SIMRISHAMN Floor Lamp
[IKEA logo] Design and Quality IKEA of Sweden
Important Safety Information
For indoor use only.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If you are uncertain, please contact IKEA.
Safety warnings are also provided in multiple languages: German, French, Dutch, Danish, Icelandic, Norwegian, Finnish, Swedish, Czech, Spanish, Italian, Hungarian, Polish, Estonian, Latvian, Lithuanian, Portuguese, Romanian, Slovak, Slovenian, Croatian, Greek, Turkish, Chinese (Simplified & Traditional), Ukrainian, Serbian, Indonesian, Malay, Arabic, Thai, Japanese.
Parts and Tools Required
The assembly process requires the following components and tools:
- 1x Hex key [hex key]
- 6x Screws [screw]
- 1x Wrench [wrench]
- 3x Glass globes [glass globe]
Diagram: Initial assembly confusion followed by interaction with IKEA product.
Step 1: Connect Pole Sections
Lay out the lamp components on a flat surface. Connect the first two main pole sections together. This involves screwing them together, as indicated by the "2x" close-up.
Diagram: Connecting pole sections with a threaded joint (2x).
Step 2: Add Another Pole Section
Attach the next pole section to the assembled poles. This connection also uses a screw-in mechanism, indicated by "3x" in the close-up view.
Diagram: Adding another pole section with a threaded joint (3x).
Step 3: Attach Base and Connect Wires
Connect the base of the lamp to the main pole assembly. Inside the base, connect the wires to the appropriate terminals, labeled 1, 2, and 3, as shown in the close-up view ("3x").
Diagram: Attaching the base and connecting wires to terminals 1, 2, 3 (3x).
Step 4: Attach Upper Pole Section
Connect the uppermost pole section to the base assembly. This is done by screwing the sections together, as illustrated in the close-up.
Diagram: Attaching the top pole section to the base assembly.
Step 5: Secure the Base
Secure the base of the lamp. The close-up shows a mechanism being pushed to lock it in place, indicated by "3x".
Diagram: Securing the base with a click mechanism (3x).
Step 6: Final Wire Connections
Complete the electrical connections within the base. The diagram shows the wires being routed and secured, with a close-up detailing the connection points and a securing mechanism.
Diagram: Finalizing wire connections in the base.
Step 7: Route and Secure Wires
Ensure all wires are properly routed and secured within the base. The close-up view shows the final arrangement of the wires, indicated by "3x".
Diagram: Routing and securing wires (3x).
Step 8: Attach Lamp Arms
Attach the lamp arms to the main pole structure. The close-up illustrates a "click" mechanism for securing the arms.
Diagram: Attaching lamp arms with a click mechanism.
Step 9: Install Bulbs
Insert the light bulbs into the sockets on the lamp arms. The diagram shows the process of placing the bulbs.
Diagram: Inserting light bulbs.
Step 10: Screw on Glass Globes
Carefully screw the glass globes onto the lamp arms. The diagram shows the globes being attached by rotation.
Diagram: Screwing on glass globes.
