HXK80AT KAPPA Tropical Compressor
Superior Efficiency | R600a | 200-240V 50Hz
General Specifications
| Code number | CDO00122 |
| Approvals | EN 60335-2-34 w. Annex AA |
| Compressors on pallet | 100 |
Application Details
| Application Type | LBP |
| Frequency | 50 Hz / 60 Hz |
| Evaporating Temperature Range | -35 to -10 °C |
| Voltage Range | 170 to 264 V |
| Max. Condensing Temperature (continuous, short) | 65 (70) °C |
| Max. Winding Temperature (continuous, short) | 130 (130) °C |
Cooling Requirements
Cooling requirements based on frequency and application type:
| Frequency (Hz) | Application | 32°C | 38°C | 43°C |
|---|---|---|---|---|
| 50 | LBP | S | S | S |
| MBP | S | S | S | |
| HBP | S | S | S | |
| 60 | LBP | S | S | S |
| MBP | S | S | S | |
| HBP | S | S | S |
Legend: S = Static cooling normally sufficient, O = Oil cooling, F1 = Fan cooling 1.5 m/s, F2 = Fan cooling 3.0 m/s necessary, SG = Suction gas cooling normally sufficient, ? = not applicable.
Motor Specifications
| Motor Type | RSCR/RSIR |
| LRA (rated after 4 sec. UL984), HST | LST | 3.8 A |
| Cut in Current, HST | LST | 12.8 A |
| Resistance, main winding (25°C) | 24.8 Ω |
| Resistance, start winding (25°C) | 14.1 Ω |
Design & Physical Characteristics
| Displacement | 8.10 cm³ |
| Oil Quantity (type) | 165 cm³ (mineral) |
| Maximum Refrigerant Charge | 150 g |
| Free Gas Volume in Compressor | 1620 cm³ |
| Weight without Electrical Equipment | 8.1 kg |
Dimensions and Connections
Compressor dimensions and connection details:
| Feature | Specification | Angle | Material / Comment |
|---|---|---|---|
| Height (A) | 167.0 mm | - | - |
| Height (B) | 173.5 mm | - | - |
| Suction Connector (C) | 6.15 mm I.D. | 35° | Cu-plated steel | Rubber plug |
| Process Connector (D) | 6.00 mm O.D. | 35° | Copper | Rubber plug |
| Discharge Connector (E) | 5.15 mm I.D. | 40° | Cu-plated steel | Rubber plug |
| Oil Cooler Connector (F) | - | - | - |
| Connector Tolerance | ±0.05 mm I.D. | - | - |
Diagram Description: The compressor features a main body with overall dimensions indicated. It has three primary connectors: a suction connector (C) with a 6.15 mm I.D. at a 35° angle, a process connector (D) with a 6.00 mm O.D. at a 35° angle, and a discharge connector (E) with a 5.15 mm I.D. at a 40° angle. The suction and discharge connectors are made of Cu-plated steel with rubber plugs, while the process connector is copper with a rubber plug.
Electrical Schematic Description
The electrical system includes a run capacitor, a terminal board incorporating a PTC (Positive Temperature Coefficient) device and an external protector, and a cover. A thermostat with an optional 5th contact is also shown. This configuration is typical for RSCR motor types.
Evaporation Tray Dimensions
Diagram Description: The evaporation tray has dimensions of 243.8 mm, 42.5 mm, 32.7 mm, and 179.5 mm, indicating its size and shape for moisture collection.
