My Babiie MB200i Travel System - Instructions

Important Safety Information ⚠️

Read all instructions before use. Failure to follow these warnings and instructions could result in serious injury or death.

General Safety:

• Never leave your child unattended.
• Ensure all harnesses and restraints are properly fastened.
• Do not use on stairs or escalators.
• This product is intended for one child at a time.
• Check that all locking devices are engaged before use.

Weight and Load Limits:

• Maximum weight for the seat unit: 15 kg (33 lbs).
• Maximum weight for the storage basket: 2 kg (4.4 lbs).
• Always check the specific weight limits for any infant car seat used with this travel system.

Brake System:

• Always apply the brake when parking the stroller, even for a moment.
• Ensure the brake is fully engaged by pushing down firmly on the brake pedal.

Harness System:

• The 5-point harness must always be used and properly adjusted to fit your child snugly.
• Ensure the shoulder straps are at or above your child's shoulders.

Parts Identification ℹ️

Familiarize yourself with all components before assembly. The travel system includes:

• Frame: The main chassis of the stroller.
• Seat Unit: The main seating component for the child.
• Canopy: Provides shade and protection.
• Wheels: Front and rear wheels for mobility.
• Car Seat Adapters: For attaching compatible infant car seats.
• Raincover: Protects the child from rain.
• Bumper Bar: Safety bar in front of the child.
• Harness System: 5-point safety harness.

[Diagram Description: An illustration shows the travel system laid out with each part clearly labeled with numbers corresponding to the list above. The frame is shown folded and unfolded. The seat unit can be attached facing forward or backward. The canopy attaches to the seat unit. Wheels attach to the frame. Adapters click into place on the frame.]

Assembly and Setup ⚙️

Follow these steps carefully to assemble your travel system.

Unfolding the Frame:

1. Locate the folding latch on the side of the frame.
2. Lift the latch and simultaneously push down on the handlebar or frame base.
3. The frame will unfold. Ensure it locks securely into place.

[Diagram Description: Shows a hand operating a latch on the stroller frame while pushing down to unfold it. An arrow indicates the direction of unfolding. A click sound or visual indicator signifies it's locked.]

Attaching the Wheels:

1. Identify the front and rear wheels.
2. Align the wheel axle with the corresponding slot on the frame.
3. Push firmly until the wheel clicks into place.
4. Repeat for all wheels. Ensure they are securely attached.

[Diagram Description: Close-up view of a wheel being pushed onto the stroller frame. A diagram shows the wheel axle fitting into a socket. An indicator shows a secure connection.]

Attaching the Seat Unit:

1. Locate the attachment points on the frame.
2. Align the seat unit connectors with the frame's attachment points.
3. Push down until the seat unit clicks securely onto the frame.
4. Ensure the seat unit is stable and correctly oriented (forward or rear-facing).

[Diagram Description: Shows the seat unit being lowered onto the stroller frame. Arrows indicate alignment with mounting brackets. A click symbol indicates secure attachment.]

Attaching the Canopy:

1. Locate the canopy attachment points on the seat unit.
2. Slide the canopy connectors into the designated slots.
3. Ensure the canopy is fully extended and secured.

[Diagram Description: Shows the canopy being attached to the top of the seat unit. Tabs or clips are shown securing it.]

Using Car Seat Adapters:

1. Locate the adapter attachment points on the frame.
2. Insert the car seat adapters into the designated slots until they click.
3. Ensure adapters are securely locked before attaching the car seat.

[Diagram Description: Shows car seat adapters being inserted into the stroller frame. Arrows indicate the correct orientation and insertion path. A click symbol indicates secure attachment.]

Usage Instructions ?

Learn how to operate your travel system safely and efficiently.

Adjusting the 5-Point Harness:

1. Ensure the child is seated correctly.
2. Adjust the shoulder straps to be at or slightly above the child's shoulders.
3. Fasten the buckle by inserting the two clips into the central buckle until they click.
4. Tighten the harness using the adjustment strap until it is snug but comfortable.
5. Ensure the chest clip (if applicable) is positioned at armpit level.

