Richmat HJC25C Control Box

1. Remark

• Up to 2 motors
• BLE control available
• Memory function
• Color: black

2. Dimension (mm)

The control box has the following dimensions:

• Length: 129 mm
• Width: 110 mm
• Height: 40 mm (main body), 73 mm (including mounting bracket)
• Depth of the main body: 5.7 mm
• Height of the main body: 41.7 mm
• Mounting hole diameter: Ø3.7

Diagram showing the top, side, and front views of the control box with dimensions labeled.

3. System Configuration Diagram

This diagram illustrates a typical system setup. It shows a power cord connecting to a power adapter, which then connects to the control box. The control box is connected to two linear actuators (motors) labeled 'A' and 'B' via cables. A remote control is also shown connected to the control box.

Diagram illustrating the connection of the control box to power, motors, and remote control.

4. Remote Control Button Silicone Diagram

The remote control features various buttons for operating the bed. The buttons are labeled with numbers 1 through 9 and include functions like ZERO GRAVITY, ANTI SNORE, FLAT, and MEMORY. The remote also has up/down arrows for head and foot adjustments, and a flashlight function.

Image of a remote control with numbered buttons and function labels.

5. Remote Control Function Description

Coding Method:

To pair the remote control with the control box: Press the head rise and foot rise buttons (3 and 5) simultaneously, then press the control box code matching key. The buzzer sounds, and the indicator light flashes, indicating successful code matching. The control box has a reset function for the code key.

Precautions:

To ensure the reliability and safety of the motor and control box, do not switch keys frequently.

Caution: FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.