ipega PG-9087S Red Knight Bluetooth Controller - User Manual
Product Features
The ipega PG-9087S Red Knight Bluetooth Controller supports Direct-Play and Connect & Play modes, offering ease of use without requiring activation or additional applications. It is compatible with Android 6.0+ and iOS 11.0-13.3.1 systems.
- Play games on Android/iOS devices, including TVs, tablets, and phones.
- Features a telescopic phone holder, adjustable for phones up to 6.2 inches (15cm).
- Ergonomic design for comfortable handling.
Note: Due to system configurations, some phones (e.g., MediaTek platform) may not support the controller. Controller functionality may be affected by game updates; the manufacturer is not responsible for issues arising from game code changes.
Button Description
The controller features the following buttons and components:
- Left Joystick
- Directional Buttons (D-pad)
- ABXY Buttons
- Right Joystick
- L1/L2 Shoulder Buttons
- R1/R2 Shoulder Buttons
- [HOME Button]
- START Button
- SELECT Button
- [TURBO Button]
- [Power Button]
- Telescopic Holder (for phones < 15cm)
- Charging Port (Micro USB)
- Charging and Mode Indicator LEDs
The controller should be used horizontally with the [HOME Button] positioned on the right.
Specifications
| Parameter | Value |
|---|---|
| Dimensions | L163*W86.8*H36mm |
| Weight | 126.8±5g |
| Working Voltage | DC3.7V |
| Working Current | <15mA |
| Static Current | <15uA |
| Working Time | >15 hours |
| Input Voltage/Current | DC5V/500mA |
| Charging Time | ~3 hours |
| Bluetooth Range | ≤8M |
| Battery Capacity | 400mAh |
| Standby Time (fully charged) | Up to 30 days |
Usage Instructions
Direct Play (Android V3)
To enter Direct Play mode for Android V3: Press and hold the [A Button] + [HOME Button] for 2 seconds. LED1 will flash rapidly. Search for "PG-9087S" on your Android device and pair. LED1 will remain solid upon successful connection. In the future, pressing the [HOME Button] will automatically connect to this device.
Direct Play (iOS)
To enter Direct Play mode for iOS: Press and hold the [Y Button] + [HOME Button] for 2 seconds. LED1 will flash rapidly. Search for "PG-9087S" on your iOS device and pair. LED1 will remain solid upon successful connection. In the future, pressing the [HOME Button] will automatically connect to this device.
Standard Android Mode
To enter Standard Android Mode: Press and hold the [X Button] + [HOME Button] for 2 seconds. LED3 will flash rapidly. Search for "PG-9087S" on your Android device and connect. LED3 will remain solid upon successful connection. In the future, pressing the [HOME Button] will automatically connect.
Game App: Octopus (downloadable from the Google Play Store).
For button remapping and restoring default key settings, download and install the "ShootingPlus V3" application from the App Store/Google Play. By default, the controller is optimized for games like Player's Unknown Battlegrounds.
TURBO Function
The controller's eight buttons ([A Button], [B Button], [X Button], [Y Button], [L1], [L2], [R1], [R2]) can be assigned the TURBO function.
- To set: Hold the desired button and then press the [TURBO Button] to enable the TURBO mode for that button.
- To disable: Hold the button and press the [TURBO Button] again.
Note: TURBO settings are not saved if the controller goes into sleep mode, is turned off, or restarted. They must be re-enabled.
Charging, Sleep, Wake, and Power Off
Charging
- Low Battery: LED4 will flash rapidly.
- During Charging: The LED below the USB port will be solid.
- Fully Charged: The LED below the USB port will turn off.
Sleep/Wake/Power Off
- The controller automatically powers off after 5 minutes of inactivity.
- To wake: Press the [HOME Button] to wake the controller and reconnect.
- To power off: With the controller on, press and hold the [HOME Button] for 3 seconds. The device will turn off, and all LEDs will extinguish.
Package Contents
- 1 x Controller
- 1 x Manual
- 1 x Micro USB Cable
- 1 x Lanyard
