IKEA SANNAHED Frame Assembly Instructions
This guide provides step-by-step instructions for assembling the IKEA SANNAHED picture frame.
General Assembly Overview
The initial diagrams illustrate the process of handling the frame and its components. A finger is shown interacting with a frame, and below it, an exploded view shows the layers of the frame: the outer frame structure, a backing board, the artwork or photo, a mat or protective sheet, and a top protective layer. This sequence demonstrates the insertion or adjustment of these elements within the frame.
Step 1: Frame Component Assembly
This step shows an exploded view of the frame's components laid out for assembly. From bottom to top, the parts are depicted as:
- The main frame structure.
- A backing board.
- The artwork or photograph to be displayed.
- A mat or a protective sheet for the artwork.
- A top protective sheet, which is shown being lifted upwards with an arrow indicating movement.
Step 2: Protective Film Removal
This step details the preparation of the frame's protective surfaces. On the left, a hand is shown peeling a protective film from a flat panel, likely the glass or acrylic front of the frame. On the right, a hand holds the assembled frame, and another hand is shown removing a small label or tape from its edge.
© Inter IKEA Systems B.V. 2022. Document Date: 2022-02-14.