IPEGA PG-9216 Wireless Controller User Manual

Introduction

Please read this manual carefully before using the device. Keep the manual for future reference.

Key Functions

The device requires no specific platform drivers or activation.
Supports Android/iOS tablets, smart TVs, Nintendo Switch (N-S), PlayStation 4 (P4), PlayStation 3 (P3) via wireless connection. Also supports Windows 7/8/10, N-S, and P3 via wired connection.
Features an integrated mobile phone holder with an extension mechanism, accommodating phones up to 75 mm in width.
Ergonomic design ensures a comfortable grip during use.
Supports various cloud gaming platforms.
Compatibility Note: Not all mobile phones are guaranteed to be compatible; compatibility may vary by specific phone model (e.g., phones with MediaTek chipsets may not be supported).
Platform Updates: Due to potential updates to official gaming platform software or changes in source code, some games might become unplayable or unconnectable. The manufacturer and distributor are not liable for any resulting issues.

Product Description

Controller Layout:

The controller features the following components:

Top Buttons: TURBO, HOME, CLEAR.
Left Side: SELECT button, Left 3D analog stick (also functions as L3), L1 and L2 shoulder buttons.
Center: Directional Pad (D-pad).
Right Side: START button, Right 3D analog stick (also functions as R3), R1 and R2 shoulder buttons.
Face Buttons: A, B, X, Y.
LED Indicators: Multiple LED lights indicate status.
Mobile Holder: A bracket designed to hold a mobile phone. The diagram shows the phone placed horizontally, with the HOME button facing towards the right side of the controller.

Specifications

Parameter	Value
Working Voltage	DC 3.7 V
Working Current	< 15 mA
Operating Time	15 hours
Standby Current	< 10 μA
Charging Voltage/Current	DC 5V/500 mA
Wireless Version	5.0
Transmission Distance	< 8m
Battery Capacity	400 mAh
Standby Mode Duration	Up to 30 days on full charge

Connection Modes

Android V3 Direct Connection

Press and hold the A button + HOME button for 2 seconds to enter the Android V3 gaming interface. The LED1 indicator will flash rapidly. On your mobile phone (Android) or tablet, search for "PG-9216" via Bluetooth and pair the device. LED1 will light up steadily upon successful connection. If the device was previously paired, simply press the HOME button, and LED1 will flash slowly.

iOS MFI Mode (iOS 13.0 or higher)

Press and hold the B button + HOME button for 2 seconds to enter MFI mode. The LED2 indicator will flash rapidly. On your mobile phone (iOS) or tablet, search for "DualSHOC 4 Wireless Controller" via Bluetooth and pair the device. LED2 will light up steadily upon successful connection. If the device disconnects, press the HOME button, and LED2 will flash slowly. If previously paired, simply press the HOME button, and LED2 will flash slowly.

(Diagram Note: A screenshot shows iOS Bluetooth settings with "DualSHOC 4 Wireless Controller" listed as a paired device.)

Standard Android Mode

Press and hold the X button + HOME button for 2 seconds to enter this mode. The LED3 indicator will flash rapidly. On your mobile phone (Android) or tablet, search for "PG-9216" via Bluetooth and pair the device. LED3 will light up steadily upon successful connection. If the device was previously paired, simply press the HOME button, and LED3 will flash slowly.

(Diagram Note: A screenshot shows Android Bluetooth settings with "PG-9216" listed as a paired device.)

Wired Connection Mode

Connect the USB data cable to enter this mode. Supports PC/P3/N-S modes.

PC Mode: Connect via USB cable. For PC X-input 360 mode, LED1 lights up. Press and hold HOME for 3 seconds to switch to P3 mode, where LED2 lights up.
N-S Detection: LED assignment indicates mode.
P3 Detection: LED assignment indicates mode; connect via cable for wireless pairing.

Turbo Mode

Supported Buttons for Turbo: A, B, X, Y, L1, L2, R1, R2.

To Enable Turbo Function: Select the desired action button, press and hold it, then press the TURBO button.

To Disable Turbo Function: Select the action button, then press the CLEAR button.

