JLab JBuddies Studio Wireless Headphones

Your Warranty & Support

YOUR WARRANTY: All warranty claims are subject to JLab Audio's approval and discretion. Keep your receipt to ensure your warranty is valid.

CONTACT US: Contact us at support@jlabaudio.com or visit intl.jlabaudio.com/contact

REGISTER TODAY: Visit intl.jlabaudio.com/register for product updates, usage tips, FAQs, and more.

FIRST-TIME SETUP: BLUETOOTH PAIRING

1. Step 1: Enable Bluetooth

   Turn on Bluetooth in your device settings.

   [Smartphone screen showing Bluetooth settings enabled]

2. Step 2: Prepare Headphones

   With the JBuddies Studio wireless headphones off, press and hold the power button [⏻] for approximately 10 seconds. A rapidly flashing red and blue light indicates they are searching for a Bluetooth device.

   [Diagram of headphones with power button highlighted, showing red/blue flashing light]

3. Step 3: Connect

   Select 'JLab JBuddies Studio BT' in your device settings to connect. When the headphones are paired, you will hear two beeps and the blue light will flash slowly.

   [Smartphone screen showing 'JLab JBuddies Studio BT' selected, headphones with slow blue flashing light]

Notes:

• Bluetooth is a wireless radio technology sensitive to objects between the headphone and connected device.
• The headphone is designed for use within 33 feet (10 meters) of an unpaired device, without major obstructions (like walls).
• Once connected, the headphone will remember your device and automatically pair when powered on in the future. Only one device can be connected at a time. To pair another device, first unpair the current device via its Bluetooth settings.
• If the Bluetooth connection is lost for any reason, manually reconnect your Bluetooth device.

CHARGING

Connect the Micro USB cable to a computer or USB 5V 1A (or less) output device.

[Diagram showing Micro USB cable connecting to headphones, computer USB, and wall adapter. Indicators show "CHARGING" and "FULL CHARGE"]

CONTROLS

[Diagrams of headphones showing button locations]

• Volume Up / Track Control: Press [Volume Up ➕] or [Track Forward ⏩].
• Power / Play, Pause, Call: Press [Power ⏻] to turn on/off, or 1 click for [Play/Pause/Answer/End Call ▶️/⏸️].
• Activate Voice Assistant: 2 clicks for Siri (iOS) or "OK Google" (Android).
• Re-pairing and Additional Devices: When power is off, press and hold the power button [⏻] for 10 seconds.
• Volume Up / Volume Down: 1 click.
• Track Forward / Track Back: Press and hold for 2 seconds.

SHARE MODE

Connect the included AUX CABLE to either side of another JBuddies Studio or any other wired headphones/earbuds for Share Mode.

[Diagrams showing AUX cable connecting one JBuddies Studio headphone to another, labeled "EITHER SIDE"]

WIRED MODE

Connect the AUX CABLE to a device for a wired connection.

[Diagram showing AUX cable connecting headphones to a smartphone, labeled "EITHER SIDE" and "WITH"]

WARNINGS

• Avoid getting moisture or liquid on the earcups.
• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the headphones, and do not strain the cable by pulling or bending it sharply.
• Earwax can build up on the earcups and degrade sound quality. Gently remove earwax with a cotton swab or other small tool to improve sound quality.
• If you experience discomfort or pain, try lowering the volume or taking a break from using the earbuds.
• If you frequently experience discomfort while using the product, discontinue use and consult a doctor.
• We recommend treating your headphones like a pair of fine sunglasses and storing them in a safe place when not in use.

Shop & Resources

Find more JLab Audio products, get product notifications, or use the Burn-in Tool.

[Apple App Store icon] Download on the App Store | [Google Play icon] Get it on Google Play

Visit us at: intl.jlabaudio.com