Pioneer YN040GLSI24M4G Quad (4) Circuit Ducted Inverter Heat Pump Set Submittal Sheet

Overview and Performance

This document provides submittal data for the Pioneer Quad (4) Circuit Ducted Inverter Heat Pump Set, model YN040GLSI24M4G.

Cooling Mode Performance

Specification	Value
Rated Cooling	34,000 BTU/hr
Ambient Range	5°F ~ 131°F
SEER Rating	20.0 BTU/W·h
EER Rating	11.7 BTU/W·h

Performance is based on 100% Capacity @ Indoor DB 80°F/WB 67°F.

Heating Mode Performance

Specification	Value
Rated Heating	36,000 BTU/hr
Ambient Range	-13°F ~ 86°F
HSPF2 IV (V)	8.5 (7.3) BTU/W·h
COP (47°F)	3.2 (W/W)

High Heat (47°F) = 36,000 BTU / Low Heat (17°F) = 22,400 BTU / COP (5°F) = 1.9.

Electrical Information

Specification	Value
Specification	Cooling	Heating
Rated Input (W)	2,950	2,650
Rated Current (A)	13.2	11.9
Breaker Needed	35A (Double-Pole)
Power Supply	208~230V, 1Ph, 60Hz

Piping and Refrigerant

Specification	Value
Liquid Line (OD)	1/4" (4)
Suction Line (OD)	3/8" (4)
Refrigerant Precharge	R454b (Selectable Lineset)
Vertical Run/Elevation Diff.	50 ft. / 33 ft.

This combination is Energy-Star certified. ?

Exterior Unit (Condenser) Specifications

Specification	Value
Sound Level (dBA)	65
Recommended Room Size	700~1,350 Sq. ft.
Minimum Room Size	111 Sq. ft.
Compressor	Twin-Rotary
Dimensions (WDH)	42"1-/4 x 18"-3/8 x 33"-1/2
Weight (lbs)	145.5

Compatible Indoor Air Handler Units

Model	Quantity	Capacity Range
RT009GLSILCFHG (9K)	4 (Up to 48,000 BTU)	(9K)
RT012GLSILCFHG (12K)		(12K)
RT018GLSILCFHG (18K)		(18K)
RT024GLSILCFHG (24K)		(24K)

Piping and Circuit Lengths

Specification	Value
Max Circuit Length	80 ft. (9K) / 100 ft. (12K/18K/24K)
Max Vertical Run	33 ft. (9K/12K/18K/24K)
Adjustment Charge	0.11 oz x (L1+L2+L3+L4-100 ft.)

Dimensional Data - Condenser Unit

Pioneer YN040GLSI24M4G (36,000 BTU / 4-Zone)

Diagram shows a rectangular outdoor unit with fan grille and access panels. Key dimensions are labeled A through E.

Label	A	B	C	D	E
Inches	26"	18-1/4"	18-3/8"	42-1/4"	33-5/8"
Millimeters	660 mm	462 mm	468 mm	1074 mm	853 mm

Dimensional Data - Indoor Air Handler Units

RT009GLSILCFHG

Diagrams show the indoor unit from Supply Side, Inlet Side, Side View, Above View, and Below View. Key dimensions are labeled A through M.

Label	A	B	C	D	E	F	G	H	I	J	K	L	M
Inches	27-5/8"	7-7/8"	19-3/8"	17-3/4"	1-3/4"	20-1/8"	1/8"	5-1/2"	23-5/8"	7-3/8"	1-3/8"	29-1/8"	11-3/4"
Millimeters	701.7 mm	200 mm	492.1 mm	450.9 mm	44.5 mm	511.2 mm	3.2 mm	139.7 mm	600.1 mm	187.3 mm	34.9 mm	739.8 mm	298.5 mm

Installation Clearances

Air Inlet: ≥ 40 in (100 cm) clearance required.

Side View: ≥ 4 in (10 cm) clearance required on sides.

Front View: ≥ 10 in (25 cm) clearance required in front; ≥ 20 in (50 cm) clearance required below.

RT012GLSILCFHG

Diagrams show the indoor unit from Supply Side, Inlet Side, Side View, Above View, and Below View. Key dimensions are labeled A through M.

