Richmat HJH55 Ble Handset

Overview

This document provides information on the Richmat HJH55 Ble handset, a radio frequency remote control designed for adjustable beds. It includes operational details, button functions, and pairing instructions.

Key Features:

Type: Radio frequency handset
Power: Requires 2x 1.5V batteries
Effective Distance: Within 5 meters
Frequency Range: 2.402GHz - 2.48GHz

Dimensions

The handset has the following approximate dimensions:

Length: 173 mm
Width: 50 mm
Thickness (main body): 18 mm
Thickness (side profile): 16 mm

The remote control is branded with 'MATTRESS FIRM'.

Remote Control Button Diagram and Functions

Button Layout and Dimensions

Function Area	Head (mm)	SNORE (mm)	TV (mm)
Head Movement	31	18	114
Foot Movement	79	0	46

Button Function Descriptions

The handset features various buttons for controlling bed functions such as head and foot elevation, massage, and lighting. The following table details the function of each numbered button:

Button Label	Function
1 (Bed Light)	Toggles the bed bottom lamp on/off (constant light).
2 (Flashlight/Memory)	Flashlight: Turns flashlight on/off (default 15s duration). Memory Function: Press and hold for 5s; backlight flashes, enter memory mode. Press ZG/SNORE/TV/M1/M2 within 2s; buzzer "dididi" sounds, and the current motor position, massager, and light bar status are memorized. Factory Reset: Press and hold M1 + Flashlight for 3s; backlight flashes twice, all keys enter one-key release mode, resetting all memory positions to factory default. Continuous Mode: Press and hold FLAT + Flashlight for 3s; backlight flashes three times, all buttons enter continuous pressing mode. Release button to stop motor.
3 (FLAT Reset)	Initiates a one-key reset. All motors retract to their minimum stroke position, and the bed light and massager turn off. (Note: Does not reset after power-on if the bed was already in a reset state).
4 (Head Up)	Extends the head motor.
5 (ZG Position)	Moves the motor to the ZG position with one key (uses an initial value). Multiplexing Function: Long press Flashlight for ~5s (backlight flashes), then press ZG within 2s. Buzzer sounds 3 times, and the current motor position, massager, and light bar status are recorded to ZG. (Status is not cleared after power failure).
6 (Foot Up)	Extends the foot motor.
7 (Head Down)	Retracts the head motor.
8 (SNORE Position)	Moves the motor to the SNORE position with one key (uses an initial value). Timed Release: If one-key release mode is timed for 15 minutes, the bed will level, and the massager will turn off. Press any key to exit timing. Continuous pressing mode has no timing. Multiplexing Function: Long press Flashlight for ~5s (backlight flashes), then press SNORE within 2s. Buzzer sounds 3 times, and the current motor position, massager, and light bar status are recorded to SNORE. (Status is not cleared after power failure).
9 (Foot Down)	Retracts the foot motor.
10 (M1 Position)	Moves the motor to the M1 position with one key (initial value is 0). Multiplexing Function: Long press Flashlight for ~5s (backlight flashes), then press M1 within 2s. Buzzer sounds 3 times, and the current motor position, massager, and light bar status are recorded to M1. (Status is not cleared after power failure).
11 (TV Position)	Moves the motor to the TV position with one key (uses an initial value). Multiplexing Function: Long press Flashlight for ~5s (backlight flashes), then press TV within 2s. Buzzer sounds 3 times, and the current motor position, massager, and light bar status are recorded to TV. (Status is not cleared after power failure).
12 (M2 Position)	Moves the motor to the M2 position with one key (initial value is 0). Multiplexing Function: Long press Flashlight for ~5s (backlight flashes), then press M2 within 2s. Buzzer sounds 3 times, and the current motor position, massager, and light bar status are recorded to M2. (Status is not cleared after power failure).
13 (Head Massager)	If the head massager is not on, press to turn it on. Default strength is the last used setting. If the massager is on, press to increase strength. There are 3 intensities (Low, Medium, High). Default operation time is 15 minutes, continuing at highest intensity.
14 (TIME ON/OFF)	Massager switch and timing button. Press to turn on the massager (default intensity is the last used setting). Timing options: 15 minutes -> 30 minutes -> turn off massager and timing. Timing duration is indicated by two indicator lights.
15 (Foot Massager)	If the foot massager is not on, press to turn it on. Default strength is the last used setting. If the massager is on, press to increase strength. There are 3 intensities (Low, Medium, High). Default operation time is 15 minutes, continuing at highest intensity.
16 (Head Massager Intensity Down)	Reduces the intensity of the head massager. There are 3 intensity levels. Pressing again at the lowest intensity turns the massager off.
17 (WAVE)	If the massager is not on, press to turn it on. This button cycles the massager through 4 modes: Continuous, Low-Speed Wave, Medium-Speed Wave, High-Speed Wave.
18 (Foot Massager Intensity Down)	Decreases the intensity of the foot massager to 3 levels. Pressing again at the lowest intensity turns the massager off.

