Bulldog Installation Manual

Introduction

Welcome to the installation guide for your new Bulldog device from Puckipuppy. This manual provides step-by-step instructions to ensure a smooth and correct setup.

Safety Precautions

• Always read the entire manual before beginning installation.
• Ensure the installation area is clear of obstructions.
• Use appropriate tools for installation. ?
• Keep small parts away from children. ?
• If unsure, consult a professional installer.

Package Contents

Before you begin, verify that all parts are present:

Installation Steps

1. Choose Location: Select a suitable mounting location for the Bulldog device. Ensure it is within reach of power or network connections if applicable.
2. Mount Bracket:
   • Hold the mounting bracket against the wall at the desired position.
   • Use a level to ensure it is straight. ?
   • Mark the screw hole locations.
   • If mounting on drywall, drill holes and insert anchors.
   • Secure the bracket to the wall using the provided screws. ✔️
3. Attach Bulldog Unit:
   • Align the Bulldog unit with the mounting bracket.
   • Slide the unit down or push it into place until it clicks securely. ?
4. Connect Power/Network:
   • Connect the power adapter (if included).
   • Connect the network cable (if applicable).
5. Initial Setup:
   • Power on the device. ▶️
   • Follow on-screen prompts or refer to the software setup guide for initial configuration.

Troubleshooting

If you encounter issues, please review the following:

Warranty Information

The Bulldog device comes with a [Number]-year limited warranty. For full details, please visit the Puckipuppy website or refer to the warranty card included in the package. ?