Blaupunkt BPDVD14 14" Portable DVD Player

General Safety

Read this manual thoroughly before using the Portable DVD Player. Store this manual, the completed warranty card, your receipt, and the product packaging. Safety precautions reduce the risk of fire, electric shock, and injury when complied with. Please follow all instructions and heed all warnings.

CAUTION: RISK OF ELECTRIC SHOCK

The cover (or back) of the unit should not be removed to prevent the risk of electric shock. This unit must be serviced by qualified service personnel only.

Important Information

The lightning flash symbol within the triangle warns of non-insulated dangerous voltage that could cause electric shock. The exclamation point symbol warns of important operating and maintenance instructions.

• Use cabinets or stands recommended by the manufacturer.
• Only use furniture that can safely support the product.
• Ensure the product does not overhang the edge of the supporting furniture.
• Do not place the product on high furniture without securing it and the furniture to a stable support.
• Do not place the product on cloth or other conductive materials.
• Warn children about the dangers of climbing on furniture to reach the television or its controls and call for an adult to assist.
• Do not expose the appliance to rain or moisture, as it may result in fire or electric shock.
• Do not tamper with or modify the product.
• Only use accessories outlined and recommended by the manufacturer.
• Do not expose the product to splashing or water contact.
• Do not place objects filled with liquids, such as vases, on top of the product.
• Danger of explosion if the battery is incorrectly placed. Replace with the same or equivalent type.
• Position the product in a stable location, away from falling hazards.
• Do not use a damaged power cord or plug.
• Do not plug multiple devices into the same outlet to prevent overheating and fire. Ensure the outlet is accessible.
• Do not bend, twist, or kink the power cord excessively.
• The apparatus should not be exposed to dripping or splashing. Dry location use only.
• Do not run the power cord near heat-producing appliances.
• Do not place naked flame sources, such as candles, on the product.
• Do not allow anything to rest on or roll over the power cord.
• Unplug the product during lightning storms or when unused for long periods.
• Do not cover ventilation openings with items like newspapers or tablecloths, as this can cause overheating and fire.

Positioning the Product:

• Place in a well-ventilated area.
• Keep away from direct sunlight or heaters.
• Keep away from splashes or food.
• Protect from excessive dust or grease.
• Do not install in a confined space like a bookcase.
• Avoid placing near heat sources like radiators or stoves.
• Do not place containers with liquids on the unit.
• Do not place small metallic objects on the unit.
• Do not store or use flammable or combustible materials nearby.
• Do not expose the player and remote control to direct sunlight and excessive heat in vehicles.
• Only use the provided power adapter.

Laser Safety

This set uses an optical laser beam system with built-in safeguards. Do not attempt to disassemble. Exposure to this invisible laser light beam may be harmful to the human eye. This is a Class-1 laser product. Use of controls or procedures other than specified may result in hazardous laser light beam exposure. This DVD player should only be serviced by qualified personnel. The laser mechanism is safe when operated according to directions.

Product Overview

Components:

• LCD Display Screen
• Speaker
• Disc Door (Slide to Open)

Front Panel Controls:

• TFT Off: LCD on/off.
• Audio: Adjust audio settings for the loaded DVD.
• Mode: Switch between AV In and DVD mode.
• Mute: Mute volume.
• Volume: Adjust volume.
• Skip Back/Fwd: Skip between chapters or tracks.
• Menu: Access the DVD menu.

Navigation Controls:

• OK/Arrows: Select and navigate on-screen menus.
• Setup: Access the setup menu.
• Stop: Stop playback of the loaded disc.
• Play/Pause: Play or pause the loaded disc.

Side Panel Ports:

• Stereo Headphone Jack
• USB Port
• Memory Card Port
• Audio/Video Output
• DC Power Input
• Power Switch
• AV IN

Indicators:

• Charge Indicator: Red when charging, green when fully charged.
• Power Indicator: Green when powered on.

Remote Control

Buttons and Functions:

• DVD/SD/USB: Select DVD, SD memory card, or USB modes.
• Mute: Mute volume.
• Zoom: Zoom in or out on the loaded DVD.
• Wide: Switch between different aspect ratio settings.
• Setup: Access the setup menu.
• Arrows/OK: Make selections on screen or in menus.
• Menu: Access the loaded DVD's menu.
• Title: Access the title menu of a loaded DVD.
• Audio: Adjust current audio settings.
• Rewind/F.Fwd: Search through chapters or tracks.
• Mode: Switch between AV IN and DVD mode.
• OSD: Display current title and menu information.
• A-B: Create a repeating loop on a specified section.
• Repeat: Repeat the current chapter or track.
• Play/Pause: Play or pause.
• Stop: Stop playback.
• Subtitle: Toggle subtitles on or off.
• Number Keypad: Enter titles and chapters.
• Volume +/-: Adjust volume.
• Angle: View alternate angles on supported DVDs.
• Program: Program a disc to play chapters or tracks in a specified order.
• Search: Search.
• Skip Back/Fwd: Skip between chapters.

Batteries: Requires 2 x AAA batteries (included).

Getting Started

Power and Charging the Battery

DC Power Input: Requires an AC/DC adapter or 12V DC car adapter (included).

• To power the unit, plug the included AC/DC adapter into the unit and a standard wall outlet.
• If using in a car, plug the 12V DC car adapter into the unit and a standard 12V power outlet in the car.

The Power Indicator turns green when the DVD player is powered on. The Charge Indicator turns red when the battery is charging and green when fully charged.

Setup

Loading a DVD or CD

1. Press the Open button to open the Disc Door.
2. Load a disc with the label side facing up.
3. Manually close the Disc Door. The disc will play automatically after loading.

Playing a Loaded Disc

1. Follow the instructions for Loading a Disc.
2. If the disc does not play automatically, press the Play/Pause button.

Programming a Loaded Disc

1. Follow the instructions for Loading and Playing a Disc.
2. While the disc is playing, press the Program button on the remote.
3. Use the Number Keypad to enter titles and chapters in the desired order.
4. DVD titles, chapters, or CD tracks will play in the programmed order. Repeat step 3 until all desired items are programmed.

USB Port

Connecting a USB Thumb Drive: Connect a USB thumb drive to the USB Port. Picture formats (Jpeg) are supported.

Accessing Content on a USB Drive:

1. Follow instructions for Connecting a USB thumb drive.
2. Press the DVD/SD/USB button to enter DVD/SD/USB mode.

SD Card

Connecting an SD Card: Note: Formats are not universally compatible; playback may depend on recording conditions.

1. Follow instructions for Connecting a Memory Card.
2. Press the DVD/SD/USB button to enter DVD/SD/USB mode.

AV Output and Input

Using the 3.5mm AV Output: Connect the 3.5mm to 3 x RCA audio/video cable to the 3.5mm AV output on the DVD player and the composite video and audio input on a television. Audio and video will be output through the connected television.

Using the 3.5mm AV Input: Connect the 3.5mm to 3 x RCA audio/video cable to the 3.5mm AV input on the DVD player and a composite video output on an audio/video source like a television. Press the Mode button on the remote to switch to AV in mode. Audio and video played through the connected television will be output to the DVD player.

Troubleshooting

Specifications

Support

For support, please refer to the contact information provided separately or on the Blaupunkt website.