Rexing V3C Dash Cam Quick Start Guide

Warranty Activation

Activate your 18-Month Warranty and choose your FREE Gift!

Activate within 30 days of purchase to claim your free gift and extend your limited 12-month warranty to 18 months.

Scan the QR code to activate and select your free gift.

Visit: https://www.rexingusa.com/productreg/

1. Overview

Thank you for choosing REXING! We hope you love your new product as much as we do. If you need assistance, or have any suggestions to improve it, please contact us.

You can reach us via care@rexingusa.com or call us at (203)800-4466. Our support team will respond as soon as possible.

Always a surprise in Rexing. Check us out here:

• [Facebook]
• [Instagram]
• [Website Support/Registration]

Follow us on: [Facebook] [Instagram] [Site] [TikTok]

2. What's in the Box

The package contains the following items:

1. V3C Quick Start Guide: The main setup document.
2. Safety Guide: Important safety information.
3. 3M Adhesive Mount: A mount with adhesive tape for attaching the camera to the windshield.
4. Cable Adhesive Spacer: Small adhesive clips to help manage cables.
5. Cable Management Tool: A plastic tool for tucking cables neatly.
6. Rexing V3C Dashboard Camera: The main dash cam unit.
7. Car Power Connector (12ft): A 12V DC charger with a cable for powering the camera in the vehicle.
8. 32GB SD Card: A microSD card for storing recordings.
9. Warning Sticker: A sticker indicating the device is protected by Rexing Dash Cams.
10. Electrostatic Sticker: A clear sticker for windshield mounting.

Installation Note: Paste the electrostatic film on the front windshield. Paste the bracket into the designated circular area on the film.

3. Camera Overview

The Rexing V3C camera has several components:

Front View:

Features the lens and the display screen. Buttons include:

• 1. 4 IR Lights: Infrared lights for enhanced night vision.
• 2. Power Button / Screen Toggle Button: Turns the device on/off and toggles the screen.
• 3. Menu Button / Mode Button: Accesses menus and changes modes.
• 4. Up Navigation Button / Front and Rear Switch Button: Navigates menus and switches camera views.
• 5. Down Navigation Button / Mic Button: Navigates menus and controls the microphone.
• 6. OK (Confirm) Button / Emergency Lock Button / Record Button: Confirms selections, locks current footage, and starts/stops recording.

Top View:

• 7. Micro SD Card Slot: For inserting the memory card.
• 8. Power / USB Charging Port: Connects to the car charger or computer.
• 9. Reset Button: Resets the device.
• 10. Rear Camera Port: (Currently no support)

Side View:

Contains buttons for operation.

Bottom View:

Features the mounting point for the bracket.

LED Indicator: The camera is recording when the LED is flashing red. The device is charging or powered on when the LED is solid red.

Screen Icons

The dash cam display shows various icons:

• Exposure Value (EV): Adjusts brightness.
• WDR Mode: Wide Dynamic Range for better image contrast.
• Wi-Fi Status: Indicates if Wi-Fi is connected or not connected.
• Recording Time: Shows the duration of the current clip.
• G Sensor Level: Indicates the sensitivity to impacts.
• Recording Status: Shows if the camera is recording or in standby.
• Loop Recording Time: Duration for continuous recording segments.
• Video Resolution: Displays the current video quality (e.g., FHD P30).
• Current clip (Locked): Indicates if the current recording is protected from being overwritten.
• MIC Status: Shows if the microphone is on or off.
• Date and Time: Displays the current date and time.
• IR Lights: Indicates if infrared lights are active.
• Battery Charging: Shows the charging status.
• Memory Card: Indicates if a memory card is inserted.
• Memory Card Remaining Time: Displays available storage space.

4. Installation

Step 1: Installing the Electrostatic Stickers

1.1 Prepare Your Windshield: Thoroughly cleanse your windshield with either water or alcohol. Wipe it dry using a clean, dry cloth to ensure a spotless surface.

1.2 Position the Sticker: Carefully peel off the protective film from the electrostatic sticker. Attach the sticker to the windshield, ideally behind the rear-view mirror, to avoid obstructing your view.

Step 2: Install the Dash Cam Mount

Place the 3M tape on the mount and properly orient the mount square to the roof and hood line of the vehicle. Firmly press the mount onto the windshield. Wait at least 20 minutes before mounting the camera to ensure proper adhesion.

Step 3: Insert the Memory Card

The Rexing V3C accepts [Class 10/UHS-3 or higher] Micro SD memory cards up to 256GB. Insert a memory card before recording. Before inserting or removing a memory card, ensure the device is powered down. Gently push the memory card into the slot until it clicks. Allow the spring release to push the card out.

Step 4: Power the Camera and Format the Memory Card

Power on the camera by connecting the charger to the car cigarette lighter and camera. To ensure the V3C records properly, format the memory card within the camera before using it for the first time. Always back up important data from the memory card before formatting.

To format the memory card:

1. Ensure the memory card is inserted and the device is powered on by connecting it to a power source.
2. Press the [OK Button] to stop recording.
3. Press the [MENU Button] twice to enter the System Setup Menu.
4. Use the [Up Button] and [Down Button] to navigate to the "Format" setting.
5. Press the [OK Button] to confirm formatting the card. A confirmation message will appear (e.g., "All date will be deleted").
6. Press the [OK Button] again to confirm the deletion.

