Pioneer YN020GLSI24M2G / (2x) RT0xxGLSILCFHG Dual Circuit Ducted Inverter Heat Pump Set
Submittal Sheet
System Full Set Model: YN020GLSI24M2G
AHRI Reference Number: 217048772
Cooling Mode Performance
| Rated Cooling | 17,000 BTU/hr |
| Ambient Range | 5°F ~ 131°F |
| SEER Rating | 21.0 BTU/W·h |
| EER Rating | 12.0 BTU/W·h |
* 100% Capacity @ Indoor DB 80°F/WB 67°F
Heating Mode Performance
| Rated Heating | 19,000 BTU/hr |
| Ambient Range | -13°F ~ 86°F |
| HSPF2 IV (V) | 9.5 (8.2) BTU/W·h |
| COP (47°F) | 3.5 (W/W) |
*High Heat (47°F) = 19,000 BTU / Low Heat (17°F) = 17,400 BTU / COP (5°F) = 1.9
Electrical Information
| Cooling | Heating | |
|---|---|---|
| Rated Input (W) | 1,410 | 1,490 |
| Rated Current (A) | 6.3 | 6.7 |
| Breaker Needed | 25A (Double-Pole) | |
| Power Supply | 208~230V, 1Ph, 60Hz | |
Piping and Refrigerant
| Liquid Line (OD) | 1/4" (2) |
| Suction Line (OD) | 3/8" (2) |
| Refrigerant Precharge | R454b (Selectable Lineset) |
| Vertical Run/Elevation Diff. | 50 ft. / 33 ft. |
Exterior Unit (Condenser) Specifications
| Sound Level (dBA) | 58 |
| Recommended Room Size | 300~750 Sq. ft. |
| Minimum Room Size | 68 Sq. ft. |
| Compressor | Twin-Rotary |
| Dimensions (WDH) | 36"-1/2 x 15" x 27"-1/2 |
| Weight (lbs) | 92.6 |
Compatible Indoor Air Handler Units
| RT009GLSILCFHG (9K) | RT012GLSILCFHG (12K) | |
|---|---|---|
| Quantity | 2 (Up to 24,000 BTU) | |
| Max Circuit Length | 80 ft. (9K) / 100 ft. (12K) | |
| Max Vertical Run | 33 ft. (9K/12K) | |
| Adjustment Charge | 0.11 oz x (L1+L2-50 ft.) | |
Condenser Unit Dimensional Data (YN020GLSI24M2G)
The condenser unit dimensions are provided in a diagram with labels A through E.
| Label | Imperial | Metric |
|---|---|---|
| A | 23-1/8" | 586 mm |
| B | 13-3/4" | 348 mm |
| C | 15" | 380 mm |
| D | 36-1/2" | 927 mm |
| E | 27-1/2" | 699 mm |
The diagram shows a front view of the condenser unit with dimensions labeled A (width), D (depth), and E (height). Side views show dimensions B (width of internal components) and C (depth of internal components).
Air Handler Unit Dimensional Data
Dimensional data for the Pioneer air handler units is provided in diagrams, detailing overall dimensions and clearances.
RT009GLSILCFHG Air Handler
| Label | Imperial | Metric |
|---|---|---|
| A | 27-5/8 in | 701.7 mm |
| B | 7-7/8 in | 200 mm |
| C | 19-3/8 in | 492.1 mm |
| D | 17-3/4 in | 450.9 mm |
| E | 1-3/4 in | 44.5 mm |
| F | 20-1/8 in | 511.2 mm |
| G | 1/8 in | 3.2 mm |
| H | 5-1/2 in | 139.7 mm |
| I | 23-5/8 in | 600.1 mm |
| J | 7-3/8 in | 187.3 mm |
| K | 1-3/8 in | 34.9 mm |
| L | 29-1/8 in | 739.8 mm |
| M | 11-3/4 in | 298.5 mm |
Clearances:
- Air Inlet: Requires ≥ 40 in (100 cm) clearance.
- Side View Clearance: Requires ≥ 4 in (10 cm) clearance.
- Front View Clearance: Requires ≥ 10 in (25 cm) and ≥ 20 in (50 cm) clearance depending on the side.
