Dyson Airblade Tap
Low Voltage and High Voltage Technical Specification
Electrical Specifications
| Input voltage | Low Voltage = 110-127 V, High Voltage = 208-240 V |
| Frequency | Low Voltage = 50 or 60 Hz (85-115 V at 50 Hz; 85-130 V at 60 Hz); High Voltage = 50 & 60 Hz |
| Rated power | 1400 W |
| Motor type | Dyson digital motor – V4 brushless DC Motor |
| Motor switching rate | 6,100 per second |
| Motor speed | 92,000 rpm |
| Amp | Recommended dedicated 15 amp circuit. Low voltage = 11.7 amps at 120V, High voltage = 7.3 amps |
| Operating temperature range | 32° – 104°F |
| Heater type | None |
| Standby power consumption | Less than 0.5 W |
Construction
| Tap construction | Stainless steel (brushed) |
| Lead Free | Yes |
| Under counter motor bucket | Molded ABS (main unit) also uses polycarbonate and polypropylene |
| Exterior screw type | Torx T15 |
| Water ingress protection rating | IP35 |
Filter
| Filter type | Double-life HEPA filter (glass fiber and fleece prelayer) |
| Bacteria removal | 99.97% at 0.3 microns |
Operation
| Activation | Touch-free infra-red |
| Hand dry time measurement | 14 seconds* |
| Operation lock-out period | 30 seconds |
| Airspeed at apertures | 420 mph |
| Maximum Altitude | 2,000m/6,561 ft. |
| Operating airflow | Up to 7.92 gal/sec and 63.5 CFM |
| Rated operating noise power | 85 db(A) |
Water Operation
| Water flow rate | 1.06 gal/min |
| Tap Aerator | 0.5 gal/min aerator outlet (Optional 0.35 gal/min multi spray laminar aerator available as a service part) |
| Tap power supply | Mains supply |
| Water temperature control | Thermostatic mixer recommended (not supplied) |
| Water pressure required | 14.5-116 psi |
Logistics
| Serial number prefix | AB09 AN5; AB10 AN6; AB11 AN7 |
| Net weight | AB09: 9.5 lbs.; AB10: 10.1 lbs.; AB11: 19.7 lbs. |
| Packaged weight | AB09: 13.4 lbs.; AB10: 14.3 lbs.; AB11: 25.9 lbs. |
| Packaged dimensions (H x W x D) | AB09: 11⁷⁄₈" x 11¹⁄₈" x 11¹⁄₄"; AB10: 10⁷⁄₈" x 17¹⁄₄" x 11"; AB11: 11⁷⁄₈" x 24" x 14³⁄₄" |
| UPC barcodes (Low Voltage) | AB09: 885609001500, AB10: 885609001494, AB11: 885609001487 |
| UPC barcodes (High Voltage) | AB09: 885609004402, AB10: 885609004419, AB11: 885609004426 |
Standard Guarantee
5 year parts and 5 year limited labor warranty
Product Range
| Model | Part Number/SKU (Low Voltage) | Part Number/SKU (High Voltage) |
|---|---|---|
| AB09 Short | 301848-01 | 301841-01 |
| AB10 Long | 301849-01 | 301842-01 |
| AB11 Wall | 301850-01 | 301843-01 |
Sink Specifications
| Compatibility | Compatible with most sink types. Ensure plugs are not installed. See Tap Pre-Installation Guide. |
| Sink Dimensions (Internal unless stated) | Width (Min.): 13¾", Front to back (Min.): 11¾"; Depth (Min.): 4"; Max. sink depth for AB10: 7⁷⁄₈" (external measurement of vessel sink). |
| Sink Materials | Avoid highly polished surfaces (e.g., shiny chrome). Porcelain or brushed metal are ideal. |
Accreditations
- Carbon Trust certified
- HACCP International certified
- NSF International certified
- AB09 Short and AB11 Wall are ADA compliant ♿
- Contributes to LEED certification
Diagrams and Dimensions
Front Elevation: Depicts the tap's spout, control area, and mounting. Includes dimensions for the tap body and fixing points.
Side Elevation: Shows the tap's profile, under-counter mounting, water entry, and rear electrical entry. Illustrates the motor bucket and its dimensions. Includes minimum clearance (Z) and ADA clearance requirements.
Model Specific Dimensions (inches):
AB09 Short
Tap Dimensions: Height 6¼", Width 11⁵⁄₈", Depth 11¹⁄₈"
Motor Bucket Dimensions: Height 10⁵⁄₁₆", Width 5⁹⁄₁₆", Depth 7⁷⁄₁₆"
AB10 Long
Tap Dimensions: Height 12¹⁄₈", Width 11⁵⁄₈", Depth 11¹⁄₈"
Motor Bucket Dimensions: Height 10⁵⁄₁₆", Width 5⁹⁄₁₆", Depth 7⁷⁄₁₆"
AB11 Wall
Tap Dimensions: Length 12¹⁄₁₆", Width 11⁵⁄₈"
Motor Bucket Dimensions: Height 10⁵⁄₁₆", Width 5⁹⁄₁₆", Depth 7⁷⁄₁₆"
Minimum Clearance: Z: 4" clearance from floor. (ADA requires 9" toe clearance)
Contact Information
For more information, please contact Dyson: 1-888-397-6622, www.dysonairblade.com, airbladeinfo@dyson.com
Also available from Hand Dryer Supply: 804-859-2498, www.handdryersupply.com