Label	A	B	C	D	E	F	G	H	I	J	K	L	M
Inches	27-5/8"	7-7/8"	19-3/8"	17-3/4"	1-3/4"	20-1/8"	1/8"	5-1/2"	23-5/8"	7-3/8"	1-3/8"	29-1/8"	11-3/4"
Millimeters	701.7 mm	200 mm	492.1 mm	450.9 mm	44.5 mm	511.2 mm	3.2 mm	139.7 mm	600.1 mm	187.3 mm	34.9 mm	739.8 mm	298.5 mm

RT018GLSILCFHG

Diagrams show the indoor unit from Supply Side, Inlet Side, Side View, Above View, and Below View. Key dimensions are labeled A through M.

Label	A	B	C	D	E	F	G	H	I	J	K	L	M
Inches	36-1/4"	7-7/8"	19-3/8"	17-3/4"	1-3/4"	28-3/4"	1/8"	5-1/2"	32-1/4"	7-3/8"	1-3/8"	37-3/4"	11-3/4"
Millimeters	920.8 mm	200 mm	492.1 mm	450.9 mm	44.5 mm	730.3 mm	3.2 mm	139.7 mm	819.2 mm	187.3 mm	34.9 mm	958.9 mm	298.5 mm

RT024GLSILCFHG

Diagrams show the indoor unit from Supply Side, Inlet Side, Side View, Above View, and Below View. Key dimensions are labeled A through M.

Label	A	B	C	D	E	F	G	H	I	J	K	L	M
Inches	43-3/4"	7-7/8"	19-3/8"	17-3/4"	1-1/8"	36-5/8"	1/8"	5-1/2"	40-5/8"	7-1/4"	1-3/8"	37-7/8"	14-3/8"
Millimeters	1110.1 mm	200 mm	492.1 mm	450.9 mm	28.6 mm	930.3 mm	3.2 mm	139.7 mm	1030.3 mm	182.6 mm	34.9 mm	960.4 mm	365.1 mm

Combination Data and Specifications

Air Handler Specifications

Model	Airflow Rate (cfm)	Sound Level (dBA)	Auto Air Circulation	Dimensions (WDH)	Weight (lbs)
RT009GLSILCFHG	335(Turbo)/305(Hi)/276(Med)/182(Lo)/182(Mute)	42 (Turbo)/39 (Hi)/34 (Med)/28 (Lo)/28 (Mute)	2-Way Louver (Up-Down + Left-Right)	27"-1/2 x 19"-1/4 x 7"-1/8	33.1
RT012GLSILCFHG	360(Turbo)/330(Hi)/270(Med)/210(Lo)/180(Mute)	44 (Turbo)/41 (Hi)/35 (Med)/33 (Lo)/32 (Mute)	2-Way Louver (Up-Down + Left-Right)	27"-1/2 x 19"-1/4 x 7"-1/8	33.1
RT018GLSILCFHG	500(Turbo)/426(Hi)/370(Med)/300(Lo)/283(Mute)	48 (Turbo)/44 (Hi)/41 (Med)/36 (Lo)/33 (Mute)	2-Way Louver (Up-Down + Left-Right)	35"-1/2 x 19"-1/4 x 7"-7/8	39.7
RT024GLSILCFHG	741(Turbo)/623(Hi)/558(Med)/529(Lo)/470(Mute)	51 (Turbo)/49 (Hi)/46 (Med)/39 (Lo)/34 (Mute)	2-Way Louver (Up-Down + Left-Right)	43"-1/4 x 17"-3/4 x 7"-1/8	50.7

Matching Table (# Circuits Utilized)

Number of Circuits	Capacity Combinations
2-Circuits	(9000-24000) + (9000-24000)
3-Circuits	(9000-24000) + (9000-18000) + (9000-12000)
4-Circuits	(9000-18000) + (9000-12000) + (9000-12000) + (9000-12000)

Piping Diameters

BTU Capacity	Line Size
9000 BTU	1/4" (Liquid) - 3/8" (Suction)
12000 BTU	1/4" (Liquid) - 3/8" (Suction)
18000 BTU	1/4" (Liquid) - 1/2" Adapter Required (Suction)
24000 BTU	1/4" (Liquid) - 5/8" Adapter Required (Suction)

All necessary adapters are provided with the condenser.

Note on System Operation: If the total demand from the combined group of indoor units exceeds the rated capacity of the outdoor unit, the capacity of each indoor unit will be adjusted accordingly. Each indoor unit operates at a self-regulated capacity (30% to 100% of rated capacity) based on actual zone demand, or may turn off.

