Compact Wireless Keyboard

Product Contents:

• 1 x Compact Keyboard
• 1 x USB-A 2.4Ghz Receiver
• 1 x Instruction Manual

Product design may vary

Indicators:

• Low Battery
• Caps Lock

Connecting via the Receiver:

• Remove the battery cover on the back of the keyboard.
• Install 2 AAA batteries, aligning the '+' and '-' symbols.
• Switch the power to 'on'.
• Hold Fn+3; the Caps Lock indicator will flash red when ready to pair.
• Plug the receiver into your computer. It will automatically pair to the keyboard. The indicator will fade when pairing is successful.
• Note: To use the media keys, hold Fn and press the secondary function (play/pause, volume up/down, etc.) you'd like to use.

Connecting via Wireless Pairing:

• Remove the battery cover on the back of the keyboard and install 2 AAA batteries, aligning the '+' and '-' symbols.
• Switch the power to 'on'.
• Hold Fn+1 or Fn+2; the Low Battery indicator will flash blue, indicating pairing mode.
• Use your device to pair with "PCCK001". The indicator will fade when pairing is successful.
• The keyboard can connect to two devices simultaneously. Press Fn+1 or Fn+2 to switch between them.
• Note: The keyboard will automatically pair the same way next time it is powered on. The indicator will flash blue to show it is in wireless pairing.

Troubleshooting:

• If the keyboard is not connecting, ensure the receiver is properly plugged in or that wireless pairing is enabled on your device.
• If the keyboard is not responding, check if the battery is low. If so, replace the battery.
• For connectivity issues, move closer to the device or reduce interference from other wireless devices.
• Ensure your device is running the latest software by performing a 'software update' in your device's settings.

Safety:

• Do not use near any water source.
• Do not modify or repair this device.
• Do not use chemical detergents for cleaning; use a soft, dry cloth.
• WARNING: The battery shall not be exposed to excessive heat such as sunshine or fire.

Product Requirements:

• PC with a USB-A port
• 2 x AAA Batteries

LED Indicators:

• Caps Lock Indicator: Flashing Red = 2.4G Pairing; Solid Red = Caps Lock
• Low Battery Indicator: Flashing Blue = BT1 & BT2 Pairing

Keyboard Multimedia Keys:

• Fn Key + F1 = Brightness +
• Fn Key + F2 = Brightness -
• Fn Key + F3 = Home
• Fn Key + F4 = Screenshot
• Fn Key + F5 = Search
• Fn Key + F6 = Lock
• Fn Key + F7 = Previous Track
• Fn Key + F8 = Play/Pause
• Fn Key + F9 = Next Track
• Fn Key + F10 = Mute
• Fn Key + F11 = Volume -
• Fn Key + F12 = Volume +

Technical Specifications:

• Keyboard Model: PCCK001
• FCC ID: 2A023-PCCK001
• Receiver Model: YZW2
• FCC ID: 2AO23-YZW2
• Receiver Input: DC 5V
• Working distance: 8~10m

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Contact Information:

• Distributed by Chug, Inc.
• Address: 7157 Shady Oak RD, Eden Prairie, MN 55344
• For repair information and parts, contact the original manufacturer at: customersupport@gemsfindyours.com
• Website: gemsfindyours.com