VEVOR DSH-D1 Hot Air Tool

About the VEVOR DSH-D1 Hot Air Tool

This document serves as the primary instruction manual for the VEVOR DSH-D1 Hot Air Tool. It provides essential guidance on safe operation, setup, and maintenance. VEVOR is committed to offering competitive pricing on tools.

Key Safety Information

Prioritize safety by adhering to the following guidelines:

• Read all instructions carefully before operation.
• Warning: Live components are exposed when the tool is open. Always unplug before servicing.
• Inspect power cords and connectors for damage before use.
• Be aware of fire and explosion hazards, especially near combustible materials.
• Avoid contact with hot surfaces to prevent burns. Allow the tool to cool down before handling or storage.
• Operate the tool under supervision. It is not intended for unsupervised use by children.
• Protect the device from moisture.
• Repairs should only be performed by authorized service centers using genuine parts.

Operating Instructions

Startup Procedure:

1. Connect the tool to a suitable power source.
2. Activate the power switch.
3. Set the desired temperature using the adjustment knob.
4. Allow approximately three minutes for the tool to reach operating temperature.

Shutdown Procedure:

1. Set the temperature knob to the lowest setting ("0").
2. Allow the tool to cool down for approximately five minutes.
3. Turn off the power switch.
4. Disconnect the power plug from the outlet.

Technical Specifications

Detailed technical data, including voltage, power, temperature range, and airflow, is available within the document.

Correct Disposal

In accordance with European Directive 2012/19/EC, this product must not be disposed of with household waste. It requires separate collection for recycling of electrical and electronic equipment.