Eaton 144064
Specifications
Product Details
Image of the Eaton EU5E I/O module, showing its compact form factor, labeling with 'EATON', 'SWD', '24V', 'NOA', 'EUSE-SWD-4PT', 'CE', 'ABLO', '4 rout', 'PT100 PT1000', 'Ni1000', and 'ANG 24-8'.
Catalog Number: 144064
Eaton EU5E I/O module, SmartWire-DT, 24 V DC, 4AI configurable Pt100 / Pt1000: -50 - +200°C, Ni1000: -50 - +150 °C
General Specifications
| Product Name | Eaton EU5E Accessory Input module |
| Catalog Number | 144064 |
| EAN | 4015081405947 |
| Product Length/Depth | 102 mm |
| Product Height | 90 mm |
| Product Width | 35 mm |
| Product Weight | 0.092 kg |
| Certifications |
|
Features & Functions
Electric Connection Type
Flat plug-in connection
Features
- Input, resistance thermometer
- Analog outputs configurable
- Fieldbus connection over separate bus coupler possible
- Analog inputs configurable
Fitted with:
- Display mode for temperatures (°C, °F, raw value)
- Temperature sensors PT100, PT1000 and Ni1000
Functions
- For connection of analog I/O signals
- Adjustable parameter settings
General
Current Consumption
22 mA, SmartWire-DT network
Degree of Protection
- IP20
- NEMA 1
Mounting Method
Top-hat rail fixing (according to IEC/EN 60715, 35 mm)
- Rail mounting possible
- Wall mounting/direct mounting
Overvoltage Category
II
Pollution Degree
2
Product Category
SmartWire-DT slave
Repetition Accuracy
0.5 % (Temperature inputs)
Residual Ripple
≤ 5 % (input voltage)
Terminal Capacity
- 0.25 - 1.5 mm² (24 - 16 AWG), flexible with ferrule, Terminal for I/O sensor
- 0.2 - 1.5 mm² (AWG 24 - 16), solid, Terminal for I/O sensor
Type
Analog modules
Voltage Type
DC
Ambient Conditions
Mechanical
- Constant acceleration: 1 g, 8.4 - 150 Hz, according to IEC/EN 61131-2, Vibrations
- Constant amplitude: 3.5 mm, 5 - 8.4 Hz, according to IEC/EN 61131-2, Vibrations
- Drop and topple: 50 mm Drop height, Drop to IEC/EN 60068-2-31
- Height of fall (IEC/EN 60068-2-32) - max: 0.3 m
- Mounting position: As required
- Shock resistance: 15 g, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 11 ms, 9 Impacts
Climatic Environmental Conditions
- Air pressure: 795 - 1080 hPa (operation)
- Ambient operating temperature - min: -25 °C
- Ambient operating temperature - max: 55 °C
- Ambient storage temperature - min: -40 °C
- Ambient storage temperature - max: 70 °C
- Climatic proofing: Damp heat, constant, to IEC 60068-2-3, Dry heat to IEC 60068-2-2
- Environmental conditions: Condensation: prevent with appropriate measures
- Operating temperature - min: -50 °C
- Operating temperature - max: 55 °C
- Relative humidity: 5 - 95 % (non-condensing, IEC/EN 60068-2-30)
Electromagnetic Compatibility & Electrical Rating
Electromagnetic Compatibility
- Air discharge: 8 kV, according to IEC 61131-2, level 3, ESD
- Burst impulse: 2 kV, Signal cable, according to IEC/EN 61131-2, Level 3; 2 kV, SmartWire-DT cable, according to IEC/EN 61131-2, Level 3; 2 kV, Supply cable, according to IEC/EN 61131-2, Level 3
- Contact discharge: 4 kV, according to IEC/EN 61131-2, Level 2, ESD
- Electromagnetic fields: 1 V/m at 2.0 - 2.7 GHz (according to IEC/EN 61131-2:2008); 10 V/m at 80 - 1000 MHz (according to IEC/EN 61131-2:2008); 3 V/m at 1.4 - 2 GHz (according to IEC/EN 61131-2:2008)
- Radiated RFI: 10 V (IEC/EN 61131-2:2008, Level 3)
- Radio interference class: Class B (EN 55011)
- Surge rating: 1 kV, Surge power cables, Surge (IEC/EN 61131-2:2008, Level 1), EMC; 1 kV, Surge I/O cables, Surge (IEC/EN 61131-2:2008, Level 1), EMC
Electrical Rating
- Power loss: 0.6 W
- Rated operational voltage: 24 V DC (-15%/+ 20% - power supply)
- Supply voltage at AC, 50 Hz - min: 0 VAC
- Supply voltage at AC, 50 Hz - max: 0 VAC
- Supply voltage at DC - min: 0 VDC
- Supply voltage at DC - max: 0 VDC
Communication
Connection to SmartWire-DT
Yes
Connection Type
- Plug, 8-pole, SmartWire-DT
- Push in terminals, Supply and I/O sensor
- Connection plug: external device plug SWD4-8SF2-5,
SmartWire-DT
Data Transfer Rate
Setting automatically: 250 kBit/s, SmartWire-DT
LED Indicator
