ÅRSTID Floor Lamp

Safety Information

For indoor use only.

If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. If you are uncertain, please contact IKEA.

(Note: Original document also contains safety information in Hebrew.)

Assembly Steps

Step 1: Prepare the Pole

Begin by disassembling the lamp pole. A section of the pole is shown being unscrewed. A small component, possibly a cap or connector, is indicated to be removed and placed into a trash receptacle.

Step 2: Reassemble the Pole

Continue assembling the lamp pole. The diagram shows the pole sections being joined together, with a close-up view illustrating how the sections screw into each other. The pull chain for the light is visible at the top.

Step 3: Attach the Base

Secure the base of the lamp. The illustration shows a person kneeling and attaching the weighted base to the bottom of the assembled pole. A tool, likely a wrench or Allen key, is depicted being used to tighten a connection point on the base.

Step 4: Install the Lamp Holder

Attach the part that holds the light bulb. The diagram shows the top section of the lamp pole, where the socket and wiring are housed. Components are shown being fitted onto the pole, with an arrow indicating upward movement for attachment.

Step 5: Attach the Lampshade

Complete the assembly by adding the lampshade. The final diagram shows the assembled lamp with the pleated lampshade placed on top of the lamp holder, secured by a ring or cap.