjust the length of the harness

[Diagram showing harness adjustment]

Loosen the harness

The harness can be slackened by pressing the adjuster (under the seat cover) on the front of the seat. Press down the adjuster as you grip the two harnesses with your other hand. Pull the harness towards you to loosen the harness.

Tighten the harness

Pull the harness upward to remove the slack from the lap sections of the harness then pull the front stretch belt until the harness is fully tightened.

The harness should be adjusted as tightly as possible without causing discomfort to your child. A loose harness can be dangerous. Check the harness adjuster and tighten each time when the child is placed in the seat.

6 Adjust the ISOFIX attachments

The ISOFIX attachments can be adjusted to fit various positions, accommodating the different placements of ISOFIX low anchorages in your car. Press the release button 13 to extend the ISOFIX attachments on both sides to their longest position. Snap the ISOFIX attachments into the ISOFIX anchor points. Ensure you hear a "click" and confirm that the ISOFIX latch indicator shows GREEN. [Image of ISOFIX attachment and indicator]

To release the ISOFIX attachments after installation is complete, press the red release button on the ISOFIX connector in the indicated direction. This will release the ISOFIX connector. [Image of ISOFIX release]

After installing the ISOFIX connectors, push the child restraint forward until it fits securely against the car seat. The ISOFIX base is now properly installed. ✅

7 One click adjustment method: rotation & recline

Pull back and forth to adjust the child seat to recline position F1/F2/F3. [Diagrams of recline positions F1, F2, F3]

Rotate the child seat left or right to adjust it to the desired position: forward-facing (suitable for a height of 76-105 cm) or rearward-facing (suitable for a height of 40-87 cm). In the rearward-facing position, the seat can also be adjusted to recline settings R1, R2, or R3. [Diagrams of recline positions R1, R2, R3]

8 Adjusting the top tether

1. Firstly, open the Velcro strap fastener. [Image of Velcro fastener]

2. Next, press and hold the button on the top tether adjuster (see Figure 2) and extend the top tether to the appropriate length (see Figure 3). [Images of top tether adjustment]

3. Then, attach the top tether connector to the top tether anchorage as recommended in the vehicle user manual. Finally, tighten the top tether until the adjustment indicator turns green. [Image of top tether attachment]

Installation

Notice before Installation

[Table showing compatibility of headrest, shoulder pads, crotch pad, and buckle for different height ranges]

• 40-87CM (Rearward facing use)
• 76-105CM
• 100-150CM

Triangle sponge: > 60cm needs to be removed. [Image of triangle sponge]

Installed rearward-facing

1 Usage: ISOFIX+Top tether Height: 40-87cm

DO NOT use forward facing before the child's age exceeds 15 months. ?

[Diagram of rearward-facing installation]

Step 1

Push the ISOFIX connectors 13 on both sides of the base and attach them to the ISOFIX anchor points. Once you hear a "click," the ISOFIX release button will turn green ✅, indicating a secure connection.

Step 2

Put the child in the safety seat, and lock the buckle 7, tighten the front tether 10. Adjust the shoulder belt to be as snug as possible without causing discomfort to the child. Position the crotch strap as low as possible, ensuring it sits close to the crotch rather than the abdomen. For your child's comfort and safety, ensure the safety belt is not twisted. [Diagram of child secured in seat]

Step 3

Turn the rotation adjuster 11 to the rearward-facing position. The vehicle should only be driven after you hear the "click" sound, confirming it is securely locked in place. ✅

Step 4

Pull out the top tether strap to a suitable length, and then fix the top tether hook to the top tether anchorage of the car seat. [Image of top tether attachment]

Installed forward-facing

1 Usage: ISOFIX+Top tether Height: 76-105cm

[Diagram of forward-facing installation with ISOFIX + Top tether]

Step 1

Push the ISOFIX connectors 13 on both sides of the base and attach them to the ISOFIX anchor points. Once you hear a "click," the ISOFIX release button will turn green ✅, indicating a secure connection.

Step 2

Put the child in the safety seat, and lock the buckle 7, tighten the front tether 10. Adjust the shoulder belt to be as snug as possible without causing discomfort to the child. Position the crotch strap as low as possible, ensuring it sits close to the crotch rather than the abdomen. For your child's comfort and safety, ensure the safety belt is not twisted.

