Sunshade Tent and Cooling Canopy Instructions
Product ID: 7AINV
Distributed by GARVEE.com
For support, please contact: support@garvee.com
Product Overview
This document provides assembly instructions for the GARVEE Sunshade Tent and Cooling Canopy, Product ID 7AINV. The initial illustration depicts a modern residential setting with a swimming pool, highlighting the potential use of this canopy for outdoor shade and comfort.
Parts Included
- 1 x Main Frame Structure (collapsible)
- 8 x Support Poles/Rods
- 4 x Stakes/Anchors (for securing to the ground)
- 1 x Canopy Fabric
- 1 x Carrying Bag (implied)
Assembly Steps
Step 1: Expand the Frame
Two individuals are shown pulling outwards on the central joints of a collapsed, accordion-like frame, extending it horizontally. Arrows indicate outward movement to begin unfolding the structure.
Step 2: Secure Joints
A close-up view illustrates a hand pushing a pin or locking mechanism into place at a joint of the expanding frame. This action secures the extended sections, ensuring stability.
Step 3: Lower and Lock
The frame is partially extended and is being pushed downwards from the top center. Arrows indicate downward motion, signifying the process of locking the frame into its final erected height.
Step 4: Fully Extended Frame
The canopy frame is shown fully erected and stable, with its legs extended to their maximum height. It is now ready for the canopy fabric to be attached.
Step 5: Attach Canopy Fabric
Two individuals are shown lifting and draping the canopy fabric over the top of the fully erected frame. Arrows indicate the fabric being placed downwards onto the structure, covering the frame.
Step 6: Secure Canopy
The canopy is now fully set up. The illustration shows the edges of the canopy fabric being pulled taut and secured to the ground using stakes or anchors, possibly with ropes. Close-up details show how the stakes might be inserted into the ground or attached to the canopy's loops for firm anchoring.