Note: Pressing any button for more than 50 seconds will cause the remote control to enter sleep mode. Release and press again to resume function.

Coding Method (Pairing Instructions)

Follow these steps to pair the remote control with the control box:

① Single Control Box / Single Remote Control

Keep pressing the Head Up (button 4) and Foot Down (button 9) buttons until the backlight flashes, clearing previous code matching information.
Power on the control box. It will enter code matching state within 60 seconds.
Keep pressing the Head Down (button 7) and Foot Up (button 6) buttons of the remote control until you hear the buzzer sound and the backlight flashes, indicating successful pairing.

② Single Control Box to Dual Remote Control

Keep pressing the Head Up (button 4) and Foot Down (button 9) buttons until the backlight flashes, clearing previous code matching information.
Power on the control box. It will enter code matching state within 60 seconds.
Keep pressing the Head Down (button 7) and Foot Up (button 6) buttons of Remote Control 1 until the buzzer sounds and backlight flashes, indicating successful pairing.
Do not press any other buttons on Remote Control 1. Keep pressing the Head Down (button 7) and Foot Up (button 6) buttons of Remote Controller 2 until the buzzer sounds and backlight flashes, indicating successful pairing.

When switching control between two paired remotes, wait for the previous remote's Bluetooth connection to disconnect before the second remote can control the bed.

③ Dual Control Box to Dual Remote Control

Follow the instructions for "Single Control Box / Single Remote Control" to pair System 1.
Repeat the pairing process for System 2.
Unplug the power from both System 1 and System 2.
Use a synchronization cable to connect the two systems.
Power on System 1 and System 2. The two beds will now operate in synchronous mode.

Notes on Pairing:

After the control box is powered on, you have 60 seconds to press the code matching key to start pairing. The buzzer will beep three times to indicate the code matching state. The control box code matching key has no reset function.
The remote control backlight turns off after 10 seconds of inactivity and enters sleep mode after 15 seconds, disconnecting Bluetooth. Press any button to reconnect.
If the control box is powered on for the first time or after an accidental power cut, reset it before use.
When switching key modes for dual control boxes with dual remotes, press one remote's switch button. This changes the key mode for both remotes simultaneously. Continuous pressing mode does not follow synchronization.

Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

	HJSR96 Ble Remote Control: Functions and Operation Guide Comprehensive guide to the HJSR96 Ble remote control, detailing functions for adjustable beds, including button descriptions, coding methods, Bluetooth pairing, and FCC compliance information from Qingdao Richmat Intelligence Technology Inc.
	Richmat HJC9G Ble Control Box User Guide User guide for the Richmat HJC9G Ble control box, detailing its features, dimensions, system configuration, remote control functions, and pairing instructions for adjustable beds.
	Richmat HJH173 Ble Smart Home Product Function Manual Detailed product function manual for the Richmat HJH173 Ble smart home device, covering remote control operation, features, and precautions.
	Richmat HJH163 Ble Smart Home Remote Control User Manual Comprehensive user manual for the Richmat HJH163 Ble smart home remote control, detailing button functions, operation, coding, precautions, and FCC compliance.
	Richmat HJH159B Ble Smart Home Product Function Manual Comprehensive product function manual for the Richmat HJH159B Ble smart home device, detailing remote control operations, system configuration, parts list, and FCC compliance information.
	Richmat HJH82B Ble Smart Home Remote Control Function Manual Comprehensive guide to the Richmat HJH82B Ble smart home remote control, detailing button functions, system configuration, and operational precautions.
	Richmat HJSRO4 Ble Smart Home Remote Control User Manual Detailed user manual for the Richmat HJSRO4 Ble smart home remote control, explaining button functions, system configuration, and coding methods.
	Richmat Z102490010 System User Manual: Operation, Features, and Safety Detailed user guide for the Richmat Z102490010 adjustable bed system. Covers interface definitions, system configuration, product list, conventional functions, remote control operation, safety precautions, and FCC compliance.