Product Overview
PoE Injector 1p S
Description: Primary switched PoE injector with battery backup, 12 V, 25 W, with room for a 7 Ah battery.
Image: A compact, white, rectangular enclosure with a single port labeled 'PoE' and a power input. It shows a typical industrial power supply unit.
Specifications
Voltage out: 12 VDC
Output voltage in battery operation: 12 VDC
Current: 0.5 A
Charging current: max. 0.5 A
Power: 25 W
Number of PoE injector ports: One
Constant output voltage: Yes, regardless of battery or mains operation.
Self-consumption: Power consumed by the circuit board when deployed and in battery operation. (Specific data not provided in the document).
Load outputs: Can drive load, but output for other applications is missing.
Alarm: The unit cannot give alarm.
Protection: Against overload, overvoltage, overtemperature, short circuit, and deep discharge. Controlled charging extends battery life.
Indications and communication: LED displays information and alarms on the circuit board and enclosure door. Communication via protocol (RS-485/I2C) against UC systems (ASSA ABLOY, RCO, Sentrion, Unison, Bravida, Vanderbilt/ACRE, Tidomat) is not available as an option and can only be set from the factory.
Area of Use
The PoE Injector is used to extend the distance between a PoE device and its connection (switch). It makes it possible to power PoE devices at longer distances. The integrated battery continues to power the injector when the steady power supply is lost. The product is intended for indoor use only and is not suitable for outdoor use.
Batteries can power systems, such as access systems, during power grid outages.
The product offers long life, energy efficiency, and support is available.
Common Uses
- Supports IP cameras, readers, door centers, and other networked security devices.
- Provides power and data distribution over a single network cable for simplified installation.
- Used to power IP-based access systems where both data and power travel through network cabinets.
Technical Description
Features a plate for attachment of Keystone modules and ports.
Battery and Battery Type
Battery Type: 12 V, AGM lead-acid battery, maintenance-free. Battery sizes must not be mixed.
Battery Capacity: 7.2 Ah (for 1 piece).
Backup Operating Time on Batteries
The reserve operating time depends on the connected load. For estimates of reserve operating times, visit: www.milleteknik.se/Manualer/FaQ/Reservdrifttider/
Enclosure
Sheet metal cabinet for wall mounting, powder-coated white. Features six cable entries and a cable tie holder inside.
Dimensions (with and without packaging)
| Feature | Dimensions (H x W x D) |
|---|---|
| Product | 230 x 216 x 85 mm |
| Packaging | 125 x 260 x 255 mm |
Note: Product and packaging dimensions may differ slightly due to packaging variations.
Height Units, Fan, and IP Class
| Feature | Value |
|---|---|
| Height Units (HE) | 6 |
| Built-in fan | No |
| IP Class | IP20 |
Note: Cannot be mounted in a 19" rack.
Weight
| Name | Net weight | Weight incl. packaging |
|---|---|---|
| PoE injector 1p S | 4 kg | 4 kg |
Installation Requirements
Intended for fixed installation. Must be installed indoors (environmental class 1). Ambient temperature range: +5°C to +40°C. Recommended ambient temperature for optimal battery life: +15°C to +25°C.
Product Compliance
The product meets the following requirements:
- EMC: EMC Directive 2014/30/EU
- Electricity: Low Voltage Directive: 2014/35/EU
- PoE: IEEE 802.3af, IEEE 802.3at/30.8 W. (Note: 802.3at type 2 is not supported as the PoE card lacks a handshake function for type 2).
- CE: CE directive according to: 765/2008
Guarantee
The product has a two-year warranty for manufacturing defects. Batteries and wearing parts are not covered by warranty.
Expandable, Options, and Accessories
The product cannot be expanded.
Manufacturing, Lifespan, Environmental Impact, and Recycling
Manufactured by Milleteknik in Partille, Sweden. Designed for a long service life to reduce environmental impact. Product life is influenced by environmental factors, load, and handling. Products are recyclable due to their modular design; they can be returned to the nearest recycling station or the manufacturer.
Ecodesign Requirements
This product meets the ecodesign requirements according to EU Regulation 2019/1782. Further information on energy performance and recyclability can be found in the manual or at milleteknik.se/ekodesign.
Important Information
⚠️ IMPORTANT: The regulation is primarily designed for consumer products. Milleteknik's products are developed for professional use and industrial environments. Information is disclosed for power supplies so customers have relevant details.
Efficiency and Standby Consumption
| Denomination (Swedish) | Efficiency (%) | Standby Consumption, Typical (W) |
|---|---|---|
| PoE injector 1p S | 84.5% (at rated load) | 1.0 W |
Links
Latest Information: Products and software are subject to updates; find the latest information on the Milleteknik website.
Technical Specifications: PoE
Manuals and Product Sheets
Find manuals and product sheets at: www.milleteknik.se
| Name | Dimensions | Batteries that fit | Link |
|---|---|---|---|
| PoE injector 1p S | 230 x 216 x 85 mm | 1 piece 12 V, 7.2 Ah | Product Page [QR Code] |
Note: Batteries are only included if specified; otherwise, they need to be purchased separately.
About this Information
All information is published subject to possible errors. Information is updated without prior notice.
Publication Date: 2025-08-29
Company Information
Milleteknik AB, Ögärdesvägen 8 B, 433 30 Partille, Sweden
Website: www.milleteknik.se
