General Safety
Read this manual thoroughly before you start using the Projector. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduce the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
IMPORTANT INFORMATION
- Only use furniture that can safely support the Products.
- Ensure the Product is not overhanging the edge of the supporting furniture.
- Do not place the product on high furniture without securing both the furniture and the product to a stable support.
- Do not place the product on cloth or other conductive materials.
- Warn children of the dangers of climbing on furniture to reach the projector or its controls and to call for an adult to assist.
- Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard.
- Do not tamper or change or modify the product in any way.
- Only use accessories outlined and recommended by the manufacturer.
- Please do not expose the product to splashing or water contact.
- Please do not place any object on top of the product, including objects filled with liquids such as vases.
Installation Precautions
Please follow instructions when installing this product in accordance with the instruction manual. This product must be positioned in a sufficiently stable location; it can be potentially hazardous due to falling and can cause injury, particularly to children if positioned incorrectly.
- Before installing this Projector set, make sure your outlet voltage corresponds to the voltage stated on the product rating label.
- Do not use a damaged power cord, plug, or loose outlet. Doing so may cause an electric shock.
- Do not plug several devices into the same outlet. Doing so may cause the outlet to overheat and start a fire. Make sure the outlet is readily accessible during operation of the equipment.
- Do not bend, twist, or kink the power adapter excessively.
- Do not allow anything to rest on or roll over the power adapter, as this may cause a fire or an electric shock.
- Do not run the power adapter near heat-producing appliances such as radiators, stoves, or irons. Excessive heat could melt the insulation and expose live wires, resulting in fire or electric shock.
- Unplug this Projector during lightning storms or when unused for long periods of time. Not doing so may result in fire or electric shock.
- Do not cover the ventilation openings of the product with items such as newspapers, tablecloths, curtains, etc., or insert objects into the slots available on the products, as this could result in the product temperature rising and could cause a fire.
- If you notice any unusual odors or smoke around the unit, immediately disconnect the unit from the outlet and contact the service center. Failure to do so may result in fire or electric shock.
- When not using the unit for long periods of time or when you are moving the unit, please ensure to disconnect the power cord from the wall socket.
General Safety (Cont.)
- Please be aware that dust could accumulate over time on the unit and cause it to generate heat and/or deteriorate insulation, which in turn may result in an electrical fire.
- The product is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or young children of any age. They must be supervised by a person responsible for their safety.
- Batteries from the remote control must only be removed by an adult. The adult must ensure to keep them out of reach of infants and children. Seek medical attention immediately if a child has swallowed a battery.
- Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.
- To maintain the product, do not use any chemical or cleaning agent or wet cloth. Please only ensure to utilize a dry cloth to wipe it down from marks or dust and only after unplugging the product from the power socket.
- Please ensure to contact the customer helpline for any repair or service required for the products.
! CAUTION !
DO NOT look directly into the Project LENS. This can cause damage to a person's or children's eyes. Take all necessary precautions to make sure that no one looks into the LENS while turned on.
MAKE SURE this projector is out of reach of children or babies so that they do not stand and look into the project LENS.
DO NOT cover the vents; the vents are needed to let out hot air. Placing objects near or covering the vents can cause the product to overheat and permanently damage the projector.
Positioning Guidelines
Please make sure upon positioning this product, the place is:
- Not wet or damp and well-ventilated.
- Away from direct sunlight or heaters.
- Away from splashes or food.
- Protected from excessive dust or grease.
- Do not install this equipment in a confined space such as a bookcase or similar unit.
- Do not install the Projector set near heat sources such as radiators, stoves, or other audio-visual equipment that produce heat.
- Do not place containers with liquids; if liquid falls inside the products, it may result in short-circuit, fire, or electric shock.
- Do not place small metallic objects on top of the unit. Metal objects falling inside the product may result in short-circuit, fire, or electric shock.
- Do not use or store flammable or combustible materials near the unit, as doing so may result in fire or explosion. Do not place any naked flame sources, such as lit candles, cigarettes, or incense sticks on top of the Projector set.