Performance Data - EN 12900 Household
Performance data for the HXK80AT compressor under EN 12900 Household test conditions (200V, 50Hz, PTC consumption included, static cooling):
| Evaporating Temp. (°C) | Capacity (W) | Power Consumption (W) | Current Consumption (A) | COP (W/W) |
|---|---|---|---|---|
| -45 | 56.5 | 56.9 | 0.27 | 0.99 |
| -40 | 78.8 | 68.9 | 0.33 | 1.14 |
| -35 | 105 | 80.2 | 0.38 | 1.31 |
| -30 | 115 | 84.0 | 0.40 | 1.37 |
| -25 | 135 | 91.6 | 0.44 | 1.48 |
| -20 | 171 | 104 | 0.50 | 1.64 |
| -15 | 211 | 117 | 0.56 | 1.80 |
| -10 | 258 | 135 | 0.60 | 2.11 |
| -6.7 | 258 | 135 | 0.60 | 2.11 |
| -5 | 258 | 135 | 0.60 | 2.11 |
| 0 | 258 | 135 | 0.60 | 2.11 |
| 5 | 258 | 135 | 0.60 | 2.11 |
| 7.2 | 258 | 135 | 0.60 | 2.11 |
| 10 | 258 | 135 | 0.60 | 2.11 |
| 15 | 258 | 135 | 0.60 | 2.11 |
| 20 | 258 | 135 | 0.60 | 2.11 |
Performance Data - ASHRAE LBP
Performance data for the HXK80AT compressor under ASHRAE LBP test conditions (200V, 50Hz, PTC consumption included, static cooling):
| Evaporating Temp. (°C) | Capacity (W) | Power Consumption (W) | Current Consumption (A) | COP (W/W) |
|---|---|---|---|---|
| -45 | 70.2 | 57.2 | 0.28 | 1.23 |
| -40 | 96.8 | 68.9 | 0.33 | 1.41 |
| -35 | 128 | 80.0 | 0.38 | 1.60 |
| -30 | 140 | 83.8 | 0.40 | 1.67 |
| -25 | 165 | 91.2 | 0.44 | 1.81 |
| -20 | 208 | 103 | 0.50 | 2.02 |
| -15 | 258 | 116 | 0.56 | 2.21 |
| -10 | 258 | 116 | 0.56 | 2.21 |
| -6.7 | 258 | 116 | 0.56 | 2.21 |
| -5 | 258 | 116 | 0.56 | 2.21 |
| 0 | 258 | 116 | 0.56 | 2.21 |
| 5 | 258 | 116 | 0.56 | 2.21 |
| 7.2 | 258 | 116 | 0.56 | 2.21 |
| 10 | 258 | 116 | 0.56 | 2.21 |
| 15 | 258 | 116 | 0.56 | 2.21 |
| 20 | 258 | 116 | 0.56 | 2.21 |
Performance Data - ASHRAE LBP (RC 4 µF)
Performance data for the HXK80AT compressor under ASHRAE LBP test conditions (200V, 50Hz, RC 4 µF, PTC consumption included, static cooling):
| Evaporating Temp. (°C) | Capacity (W) | Power Consumption (W) | Current Consumption (A) | COP (W/W) |
|---|---|---|---|---|
| -45 | 70.2 | 56.0 | 0.27 | 1.25 |
| -40 | 96.8 | 66.8 | 0.32 | 1.45 |
| -35 | 128 | 76.7 | 0.37 | 1.67 |
| -30 | 140 | 79.9 | 0.38 | 1.75 |
| -25 | 165 | 86.2 | 0.42 | 1.91 |
| -20 | 208 | 96.0 | 0.47 | 2.17 |
| -15 | 258 | 107 | 0.51 | 2.42 |
| -10 | 258 | 107 | 0.51 | 2.42 |
| -6.7 | 258 | 107 | 0.51 | 2.42 |
| -5 | 258 | 107 | 0.51 | 2.42 |
| 0 | 258 | 107 | 0.51 | 2.42 |
| 5 | 258 | 107 | 0.51 | 2.42 |
| 7.2 | 258 | 107 | 0.51 | 2.42 |
| 10 | 258 | 107 | 0.51 | 2.42 |
| 15 | 258 | 107 | 0.51 | 2.42 |
| 20 | 258 | 107 | 0.51 | 2.42 |
Test Conditions
| Parameter | EN 12900 Household | ASHRAE LBP |
|---|---|---|
| Condensing Temperature | 55°C | 54.4°C |
| Ambient Temperature | 32°C | 32°C |
| Suction Gas Temperature | 32°C | 32°C |
| Liquid Temperature | No subcooling | 32°C |
Accessories and Mounting
Available accessories and mounting options:
| Accessory / Item | Code Number | Details |
|---|---|---|
| Run capacitor (optional) | - | 6.3 mm spade connectors, 4 µF |
| Terminal board (incl. PTC and external protector) | - | 6.3 mm spade connectors, DAF5 |
| Motor protector | - | AE 18 FU x F5 |
| Cable clamp (screws not included) | 11341000 | - |
| Cover | 15759500 | - |
| Evaporation tray (optional) | 11318802 | - |
| All-in-one equipment (e.g., 4ZN) | 16168000 | Cover / cable clamp + screws / earthing screw |
| Mounting accessories | On request, various options available | - |