Warranty Information and Features

Warranty Information and Length

Complete warranty details are available with the vendor or online at https://www.pdhvac.com/support/warranty/. This high-quality system is eligible for up to 10 years limited warranty on the compressor, and 7 years on other internal parts. To qualify for this warranty, the system must be installed within 90 days by a registered technician. Installations registered otherwise default to 5 years parts/compressor. Unregistered products qualify for only 1 year parts/compressor warranty.

Outstanding Features

LED Display
Energy Saving
Ultra-Thin Design
Dual Drain Options
Customizable Timer
Eco-Friendly Refrigerant
Whisper-Quiet Operation
Power Loss Memory Recovery

Available Accessories

Part Number	Description
IKT-LCVR4P-KIT	Decorative PVC Line Cover Kit
IKT-LNBR-1/4-3/8	BendAid Flexible Easy Bender Kit
BRK-FRM-C-2P	Folding Mounting Bracket w/ Leveler
IKT-UVL32UL-AG	UVC Bacterial Disinfection Kit
IKT-SURPRK-DV2	Ultimate Surge and Power Protection

Document provided by Parker Davis HVAC International, Inc.

	PIONEER Quint (5) Circuit Ducted Inverter Heat Pump System Submittal Sheet & Specifications Detailed submittal sheet and specifications for the PIONEER Quint (5) Circuit Ducted Inverter Heat Pump System, including cooling/heating performance, electrical data, dimensional information, and compatible indoor units.
	Parker Davis Pioneer YN030GLSI24M3G Triple Circuit Ducted Inverter Heat Pump Submittal Sheet Technical submittal sheet for the Parker Davis Pioneer YN030GLSI24M3G multi-zone ducted inverter heat pump system. Details cooling/heating performance, electrical specs, piping, dimensions for condenser and indoor units (RT009, RT012, RT018), features, and warranty.
	Pioneer YN040GLSI24M4G Quad-Zone Ductless Inverter Heat Pump Submittal Sheet Technical specifications and dimensional data for the Pioneer YN040GLSI24M4G Quad-Zone Ductless Inverter Heat Pump Set, including indoor and outdoor unit details, performance ratings, and compatibility.
	Pioneer Quad-Zone Ductless Inverter Heat Pump Set Submittal Sheet YN040GLSI24M4G This document provides detailed specifications, performance data, dimensional information, and compatibility details for the Pioneer Quad-Zone Ductless Inverter Heat Pump Set, model YN040GLSI24M4G, which supports multiple indoor air handler units.
	Pioneer YN020GLSI24M2G Dual Circuit Ducted Inverter Heat Pump System Submittal Sheet Detailed submittal sheet for the Pioneer YN020GLSI24M2G Dual Circuit Ducted Inverter Heat Pump Set, including performance specifications, dimensions, electrical data, and compatible indoor units (RT009GLSILCFHG, RT012GLSILCFHG).
	PIONEER RT018GLSI24RPG Ceiling-Concealed Ducted Inverter Heat Pump - Technical Specifications and Features Detailed submittal sheet for the PIONEER RT018GLSI24RPG Ceiling-Concealed Ducted Inverter Heat Pump, including cooling and heating performance, electrical specifications, dimensions, outstanding features, and available accessories.
	Pioneer Quantum Ultra 12,000 BTU Ductless Heat Pump System Submittal Sheet Submittal sheet for the Pioneer Quantum Ultra 12,000 BTU 23 SEER2 wall-mounted ductless inverter heat pump system. Details cooling and heating performance, electrical specifications, unit dimensions, piping, refrigerant, warranty, features, and accessories from Parker Davis HVAC International.
	Pioneer Multi-Zone Free-Match Air Conditioner Parts Diagrams Comprehensive parts catalog for Pioneer Multi-Zone Free-Match ductless, ducted, or both residential and light-commercial air conditioning and heat pump systems. Features detailed parts lists for various outdoor and indoor unit models.

Overview and Performance

Cooling Mode Performance

Heating Mode Performance

Electrical Information

Piping and Refrigerant

Exterior Unit (Condenser) Specifications

Compatible Indoor Air Handler Units

Piping and Circuit Lengths

Dimensional Data - Condenser Unit

Pioneer YN040GLSI24M4G (36,000 BTU / 4-Zone)

Dimensional Data - Indoor Air Handler Units

RT009GLSILCFHG

Installation Clearances

RT012GLSILCFHG

RT018GLSILCFHG

RT024GLSILCFHG

Combination Data and Specifications

Air Handler Specifications

Matching Table (# Circuits Utilized)

Piping Diameters

Warranty Information and Features

Warranty Information and Length

Outstanding Features

Available Accessories

Related Documents