- Install the unit at a reasonable distance from the wall to ensure sufficient ventilation.
"HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."
Product Overview
The projector features a lens on the front and controls on the top. The top controls include buttons for Source selection, OK confirmation, navigation (Left, Right), and Return. The projector also has a handle for portability.
The rear panel of the projector houses various ports:
- 1. POWER ON/OFF: Button to turn the unit on or off.
- 2. USB Port: For connecting USB storage devices.
- 3. HDMI Port: For connecting HDMI sources.
- 4. IR window: Infrared receiver for the remote control.
- 5. DC IN Plug: Port for the power adapter.
- 6. Micro SD Port: For connecting Micro SD cards.
- 7. AV IN Port: For analog audio/video input.
- 8. Headphone Port: For connecting headphones or external speakers.
Remote Control
Your projector comes with a Remote Control to access and control your projector from a distance. (Batteries not included).
Remote Control Functions:
- Power: Press to power ON. Press twice to power OFF.
- Previous / Next: Press to skip between chapters or tracks.
- Stop: Press to stop playback.
- Flip: Press to flip display image 180°.
- Play/Pause: Press to play or pause an individual chapter or track.
- Arrows/OK: Press to navigate and confirm selections in Settings and other menus.
- Menu: Press to access projector Settings.
- Go To/Number Keypad: Press to enter specific chapter or track numbers. Use Play button to begin playing.
- Mute: Press to mute volume.
- Back / Fwd: Press to search through an individual chapter or track.
- VOL+ / VOL-: Press to adjust audio level.
- Source: Press to select media source (AV, PC, HDMI, MEDIA).
- Exit: Press to exit menus.
- Zoom: Press to zoom display image in or out.
Using the Remote Control:
- Do not mix old and new batteries in the remote.
- Do not use different types of batteries.
- If you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
- Keep batteries away from children and pets.
- Never throw batteries into a fire.
- Do not drop or impact the remote control, as it voids the warranty immediately.
- The remote control operates effectively at a range of 5 to 6 meters.
- Do not expose the remote control sensor to a bright light.
First Time Setup
Make sure to place the projector on a flat and stable surface that is level, so that the projector projects the video/image onto the wall nice and straight.
- Fix the handle onto the unit.
- Plug in the power adapter into the back of the unit (DC IN) and then plug the adapter end into a wall power socket.
Installation
Distance Between Projector and Screen
| Projection Distance | 1m | 2m | 3m |
|---|---|---|---|
| Projection Size | 30 inch | 68 inch | 98 inch |
Light, brightness, etc., will affect the projection distance; this data is for reference only.
Projection Position: It is recommended to place the projector in front of the center of the screen.
A diagram shows a square/rectangle screen with a projector positioned in front of it, indicating the projection beam.
Viewing Options
The projector can be used to project onto a wall or screen, mounted from the ceiling or on a table. When projecting from a rear position, a special screen will be needed (not included) to display the image. Be sure to aim the remote at the sensor on the front or rear of the projector.
Diagrams illustrate four viewing options:
- Front Table: Projector placed on a table facing a screen/wall.
- Rear Ceiling: Projector mounted on the ceiling, projecting onto a screen behind the audience.
- Front Ceiling: Projector mounted on the ceiling, projecting onto a screen/wall in front of the audience.
- Rear Ceiling: (Duplicate description, likely meant to be Rear Projection from table) Projector placed on a table facing a screen behind the audience.
Ceiling Installation
When installing the projector in the ceiling, please purchase a projector mount recommended by an installation professional and follow the instructions that come with the mount. Before installing the projector in the ceiling, please check to make sure the ceiling structure can support the weight of the projector and the mount. If in doubt, please ask for advice from an installation professional.
NOTE: Projector Mount and Screw(s) are not included.
A diagram shows a projector mounted to a ceiling via a hanger. Another diagram shows the top of the projector with a "FIXED HANGER HOLE" indicated.
Adjusting Focus
As shown in the diagram, adjust the lens focus wheel until you get a clear picture. The diagram shows a hand swiping the focus wheel on the side of the projector.