Step 3

Pull out the top tether strap to a suitable length, and then fix the top tether hook to the top tether anchorage of the car seat. [Image of top tether attachment]

1 Usage: ISOFIX + 3 point belt Height: 100-150cm

[Diagrams illustrating steps for installing with ISOFIX + 3 point belt]

Please pay attention before installing child 100-150cm:

1. Release the buckle 7 first.
2. Remove the cushion 6 and store it properly.
3. Lift up the seat cover and place the buckle 7 into the seat groove for storage.
4. Unfasten the shoulder sleeves 4 on both sides.
5. Open the seat cover and detach the shoulder sleeves 4 along with the straps from the seat. Store them properly.
6. Insert both shoulder straps, which are connected to the buckle inserts, inside the seat cover. Then reassemble the seat cover completely before use.

2

Push the ISOFIX connectors 13 on both sides of the base and attach them to the ISOFIX anchor points. When you hear a "click", the ISOFIX release button will turn green ✅, indicating a secure connection.

Coloque al niño en el asiento de seguridad, y ajuste el reposacabezas hacia arriba o hacia abajo según la altura del niño.

Saque el cinturón de seguridad de 3 puntos para adultos y asegure el cinturón de hombro del vehículo en el gancho guía del reposacabezas. Luego, inserte tanto el cinturón de hombro como el cinturón de cadera en la ranura de guía del cinturón en el lateral del asiento. Finalmente, cierre la hebilla de forma segura. ✅

3 Usage: 2 only 3 point belt Height: 100-150cm

Coloque al niño en el asiento de seguridad, y ajuste el reposacabezas hacia arriba o hacia abajo según la altura del niño.

Saque el cinturón de seguridad de 3 puntos para adultos y sujete el cinturón de hombro del vehículo en el gancho guía del reposacabezas. Luego, asegure tanto el cinturón de hombro como el cinturón de cadera en la ranura de guía del cinturón en el lateral del asiento. Finalmente, cierre la hebilla de forma segura. ✅

Shoulder belt ? Lap belt ?

Before use, ensure that the buckle of the adult 3-point seat belt does not interfere with the main load-bearing contact point of the child restraint system. If you are unsure, please contact the manufacturer of the child restraint system for guidance.

Remove and assemble the fabric cover

Disassembly steps

1. Primero: Desbloquee la hebilla. 7

2. Segundo: Retire la almohadilla. 6

3. Tercero: Retire la esponja triangular. [Image of triangle sponge removal]

4. Cuarto: Abra ambas fundas de los hombros. 5

5. Quinto: Retire la funda del reposacabezas. 2

Finalmente, retire la funda de tela a lo largo del borde del asiento.

Si desea volver a instalar la funda de tela, siga los pasos inversos para la instalación.

PRECAUCIÓN

Asegúrese de que el cinturón de seguridad esté colocado en la parte baja, de modo que la pelvis quede firmemente enganchada. Tire del cinturón hasta que quede plano y cerca del cuerpo de su hijo.

El cinturón debe estar correctamente ajustado y asegurarse de que no esté torcido.

Este asiento para niños debe usarse únicamente en posición vertical hacia adelante.

Antes de cada viaje, asegúrese de que el asiento giratorio esté completamente encajado. ✅

No conduzca a menos que el asiento para niños esté en la posición orientada hacia adelante o hacia atrás.

El asiento puede girar 360° completos. ?

Limpieza

Asegúrese de utilizar únicamente fundas de asiento de repuesto originales de My Babiie, ya que la funda del asiento es importante para el correcto funcionamiento del sistema. My Babiie dispone de fundas de asiento de repuesto.

! El asiento para niños no debe utilizarse sin la funda del asiento.

• La funda se puede quitar y lavar a mano a 30°C con un detergente suave. Siga las instrucciones en la etiqueta de lavado de la funda. Los colores de la funda pueden desteñirse si se lava a más de 30°C.
• Nunca seque en secadora eléctrica (la tela podría separarse de la ropa).
• Las piezas de plástico se pueden limpiar con agua y jabón. No utilice limpieza dura agentes (como disolventes).
• El arnés se puede quitar y lavar con agua tibia y jabón.

¡Precaución! Nunca retire la hebilla de las correas.

Register your product

www.mybabiie.com/warranties

www.mybabiie.com/registro

In the first instance of needing assistance please contact your original place of purchase.

This product qualifies for 12 month warranty when registered through our website

mybabiie.com

[Social media icons: Facebook, Instagram, YouTube, TikTok]

My Babiie Retail Limited, Suite 188, Stockiie Business Centre, Unit A, St. James Business Park, Ashford TN24 8DH

My Babiie EU, Generaal Vetterstraat 76A, 1059 BW Amsterdam, The Netherlands