Important Safety Information
This section provides crucial safety information regarding the flexible cable of the SIMRISHAMN floor lamp. If the external flexible cable or cord of this luminaire is damaged, it must be exclusively replaced by the manufacturer, their authorized service agent, or a similarly qualified person to avoid hazards. If you are uncertain about the procedure or who to contact, please consult IKEA.
Parts and Tools Included
- Allen Key (1x)
- Wrench (1x)
- Screws (6x)
- Base Components (3x circular pieces)
Assembly Instructions
-
Step 1: Connect Pole Sections
Begin by connecting the main pole sections. The diagram shows a person kneeling, holding two pole sections and aligning them. An inset view illustrates a threaded connection being screwed together, indicated by a '2x' label.
-
Step 2: Continue Connecting Pole Sections
Continue assembling the pole structure by connecting more sections. The diagram shows a person kneeling, holding pole sections and aligning them. An inset view shows a threaded connection being screwed together, indicated by a '3x' label.
-
Step 3: Attach Lamp Heads and Wire
Attach the three lamp heads to the top of the pole structure. An inset view shows a connection point labeled '3'. Another inset shows a threaded connection being secured with the Allen key. A third inset illustrates wires being fed through a section, with labels '1', '2', and '3' indicating wire order.
-
Step 4: Secure Pole to Base
Align the assembled pole structure with the lamp base. The diagram shows a person positioning the pole onto the base. An inset view illustrates a threaded connection being rotated to secure the pole to the base.
-
Step 5: Connect Internal Wiring
Connect the internal wiring within the lamp base. The diagram shows the base of the lamp. An inset view shows a hand pressing a wire connector into place, indicated by a '3x' label.
-
Step 6: Secure Wiring Connections
Ensure the wiring connections are secure. The diagram shows the base of the lamp with wires. An inset view illustrates wires being connected and secured using the provided wrench.
-
Step 7: Finalize Wiring
Complete the wiring connections. The diagram shows the base of the lamp with wires. An inset view shows wire connectors being secured, indicated by a '3x' label.
-
Step 8: Attach Base Cover
Attach the base cover to the lamp. The diagram shows the base of the lamp. An inset view shows a hand pressing a cover into place until it clicks, indicated by the text 'Click!' and a sound icon [?].
-
Step 9: Install Light Bulbs
Install the light bulbs into the lamp sockets. The diagram shows the lamp standing upright. An inset view illustrates a light bulb being screwed into a socket, indicated by directional arrows [⬆️/⬇️].
-
Step 10: Attach Glass Shades
Attach the glass shades to the lamp heads. The diagram shows the lamp with bulbs installed. An inset view illustrates a glass shade being rotated and placed onto a fixture, indicated by directional arrows [?].