[Diagram Description: Illustrates the 5-point harness, showing how to adjust shoulder straps, buckle the clips, and tighten the main strap. A diagram shows the correct snugness of the harness.]

Reclining the Seat:

1. Locate the recline lever(s) at the back of the seat unit.
2. Squeeze or lift the lever(s) while supporting the seat back.
3. Move the seat back to the desired recline position.
4. Release the lever(s) to lock the seat in place.

[Diagram Description: Shows the rear of the seat unit with a recline lever. An arrow indicates squeezing the lever and moving the seat back. Multiple positions are indicated.]

Folding and Unfolding:

To Fold:

1. Ensure the seat unit is in the upright position.
2. Locate the folding mechanism (usually a trigger or button on the handlebar or frame).
3. Activate the folding mechanism and guide the stroller downwards.
4. The stroller will fold. Ensure it locks automatically for storage.

To Unfold:

1. Release the frame lock (usually a lever or strap).
2. Lift the handlebar or frame base and allow the stroller to unfold.
3. Ensure the frame locks securely into the open position.

[Diagram Description: Two sequences of images. The first shows the stroller being folded step-by-step. The second shows it being unfolded. Arrows indicate movement and locking points.]

Locking/Unlocking Swivel Wheels:

The front wheels may have a swivel lock feature for different terrains.

1. Locate the small lever or switch on each front wheel assembly.
2. Slide the lever to the 'locked' position to prevent the wheel from swiveling.
3. Slide the lever to the 'unlocked' position to allow the wheel to swivel freely.

[Diagram Description: Close-up of a front wheel showing a small lever. One image shows the lever in the 'locked' position (straight), and another in the 'unlocked' position (angled).]

Applying the Brake:

1. Locate the brake pedal, typically on the rear axle.
2. Push the pedal down firmly with your foot to engage the brake.
3. Lift the pedal up to release the brake.

[Diagram Description: Shows a foot pressing down on a brake pedal located on the rear axle of the stroller. An indicator shows the brake is engaged.]

Attaching and Detaching the Infant Car Seat:

Ensure you are using a compatible infant car seat and the correct adapters.

To Attach:

1. Ensure the car seat adapters are securely attached to the frame.
2. Align the infant car seat with the adapters.
3. Push down firmly on both sides of the car seat until you hear or feel it click into place.
4. Gently tug on the car seat to ensure it is securely locked.

To Detach:

1. Locate the release buttons or levers on the car seat or adapters.
2. Press the release buttons/levers simultaneously.
3. Lift the car seat off the adapters.

[Diagram Description: Two sequences. First, shows an infant car seat being lowered onto the adapters on the stroller frame, with arrows indicating alignment and a click symbol. Second, shows hands pressing release buttons on the car seat/adapters to lift it off.]

Maintenance and Care ?

Keep your travel system clean and in good working order.

Cleaning:

• Frame: Wipe the frame with a damp cloth and mild soap. Dry thoroughly. Do not use abrasive cleaners.
• Fabric Parts: Spot clean fabric with mild soap and water. Allow to air dry completely. Do not machine wash or tumble dry unless specifically indicated by a care label (check product tags).
• Wheels: Clean wheels regularly to remove dirt and debris. A dry brush or damp cloth can be used.

Storage:

• Store the stroller in a dry place.
• If storing for an extended period, ensure it is clean and dry.
• Fold the stroller and secure it with the frame lock.

Troubleshooting ❓

If you encounter issues, consult the following:

Warranty Information ?️

Your My Babiie MB200i Travel System is covered by a manufacturer's warranty. Please refer to the separate warranty card or visit the My Babiie website for full terms and conditions, registration, and claims.

For product support, please visit: My Babiie Product Support