Important Safety Instructions
When using electrical products, basic precautions should always be followed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
- Do not use seasonal products outdoors. This seasonal use product is not intended for permanent installation or use.
- Do not mount or place near gas or electric heaters, fire places, candles or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Unplug the product when leaving the house, when retiring for the night, or if left unattended.
- This is an electrical product - not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played with or placed where small children can reach it.
- Do not use this product for other than its intended use.
- Do not hang ornaments or other objects from cord, wire or light string.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Do not cover the product with cloth, paper or any material not part of the product when in use.
- This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short-circuit may be present and the product should be discarded.
- Read and follow all instructions that are on the product or provided with the product.
- Children must be supervised to ensure that items are not used as toys.
- To reduce the risk of fire and electric shock:
- Disconnect decorative item from power source before performing any maintenance or cleaning activity.
- Do not place or hang near gas installations or electric heaters, fireplaces, candles, or other similar heating sources.
- Disconnect the item when leaving the house, going to bed, or if left unattended.
- Do not cover decorative item with fabric, paper or any material that is not part of the product when it is being used.
- Do not use decorative item outdoors.
Use and Care Instructions
Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain on the product conductors, connections, and wires. When not in use, store neatly in a cool, dry location protected from sunlight.
User Servicing Instructions: Fuse Replacement
How to replace the fuse:
- Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
- Open the fuse cover. Slide the fuse access cover on top of the attachment plug towards the blades.
- Remove the fuse carefully.
- Risk of fire. Replace fuse only with the 5amp, 125 Volt fuse provided with the product.
- Close the fuse cover. Slide the fuse access cover on top of the attachment plug to close it.
CAUTION
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.
WARNING
Deviation from the assembly instructions may result in a risk of fire or electric shock.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
This decorative item is not intended for use by people (including children) whose physical, sensory or mental capabilities are different or reduced, or who lack experience or knowledge, unless they are otherwise supervised.
Assembly Instructions
Step 1: Prepare the Lamp Holder
Take the lamp holder assembly. Screw the threaded part of the lamp holder into the central fixture component. Ensure it is securely fastened.
Step 2: Secure the Lamp Holder Assembly
Fit the central fixture component with the attached lamp holder onto the base structure. Ensure it is properly seated.
Step 3: Install the Light Bulb
Carefully screw the light bulb into the lamp holder. Ensure it is seated correctly.
Step 4: Attach the Main Lampshade Structure
Align the main pleated lampshade structure with the lamp holder assembly. Gently push the structure onto the assembly until it clicks into place. You may hear a "Click!" sound indicating a secure connection.
Step 5: Insert Decorative Rings
Take the decorative rings. Insert them into the designated slots within the lampshade structure. Follow the visual guides to ensure correct placement and orientation.
Step 6: Secure Lamp Holder to Shade
Connect the lamp holder assembly to the lampshade structure. Push the components together until they click, ensuring a secure fit.
Step 7: Adjust Shade Structure
Gently adjust the position of the lampshade structure. Use your fingers to guide the pleats and ensure even spacing.
Step 8: Secure Lamp Holder
Ensure the lamp holder assembly is firmly secured to the lampshade structure. A "Click!" sound may indicate a secure connection.
Step 9: Adjust Shade Structure
Continue adjusting the lampshade structure for proper alignment and appearance. Pay attention to the placement of the pleats.
Step 10: Secure Lamp Holder
Confirm that the lamp holder assembly is securely attached to the lampshade structure. Listen for a "Click!" to verify.
Step 11: Adjust Shade Structure
Make any final adjustments to the lampshade structure to achieve the desired look. Ensure all parts are aligned correctly.
Step 12: Finalize Shade Assembly
Complete the assembly of the lampshade structure. Ensure all components are properly fitted and secured.
Step 13: Route the Power Cord
Carefully guide the power cord through the designated opening in the lampshade structure.
Step 14: Secure the Power Cord
Wrap the power cord around the base of the lamp holder assembly as indicated, approximately five times, to manage excess cord length and ensure a tidy appearance.
Save These Instructions
Keep these instructions for future reference.