Home Dashboard
The Home Dashboard appears when you finish turning on your projector. It displays options like 'Movie', 'Music', 'Photo', and 'Setup'. The dashboard indicates 'No Device' if no media is connected.
From here, you can select your file types to view, depending on the device you want to project or other media devices and menu options.
Settings
Setting - Picture
To access the PICTURE menu:
- Press the MENU button on the Remote Control.
- With the directional keys, press the RIGHT arrow button to enter PICTURE settings.
- To navigate back to PICTURE/SOUND/OPTION, with nothing selected, press the MENU button.
The PICTURE menu displays:
- Picture Mode: Standard, Mild, Dynamic, User (allows adjustment of contrast, brightness, sharpness, color).
- Colour Temp: Adjust between Medium, Cool, Warm.
- Noise Reduction: Off, Low, Middle, High.
Setting - Sound
To access the SOUND menu:
- Press the MENU button on the Remote Control.
- With the directional keys, press the DOWN arrow button. When on AUDIO, press the RIGHT arrow button to enter SOUND settings.
- To navigate back to PICTURE/SOUND/OPTION, with nothing selected, press the MENU button.
The SOUND menu displays:
- Sound Mode: Standard.
- Treble: 50.
- Bass: 50.
- Balance: 0.
- Auto Volume: Off.
Additional settings include:
- OSD LANGUAGE: Adjust between languages (English is default).
- ASPECT RATIO: Adjust video aspect ratio.
- PROJECTION MODE: Front, F/Ceiling, Rear, Rear/Ceiling.
- RESET: Press Yes to reset your projector settings and device.
- INFO: Display information about the projector.
Setting - Option
To access the OPTION menu:
- Press the MENU button on the Remote Control.
- With the directional keys, press the DOWN arrow button. When on OPTION, press the RIGHT arrow button to enter OPTION settings.
- To navigate back to PICTURE/SOUND/OPTION, with nothing selected, press the MENU button.
The OPTION menu displays:
- OSD Language: English (default).
- Aspect Ratio: 16:9.
- Projection mode: Front.
- Reset: (Functionality implied by name).
- Info: (Functionality implied by name).
Additional settings include:
- OSD LANGUAGE: Adjust between Languages: English (default).
- RESTORE FACTORY: Press Yes to reset your projector settings and device.
- PANEL FLIP ROATATE: Press to flip the screen between Rotate: 0, 1, 2, 3...
Setting - Time
The TIME menu allows adjustment of the projector's clock and timers.
- Clock: Select clock to Day, Month, Year, Hour, and Minutes.
- Off Time: Select turn off time to Off, Once, Every day, Hour, and Minutes.
- On Time: Select turn on time to Off, Once, Every day, Hour, and Minutes.
- Sleep Timer: Select sleep time to Off, 10min, 20min, 30min, 60min, 90min, 120min.
- Auto Sleep: Select auto sleep function to Off, 1hour, 2hours, 4hours, 8hours.
Specifications
| Specification | Details |
|---|---|
| Resolution | 800 x 480 Native Resolution (supports up to 1080p Full HD) |
| Projection Size | Up to 98" (inches) |
| Lumens | 40 ANSI |
| Aspect Ratio | 16:9, 4:3, AUTO |
| Multimedia Playback Format under USB Mode | Movie: AVI / FLV / RMVB / MKV / MP4 / 3GP / MOV / MPG / MPEG / TS / TP / VOB Music: MP3 / WMA / OGG / AAC / FLAC Photo: JPG / PNG / BMP |
| Ratings | 12VDC 3A |
| USB | 5V max. 500mA |
| Dimensions | 142 (w) x 116 (d) x 99 (h) mm |
| Weight | Net: 0.61 kg Gross: 1.1 kg |
| Accessories | 1 x Instruction Manual 1 x Remote Control 1 x Power Adaptor 1 x Warranty Card |
NOTE: This document is for reference only; the operation interface is subject to software.
Customer Helpline
For any inquiries or support, please contact:
Email: info@ayonz.com
Distributed by: Ayonz Pty Ltd