You may now disconnect from power. The camera will shut down after 3 seconds. It should begin recording automatically the next time it is powered on.

Step 5: Installing the Camera onto the Windshield

Place the camera on the mount. Carefully route the power cable around the windscreen and tuck it under the trim.

Plug the car charger cable into a 12V DC power outlet or the car cigarette lighter. Connect the car charger to the camera. The camera will auto-start recording once it's powered on.

5. Basic Operation

Device Power

The device automatically powers on when plugged into a 12V accessory socket or cigarette lighter and the vehicle is started. To turn the device on manually, press and hold the [Power Button] until the welcome screen appears. The camera will automatically start recording when powered on.

Menu Settings

Power the camera on. If the camera is recording, press the [OK Button] to stop recording.

Hold the [MENU Button] to toggle through modes. Press the [MENU Button] once to enter the settings menu for a Mode. Press the [MENU Button] twice to enter the System Settings (Setup).

Video Recording

The camera automatically starts recording when the device receives charge. The LED lights and red dot will blink while recording. Press the [OK Button] to stop recording.

Video Playback

Playback of videos can be done on the device or a computer.

To playback a video on the device, toggle to the Playback mode. Use the [Up Button] and [Down Button] to toggle to the desired video. Press the [OK Button] to play.

During playback, use the [OK Button] (pause), [Up Button] (rewind), and [Down Button] (fast forward) to control the video playback.

Playback on Computer

To playback a video on the computer, you can either use an SD card adapter or connect the device directly using the USB cable.

Using an SD Card Adapter: Remove the memory card from the dash cam and insert it into an SD card adapter. Place the adapter into your computer's card reader.

Using a USB Cable: Connect the USB cable to the device and the computer. After the device is powered on, press the [OK Button] to select "Mass Storage".

On the computer, navigate to the device drive. Videos are stored at: \CARDV\MOVIE. Locked videos are stored at: \CARDV\MOVIE\RO.

Select the video to playback.

Wi-Fi Connect

Step 1

With your dash cam powered on, hold the [Up Button] to enable the Wi-Fi function. The Wi-Fi name (SSID) and password for the dash cam will be displayed on-screen.

Step 2

On your mobile device, navigate to your Wi-Fi settings. Connect to your dash cam's Wi-Fi by tapping its name when it appears. Enter your dash cam's Wi-Fi password if prompted.

Note: On some mobile devices, you may need to try connecting more than once. To ensure a successful connection, your mobile device's screen should resemble the examples shown.

Step 3

Once connected to the dash cam, open the Rexing Connect app on your mobile device. Select "Keep Trying Wi-Fi" if you see a notification about not being connected to the internet.

Step 4

In the app, tap the "Connect" button to connect to your dash cam, allowing you to access live view and download your recordings.

Note: Hold the [Up Button] for 2 seconds to disconnect the Wi-Fi.

Rexing Connect App

Easily download the app by searching the App Store or Google Play. You can also scan the QR codes provided in the original document.

Wi-Fi Connect Troubleshooting

If you cannot connect your phone to the dash cam using the Rexing Connect app, please visit:

https://www.rexingusa.com/wifi-connect/

Or scan the QR code provided in the original document.

Taking Photos

To take a photo, stop video recording and toggle to the Photo Mode. Press the [OK Button] to take a photo.

To view a photo, stop video recording and toggle to the Playback Mode. Press the [Up Button] and [Down Button] to toggle through your photos.

To delete a photo, stop video recording, toggle to the Playback Mode, and navigate to the photo you want to delete. Press the [MENU Button] to toggle the Delete option. Press the [OK Button] and select "Delete Current" or "Delete All".

Parking Monitor (Parking Surveillance Mode)

The parking monitor provides surveillance on your parked vehicle. When the engine is off, a hardwire kit (sold separately) provides continuous power and protects your car battery from being discharged.

Option 1: Vibration Detection

To enable the Parking Monitor, connect it with a Smart Hardwire Kit (sold separately). This feature allows the dash cam to switch to parking mode automatically when the vehicle's engine turns off and switch back to normal recording when the engine turns on.

Gravity Sensing Record: The Gravity Sensing detects significant or sudden movement (such as an impact or collision) and triggers an event recording. It is suggested to set the "Gravity Sensing" to High sensitivity for Parking Mode Recording.

Note: If you do not use the parking mode function, change the Gravity Sensing sensitivity to low. Otherwise, videos may be easily locked and cannot be deleted by the loop recording function, potentially filling the memory card with locked videos and causing the recorder to fail. Please DO NOT ENABLE the Parking Monitor function without connecting a smart hardwire kit, as it may cause a malfunction.

Option 2: Motion Detection

To use this feature, connect it with a Rexing Intelligent Hardwire Kit (sold separately). Ensure that the Parking Mode is turned off on your dash cam, otherwise it may cause a malfunction.

Once the sensor detects motion, the intelligent hardwire kit powers up the dash cam automatically and starts recording until the motion is cleared.

For installation tutorials, please visit: https://www.rexingusa.com/hwk-install/ or scan the QR code provided in the original document.

FCC Compliance

FCC ID: 2AW5W-V3

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Symbols: [FC] [RoHS] [CE]

Made in China.