Note: All Turbo functions will be automatically cleared upon device shutdown, entering standby mode, or restarting. Reset the device if you need to re-enable Turbo functionality.

N-S Gaming Mode

Press and hold the R2 button + HOME button for 2 seconds to enter N-S mode. LED2 and LED3 indicators will flash rapidly. Upon successful connection, LED2 and LED3 will light up steadily. If the device was previously paired, simply press the HOME button, and LED2 and LED3 will flash slowly.

P4 Mode

Turn on the P4 console. Connect the controller's USB data cable to the console. Press the HOME button; LED1 will flash rapidly. After connection, LED2 will light up. Disconnect the data cable. Press the HOME button to reconnect.

Charging, Sleep, Activation, and Shutdown

Charging

Low battery: LED4 flashes rapidly.
During charging: LED4 flashes slowly.
Fully charged: LED4 stays lit.

Sleep Mode

If no activity is detected for 5 minutes, the device automatically enters sleep mode.
To wake the device, press the HOME button to re-establish the connection.
To shut down the device manually, press and hold the HOME button for 3 seconds while the device is on. The LED indicator will turn off.

Important Notes

Protect the device from extreme high/low temperatures and high humidity.
Handle the device with care; avoid dropping, impacts, crushing, dirt, and water.
The device contains a built-in battery. Do not attempt to disassemble or misuse the battery.
Do not charge or place the device near appliances that generate heat.
Do not disassemble or tamper with the device in any unauthorized manner.

Package Contents

1x Controller
1x User Manual
1x Type-C Charging Cable
1x Phone Holder

Distributor Information

Sunnysoft s.r.o.

Kovanecká 2390/1a

190 00 Praha 9

Czech Republic

Website: www.sunnysoft.cz

For more information on button mapping, visit www.ipega.hk.

	iPega PG-9156 Batman Gamepad User Manual and Connection Guide Comprehensive user manual for the iPega PG-9156 Batman Gamepad, covering setup, Bluetooth and 2.4G wireless connections for Android, iOS, and PC, button mapping, and features like Turbo mode. Includes specifications, troubleshooting, and package contents.
	iPega PG-9129 Demon Z Wireless Game Controller User Manual Comprehensive user manual for the iPega PG-9129 Demon Z Wireless Game Controller, detailing setup, connection modes for Android, iOS, and PC, TURBO function, charging, and technical specifications.
	ipega PG-9217 Retractable Gamepad User Manual Detailed user manual for the ipega PG-9217 Retractable Gamepad. Learn about its features, setup instructions for Android and iOS devices, standard Android mode, wired connectivity, charging, sleep/wake functions, and included accessories. Includes troubleshooting notes and specifications.
	iPega PG-SW018A Wireless Controller User Manual - Spiderman Edition Comprehensive user manual for the iPega PG-SW018A wireless controller, featuring a Spiderman design. Learn about setup, features, specifications, and troubleshooting for Nintendo Switch, PC, Android, and iOS devices.
	ipega PG-9087S Red Knight Bluetooth Controller - User Manual & Instructions Official user manual for the ipega PG-9087S Red Knight Bluetooth Controller. Learn how to connect, use TURBO mode, charge, and troubleshoot your controller for Android and iOS devices.
	ipega PG-9017S Bluetooth Controller User Manual and Guide Comprehensive guide for the ipega PG-9017S Bluetooth Controller, covering setup, pairing modes (GamePad, Keyboard, iCade, SPP), game compatibility, and troubleshooting for Android, iOS, and PC devices.
	PG-P4010 Ninja run Gamepad User Manual - Ipega User manual for the Ipega PG-P4010 Ninja run Gamepad, detailing its features, connection methods for various platforms (PS3, PC, PS4, Switch), operating modes (XInput, DirectInput), troubleshooting tips, LED indicators, charging information, and technical specifications.
	iPega PG-9083 Retractable Game Controller User Manual This manual provides instructions for the iPega PG-9083 Retractable Game Controller, covering setup, usage modes (Android Mouse, iOS iCade, Nintendo Switch, Android HID, PC wired/wireless), electrical parameters, charging, and troubleshooting.