Status indication of SmartWire-DT network: Green LED
Protocol
Other bus systems
Station
SmartWire-DT slave, SmartWire-DT network
Input/Output
Conversions
250 ms, Temperature inputs
Input
- Inputs, configurable (PT100, PT1000, Ni1000)
- Number of inputs (analog): 4
- Number of outputs (analog): 0
- Resolution: 0.1 °C, Temperature inputs
- Total error: ± 1 %, Temperature Inputs
Safety
- Explosion safety category for dust: None
- Explosion safety category for gas: None
- Potential isolation: Inputs for SmartWire-DT: yes
- Protection against polarity reversal: Yes, for supply voltage (Siemens MPI optional)
- Yes
Design Verification
- Equipment heat dissipation, current-dependent Pvid: 0 W
- Heat dissipation capacity Pdiss: 0 W
- Heat dissipation per pole, current-dependent Pvid: 0 W
- Rated operational current for specified heat dissipation (In): 0 A
- Static heat dissipation, non-current-dependent Pvs: 0.6 W
- 10.2.2 Corrosion resistance: Meets the product standard's requirements.
- 10.2.3.1 Verification of thermal stability of enclosures: Meets the product standard's requirements.
- 10.2.3.2 Verification of resistance of insulating materials to normal heat: Meets the product standard's requirements.
- 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects: Meets the product standard's requirements.
- 10.2.4 Resistance to ultra-violet (UV) radiation: Meets the product standard's requirements.
- 10.2.5 Lifting: Does not apply, since the entire switchgear needs to be evaluated.
- 10.2.6 Mechanical impact: Does not apply, since the entire switchgear needs to be evaluated.
- 10.2.7 Inscriptions: Meets the product standard's requirements.
- 10.3 Degree of protection of assemblies: Meets the product standard's requirements.
- 10.4 Clearances and creepage distances: Meets the product standard's requirements.
- 10.5 Protection against electric shock: Does not apply, since the entire switchgear needs to be evaluated.
- 10.6 Incorporation of switching devices and components: Does not apply, since the entire switchgear needs to be evaluated.
- 10.7 Internal electrical circuits and connections: Is the panel builder's responsibility.
- 10.8 Connections for external conductors: Is the panel builder's responsibility.
- 10.9.2 Power-frequency electric strength: Is the panel builder's responsibility.
- 10.9.3 Impulse withstand voltage: Is the panel builder's responsibility.
- 10.9.4 Testing of enclosures made of insulating material: Is the panel builder's responsibility.
- 10.10 Temperature rise: The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
- 10.11 Short-circuit rating: Is the panel builder's responsibility.
- 10.12 Electromagnetic compatibility: Is the panel builder's responsibility.
- 10.13 Mechanical function: The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Resources
Brochures
Catalogs
- Product Range Catalog Drives Engineering
- SmartWire-DT Catalog
- eaton-product-overview-for-machinery-catalogue-ca08103003zen-en-us.pdf
Declarations of Conformity
Drawings
- eaton-modular-plc-eu5e-i-o-module-dimensions-002.eps
- eaton-modular-plc-eu5e-i-o-module-dimensions.eps
- eaton-general-easy-control-relays-symbol-002.tif
- eaton-modular-plc-swd-eu5e-i-o-module-3d-drawing.eps
- eaton-general-approval-easy-control-relays-standards.jpg
- eaton-general-eu5e-i-o-module-symbol.eps
eCAD Model
- DA-CE-ETN.EU5E-SWD-4PT
Installation Instructions
- IL05006002Z
Installation Videos
- SmartWire-DT in Application
Manuals and User Guides
- MN05006001Z EN
- MN05006002Z EN
mCAD Model
- DA-CS-eu5e_swd_4
- eaton-eu5e-swd-4pt-3d-model.stp
- eaton-eu5e-swd-4pt-drawing.dwg
- DA-CD-eu5e_swd_4
Multimedia
- SmartWire-DT Overview and how to use in easySoft 7
- easyE4 SmartWire-DT module with Remote Touch Display and RMQ multi color indicator
- How to process SmartWire-DT modules using the EASY-COM-SWD-C1 module connected to an easyE4?
Sales Notes & Wiring Diagrams
Sales Notes
- eaton-rmq-chemical-resistance-flyer-fl047011en-en-us.pdf
- eaton-electro-hydraulic-module-eu1h-flyer-fl120003en-en-us.pdf
