Richmat HJC56 BLE Control Box
Brand: Richmat
Model: HJC56 Ble
1. Remark
- Up to 4 motors
- BLE control available
- Memory function
- Color: black
2. Dimension (mm)
A textual description of the dimensions is provided, showing the length, width, and height of the control box from different angles. The main unit has a length of 109.2 mm, a width of 136.7 mm, and a depth of 38 mm. The rear view shows a width of 119.2 mm and a depth of 83.7 mm.
3. System Configuration Diagram
The system configuration diagram illustrates the connections between the control box, motors, remote control, and power supply. It shows the placement of various components labeled with numbers, indicating how they are integrated into the system. The diagram includes a remote control, the main control box, motors (labeled HEAD, FOOT), and other accessories, all connected via wires and ports.
Note: Before powering on, please install the accessories in place according to the system configuration diagram.
4. Remote Control Button Silicone Diagram
The remote control features a comprehensive layout of buttons, each assigned a number and a function. These include buttons for TV, LOUNGE, ZG, and SNORE positions, as well as controls for head and foot movement (UP, DOWN), memory functions (M1, M2), and a FLAT button. There are also buttons for timer functions, mode selection, and a flashlight.
5. Fixed Position Size
| Position | ZG | LOUNGE | TV | SNORE |
|---|---|---|---|---|
| Head (mm) | 49 | 127 | 149 | 30 |
| Foot (mm) | 125 | 83 | 94 | 0 |
6. Remote Control Function Description
| Button Label | Function |
|---|---|
| 1 | Press to move to the TV position. Alternate function: Press and hold FLAT while pressing TV to record the current motor status to the TV position. (Power-off memory clear) |
| 2 | Press to move to the LOUNGE position. Alternate function: Press and hold FLAT while pressing LOUNGE to record the current motor status to the LOUNGE position. (Power-off memory clear) |
| 3 | Press to move to the ZG position. Alternate function: Press and hold FLAT while pressing ZG to record the current motor status to the ZG position. (Power-off memory clear) |
| 4 | Press to extend the back motor to its maximum stroke. Release to stop. |
| 5 | Press to retract the back motor to 0mm. Release to stop. |
| 6 | Partner Control key: Cycles through three options for controlling beds A, B, or both A and B, indicated by lights on the decorative strip. |
| 7 | Press to move to the SNORE position. Alternate function: Press and hold FLAT while pressing SNORE to record the current motor status to the SNORE position. (Power-off memory clear) |
| 8 | Press to extend the leg motor to its maximum stroke. Release to stop. |
| 9 | Press to retract the leg motor to 0mm. Release to stop. |
| 10 | Press to move to memory position 1. Alternate function: Press and hold FLAT while pressing M1 to record the current motor status to memory position 1. (Not cleared after power failure) |
| 11 | Press to move to memory position 2. Alternate function: Press and hold FLAT while pressing M2 to record the current motor status to memory position 2. (Not cleared after power failure) |
| 12 | One key to restore the motor reset position. The control box will automatically perform a reset operation after power on. |
| 13 | Controls the head massage motor. Press to activate or enhance vibration intensity (3 levels). Press again to turn off the massager. (Default 30min off) |
| 14 | Bed bottom lamp on/off (default 5min off). |
| 15 | Controls the foot massage motor. Press to activate or enhance vibration intensity (3 levels). Press again to turn off the massager. (Default 30min off) |
| 16 | Reuse function button: Sets the working time for the next massage motor to 10, 20, or 30 minutes. The timing is indicated by two indicator lights. |
| 17 | Press to turn on the flashlight; release to turn it off. |
| 18 | Adjusts the massage motor mode: cycles through PULSE, WAVE, and CONSTANT modes. |
Coding Method:
- Press the left side light of the Partner Control decorative strip for 10 minutes, then press [remote control head up + foot up (4, 8) + control box code key]. A buzzer sound indicates successful pairing with control box A. Press the right side light for -20 minutes, then press [remote control head up + foot up (4,8) + control box code key]. A buzzer sound indicates successful pairing with control box B.
- After the remote control is powered off, the default mode is A+B.
- The control box has a reset function for the code key.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
