Instructions
This product supports direct play on Android/iOS devices, primarily games like PUBG, King of Glory, Knives Out, and others. Enjoy easy control, direct connection, and immediate gameplay without needing any additional applications. (System requirements: Android 6 and above, iOS 11.0 or above).
It supports playing games via Bluetooth connection on Android/iOS devices, PC, and Smart TVs (Windows 7/8/10 compatible).
Supported devices include smartphones, tablets, Smart TVs, and PCs.
Features a telescopic phone holder with a maximum size capacity of ≤86mm.
Designed with an ergonomic structure for a comfortable feel in hand.
Important Notes:
- Due to potential mobile phone system variations, not all individual mobile phones may support this device (e.g., devices on the MediaTek platform might have compatibility issues).
- Official game platforms may undergo software upgrades or source code changes, which could affect gameplay and connection with the gamepad. iPega assumes no responsibility for such changes and reserves the right of final interpretation.
Button Function Instructions
When using this product, please place the device horizontally so that the HOME button is on the right side. This action also resets the default game button settings.
Connection Modes
Direct Play Mode (Android V3)
Press A + [power-symbol] for 2 seconds (Fig. 1) to enter Direct Play Mode (Android V3). The [LED indicator] (LED1) will flash rapidly. Then, search for "PG-9129" in your device's Bluetooth settings and pair (Fig. 2). LED1 will remain lit if the connection is successful. To reconnect, press [power-symbol]; LED1 will flash slowly, indicating automatic re-connection (Fig. 3).
Mapping for Direct Play Mode
Check the default button mapping. If you need to remap buttons, download the "Shootingplus" application and configure mappings within it. For detailed instructions, visit www.ipega.hk.
Android Standard Game Mode
Press X + [power-symbol] for 2 seconds (Fig. 1) to enter pairing mode. LED3 will flash rapidly. Then, search for "PG-9129" on your Android device (phone, tablet, Smart TV) and pair (Fig. 2). LED3 will light up if the connection is successful. For re-connection, press [power-symbol]; LED3 will flash slowly, indicating automatic re-connection (Fig. 3). Download "Octopus" from Google Play for button remapping.
Direct Play Mode (iOS V3)
Press Y + [power-symbol] for 2 seconds (Fig. 1) to enter Direct Play Mode (iOS V3). LED2 will flash rapidly. Then, search for "PG-9129" in your device's Bluetooth settings and pair (Fig. 2). LED2 will remain lit if the connection is successful. To reconnect, press [power-symbol]; LED2 will flash slowly, indicating automatic re-connection (Fig. 3).
PC (BT Receiver) Mode
If your computer lacks Bluetooth functionality, a BT 4.0 wireless receiver is required. Press X + [power-symbol] for 2 seconds to enter Android standard game mode. Once successfully connected to the PC, LED3 will flash rapidly. After connection, press the MODE button; LED3 will flash slowly, indicating automatic re-connection.
TURBO/CLEAR Function
Eight action buttons (A/B/X/Y/L1/L2/R1/R2) can be configured for the TURBO function. These buttons can be manually set for TURBO functionality.
Setting Method:
- To enable TURBO: Long press an action button and the TURBO button simultaneously.
- To cancel TURBO: Long press the same action button and the CLEAR button simultaneously.
The TURBO function will be cleared after turning off or restarting the gamepad. To re-enable TURBO, you must perform the TURBO function reset process again.
Charging / Sleep / Wake / Power Off Functions
- Charging:
- Low battery: LED4 flashes rapidly.
- Charging: LED4 flashes slowly.
- Fully charged: LED4 is lit.
- Sleep / Wake / Power Off Functions:
- The gamepad enters sleep mode after 5 minutes of inactivity.
- Press the [power-symbol] button to reconnect.
- Press and hold the [power-symbol] button for 3 seconds to turn off the device; all LEDs will extinguish.
Controller Diagram
The controller features a standard gamepad layout:
- Left Side: D-Pad, Left Analog Stick (also L3 when pressed down), TURBO button, MODE LED indicator.
- Center: HOME button (Power Switch), charging port, four small [LED indicator] lights.
- Right Side: A/B/X/Y buttons, Right Analog Stick (also R3 when pressed down), CLEAR button.
- Shoulder Buttons: L1/L2 on the left, R1/R2 on the right.
- A telescopic phone holder is mounted above the center.
Refer to the visual diagram for precise button locations.
Notes
- Do not store this product in humid or excessively hot environments.
- Do not drop, disassemble, or otherwise damage the product to prevent malfunction.
- The product contains a built-in battery; do not attempt to replace it yourself. Dispose of the product responsibly according to local regulations, not with general household waste.
- Avoid charging the controller near hot devices or heat sources.
- Unauthorized modifications or repairs to the device may damage the controller and will void the warranty.
Accessories
- Gamepad x1
- User Manual x1
- Micro USB cable x1
The package includes the iPega PG-9129 gamepad, a user manual, and a Micro USB charging cable.
Parameters
| Product dimensions: | 158*102*62mm |
| Product weight: | 163g |
| Voltage: | DC3.7V |
| Current: | <20mA |
| Static current: | <15uA |
| Continuous playtime: | >10H |
| Charging voltage/current: | DC5V/500mA |
| Charging time: | Approx. 2H |
| Bluetooth version: | 4.0 |
| Bluetooth range: | ≤8m |
| Battery capacity: | 400mAh |
| Standby time: | Up to 40 days on a single charge |
