HXK12AT hxk12at cdo00138 r600a 220v 50hz 60hz 09-2017 desd565n102

End of Life (EOL) | Secop — Sustainable Cooling Solutions

PDF preview unavailable. Download the PDF instead.

hxk12at cdo00138 r600a 220v 50hz 60hz 09-2017 desd565n102
HXK12AT KAPPA Tropical Compressor Superior Efficiency R600a 200-240V 50Hz, 208-230V 60Hz

General Code number Approvals Compressors on pallet
Application Application Frequency Evaporating temperature Voltage range Max. condensing temperature continuous (short) Max. winding temperature continuous (short)
Cooling requirements Frequency Application 32°C 38°C 43°C Remarks on application:

CDO00138 EN 60335-2-34 w. Annex AA
100

LBP

Hz

50

60

°C -35 to -10

-35 to -10

V 170 to 264 198 to 253

°C 65 (70)

65 (70)

°C 120 (130)

120 (130)

Hz

50

60

LBP MBP HBP LBP MBP HBP

S­­S­­

S­­S­­

S­­S­­

S = Static cooling normally sufficient O = Oil cooling
F1 = Fan cooling 1.5 m/s (compressor compartment temperature
equal to ambient temperature)
F2 = Fan cooling 3.0 m/s necessary SG = Suction gas cooling normally sufficent ­ = not applicable in this area

Motor Motor type LRA (rated after 4 sec. UL984), HST | LST Cut in Current, HST | LST Resistance, main | start winding (25°C)

RSCR/RSIR

A

­

6.6

A

­

16.4



12.4

12.6

Design Displacement Oil quantity (type) Maximum refrigerant charge Free gas volume in compressor Weight without electrical equipment

cm3

11.10

cm3

165 (mineral)

g

150

cm3

1560

kg

8.90

Dimensions Height
Suction connector
Process connector
Discharge connector
Oil cooler connector
Connector tolerance Remarks:

mm A

167.0

B

173.5

location/I.D. mm | angle C

6.15 | 35°

material | comment Cu-plated steel | Rubber plug

location/O.D. mm | angle D

6.00 | 35°

material | comment

Copper | Rubber plug

location/I.D. mm | angle E

5.15 | 40°

material | comment Cu-plated steel | Rubber plug

location/I.D. mm | angle F

­

material | comment

­

I.D. mm

±0.05

September 2017

DES.D.565.N1.02

1/3

EN 12900 Household

200V, 50Hz, PTC consumption incl., static cooling

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0

Capacity in W

94.1 117 150 163 191 242 301

Power cons. in W

99.9 104 112 116 124 140 158

Current cons. in A

0.57 0.58 0.61 0.63 0.66 0.73 0.82

COP in W/W

0.94 1.13 1.34 1.41 1.54 1.73 1.91

EN 12900 Household Evap. temp. in °C -45 Capacity in W Power cons. in W Current cons. in A COP in W/W

200V, 50Hz, RC 4 µF, PTC consumption incl., static cooling -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0
95 119 151 164 193 244 304 97.3 101 109 113 121 136 154 0.55 0.56 0.59 0.61 0.64 0.71 0.79 0.98 1.17 1.39 1.46 1.60 1.80 1.98

ASHRAE LBP

200V, 50Hz, PTC consumption incl., static cooling

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0

Capacity in W

115 143 183 198 233 295 367

Power cons. in W

99.6 104 112 115 123 139 157

Current cons. in A

0.57 0.58 0.61 0.63 0.66 0.73 0.81

COP in W/W

1.15 1.38 1.64 1.72 1.89 2.12 2.34

ASHRAE LBP

200V, 50Hz, RC 4 µF, PTC consumption incl., static cooling

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0

Capacity in W

116 145 184 200 235 298 371

Power cons. in W

96.9 101 109 112 120 135 153

Current cons. in A

0.55 0.56 0.59 0.6 0.64 0.7 0.78

COP in W/W

1.20 1.44 1.70 1.79 1.96 2.20 2.43

5 7.2 10 15 20 5 7.2 10 15 20 5 7.2 10 15 20 5 7.2 10 15 20

2/3

DES.D.565.N1.02

September 2017

EN 12900 Household Evap. temp. in °C -45 Capacity in W Power cons. in W Current cons. in A COP in W/W
ASHRAE LBP Evap. temp. in °C -45 Capacity in W Power cons. in W Current cons. in A COP in W/W

220V, 60Hz, RC 4 µF, PTC consumption incl., static cooling -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0
112 140 178 194 227 288 359 115 120 130 134 144 162 184 0.66 0.67 0.71 0.73 0.77 0.85 0.95 0.97 1.16 1.37 1.45 1.58 1.78 1.95
220V, 60Hz, RC 4 µF, PTC consumption incl., static cooling -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0
137 170 217 236 277 350 437 115 120 129 133 143 161 183 0.66 0.67 0.71 0.72 0.77 0.85 0.95 1.19 1.43 1.68 1.77 1.94 2.18 2.39

5 7.2 10 15 20 5 7.2 10 15 20

Accessories for

HXK12AT

Code number

50 Hz: run capacitor (optional)

6.3 mm spade connectors

4 F

60 Hz: run capacitor (compulsory) 6.3 mm spade connectors

4 F

Terminal board

6.3 mm spade connectors

(incl. PTC and external protector)

DCFP

Motor protector

AE 72 FU x

FP

Cable clamp (screws not included)

11341000

Cover

15759500

Evaporation tray (optional)

11318802

All-in-one equipment, e.g. 4ZN

Code number

Cover / cable clamp + screws / earthing screw

16168000

Test conditions

EN 12900 Household

Condensing temperature Ambient temperature

55°C 32°C

Suction gas temperature

32°C

Liquid temperature

no subcooling

ASHRAE LBP
54.4°C 32°C 32°C 32°C

Mounting accessories

Code number

on request, various options available

Secop accepts no responsibility for possible errors in catalogs, brochures, and other printed material. Secop reserves the right to alter its products without notice. This also applies to products
already on order provided that such alterations can be made without subsequential changes being necessary to specifications already agreed. All trademarks in this material are the property of the respective companies. Secop and the Secop logotype are trademarks of Secop GmbH. All rights reserved. www.secop.com

3/3

DES.D.565.N1.02

September 2017


Adobe PDF Library 10.0.1 Adobe InDesign CS6 (Windows)