RT012GLSILCFHG Air Handler
The RT012GLSILCFHG air handler shares the same dimensional specifications and clearance requirements as the RT009GLSILCFHG model.
| Label | Imperial | Metric |
|---|---|---|
| A | 27-5/8 in | 701.7 mm |
| B | 7-7/8 in | 200 mm |
| C | 19-3/8 in | 492.1 mm |
| D | 17-3/4 in | 450.9 mm |
| E | 1-3/4 in | 44.5 mm |
| F | 20-1/8 in | 511.2 mm |
| G | 1/8 in | 3.2 mm |
| H | 5-1/2 in | 139.7 mm |
| I | 23-5/8 in | 600.1 mm |
| J | 7-3/8 in | 187.3 mm |
| K | 1-3/8 in | 34.9 mm |
| L | 29-1/8 in | 739.8 mm |
| M | 11-3/4 in | 298.5 mm |
Clearances:
- Air Inlet: Requires ≥ 40 in (100 cm) clearance.
- Side View Clearance: Requires ≥ 4 in (10 cm) clearance.
- Front View Clearance: Requires ≥ 10 in (25 cm) and ≥ 20 in (50 cm) clearance depending on the side.
Combination Data and Miscellaneous Information
RT009GLSILCFHG (Air Handler) Specifications
| Airflow Rate (cfm) | 335 (Turbo)/305 (Hi)/276 (Med)/182 (Lo)/182 (Mute) |
| Sound Level (dBA) | 42 (Turbo)/39 (Hi)/34 (Med)/28 (Lo)/28 (Mute) |
| Auto Air Circulation | 2-Way Louver (Up-Down + Left-Right) |
| Dimensions (WDH) | 27"-1/2 x 19"-1/4 x 7"-7/8 |
| Weight (lbs) | 33.1 |
RT012GLSILCFHG (Air Handler) Specifications
| Airflow Rate (cfm) | 360 (Turbo)/330 (Hi)/270 (Med)/210 (Lo)/180 (Mute) |
| Sound Level (dBA) | 44 (Turbo)/41 (Hi)/35 (Med)/33 (Lo)/32 (Mute) |
| Auto Air Circulation | 2-Way Louver (Up-Down + Left-Right) |
| Dimensions (WDH) | 27"-1/2 x 19"-1/4 x 7"-7/8 |
| Weight (lbs) | 33.1 |
Matching Table (2 Circuits Utilized)
| Indoor Unit Capacity | Outdoor Unit Capacity |
|---|---|
| 9000 BTU | 9000 BTU |
| 12000 BTU | 9000 BTU |
| 12000 BTU | 12000 BTU |
| 18000 BTU | 9000 BTU |
Piping Diameters
| Capacity | Liquid Line | Suction Line |
|---|---|---|
| 9000 BTU | 1/4" | 3/8" |
| 12000 BTU | 1/4" | 3/8" |
(All Necessary Adapters Provided with Condenser)
Note: If the total demand from indoor units exceeds the outdoor unit's rated capacity, individual unit capacity will be adjusted. Each indoor unit operates at a self-regulated capacity (30%-100% of rated capacity) based on zone demand or can turn off.
Warranty Information and Length
Complete warranty details are available online at https://www.pdhvac.com/support/warranty/.
This system is eligible for up to a 5-year limited warranty on the compressor and 5 years on other internal parts, provided it is installed and registered within 90 days. Unregistered installations qualify for a 1-year parts/compressor warranty.
Outstanding Features
- LED Display
- Energy Saving
- Ultra-Thin Design
- Dual Drain Options
- Customizable Timer
- Eco-Friendly Refrigerant
- Whisper-Quiet Operation
- Power Loss Memory Recovery
Available Accessories
| Part Number | Description |
|---|---|
| IKT-LCVR4P-KIT | Decorative PVC Line Cover Kit |
| IKT-LNBR-1/4-3/8 | BendAid Flexible Easy Bender Kit |
| BRK-FRM-C-2P | Folding Mounting Bracket w/ Leveler |
| IKT-UVL32UL-AG | UVC Bacterial Disinfection Kit |
| IKT-SURPRK-DV2 | Ultimate Surge and Power Protection |
