JLab JBuddies Studio Wireless Headphones
User Guide and Setup Instructions
About Your JLab JBuddies Studio Wireless
JLab Audio is proud of its products and dedicated to supporting them. We are committed to providing you with the best audio experience.
Your Warranty: All warranty claims are subject to JLab Audio approval and our sole discretion. Please retain your proof of purchase to ensure warranty service.
Contact Us: For support, email support@jlabaudio.com. Visit intl.jlabaudio.com/register for usage tips, product updates, FAQs, and more. For inquiries, visit intl.jlabaudio.com/contact.
Product Name: JLab JBuddies Studio Wireless Headphones
Warranty: 2-Year Limited Warranty
Support: U.S. Based Customer Support
First-Time Setup: Bluetooth Pairing
Follow these steps to connect your headphones wirelessly:
Enable Bluetooth: On your device (smartphone, tablet, etc.), go to the Bluetooth settings and turn it on.
[Diagram Description: A smartphone screen displaying Bluetooth settings, with the Bluetooth toggle switched to 'On'.]
Prepare Headphones: Ensure your JBuddies Studio headphones are turned off. Then, press and hold the power button for approximately 10 seconds.
[Diagram Description: Close-up of the headphones, highlighting the power button being pressed and held.]
The indicator light will flash rapidly in red and blue, signaling that the headphones are in pairing mode and searching for a device.
Connect Device: On your device's Bluetooth menu, select "JLab JBuddies Studio BT" from the list of available devices to connect.
[Diagram Description: A smartphone screen showing a list of Bluetooth devices, with "JLab JBuddies Studio BT" highlighted and selected.]
Connection Confirmation: Once successfully connected, you will hear two beeps, and the indicator light on the headphones will blink slowly in blue.
[Diagram Description: Headphones shown connected to a device, with a slow blue blinking light on the headphones.]
Important Notes on Bluetooth
- Bluetooth is a wireless radio technology. Its performance can be affected by physical obstructions between the headphones and your device. The headphones are designed for optimal use within 33 feet (10 meters) of your connected device, provided there are no significant obstructions like walls.
- Your JBuddies Studio headphones will remember your device and automatically reconnect when powered on in the future. They can only connect to one device at a time. To connect to a different device, you must first unpair them from the current device via its Bluetooth settings.
- If the Bluetooth connection is interrupted for any reason, please manually reconnect the headphones to your device.
Charging Your Headphones
To charge your JBuddies Studio headphones:
- Connect the included Micro USB cable to the charging port on the headphones.
- Plug the other end into a computer's USB port or a 5-volt, 1-amp (or lower) USB power adapter.
[Diagram Description: A Micro USB cable connecting the headphones to a computer USB port.]
Indicator Lights: The light will show "Charging" while connected to power and turn off or indicate "Fully Charged" when complete.
Headphone Controls
Familiarize yourself with the controls on your JBuddies Studio headphones:
- [Micro USB Charging Port]: Located on the headphones for charging.
- [AUX Port]: Allows for wired connection.
- [Power Button]: Press and hold for 3 seconds to turn the headphones on or off. A slow blue blinking light indicates the headphones are powered on.
- [Volume Up / Track Forward Button]: Single press to increase volume. Double press to skip to the next track.
- [Volume Down / Track Backward Button]: Single press to decrease volume. Double press to go to the previous track.
- [Multi-function Button]: Single press to play/pause audio, answer an incoming call, or hang up a call.
- [Voice Assistant Button]: Double press to activate your device's voice assistant (e.g., Siri or Google Assistant).
- Re-pairing and Additional Devices: If the power is off, press and hold the power button for 10 seconds to re-initiate pairing mode or connect to additional devices.
Wired Connection
You can also use your JBuddies Studio headphones with a wired connection. Simply plug the included AUX cable into the [AUX Port] on the headphones and the other end into the headphone jack of your audio device.
[Diagram Description: Headphones connected to a smartphone using an AUX cable.]
Sharing Mode
Share your audio experience with a friend. Connect the included AUX cable to the [AUX Port] on one pair of JBuddies Studio headphones, and then connect the other end to the [AUX Port] of another wired headphone or earphone.
[Diagram Description: Two sets of headphones. The first set is connected to a device via Bluetooth. An AUX cable connects the first set of headphones to the second set of headphones via their respective AUX ports, allowing audio sharing.]
Important Safety Information & Warnings
- Avoid exposing the headphones to any moisture or liquids.
- Do not expose the headphones to extreme temperatures (heat or cold) or high humidity.
- Avoid dropping or crushing the headphones, or subjecting the cable to sudden or excessive strain. Avoid bending the cable at sharp angles.
- Earwax may accumulate on the headphones, leading to reduced sound quality. Carefully remove earwax using a cotton swab or other fine tools to improve sound quality.
- If you experience any discomfort or pain, try reducing the volume or taking a break from using the headphones.
- If pain persists when using this product, discontinue use and consult a medical professional.
- Treat your headphones with care, similar to how you would treat eyeglasses. Store them in a safe place when not in use.
Resources
For more information, visit:
- Shop Products: Explore the full JLab Audio range.
- Product Alerts: Stay updated on product news.
- JLab Audio + Burn-in Tool: Optimize your audio experience.
Website: intl.jlabaudio.com
Download our app:
