Milleteknik MOVEO 24V 10A FLX L Product Sheet
Manufacturer: Milleteknik AB
Publication Date: 2025-08-15
Product Overview
A black, rectangular Milleteknik power supply unit is shown. It is accompanied by accessories including a communication module and cables. Two 45 Ah AGM batteries are also pictured separately.
The Milleteknik MOVEO 24V 10A FLX L is a primary switched battery backup unit providing 24 V DC at 5 A. It supports dual 45 Ah batteries and includes a 2+2 output module and connection kit, designed for use with MOVEO/MOVEO XL systems.
Technical Specifications
| Feature | Specification |
|---|---|
| Input Voltage | 230 V AC - 240 V AC, 47 Hz - 63 Hz |
| Output Voltage | 24 V DC |
| Charging Current | Max 0.5 A |
| Output Module | 2+2 module for prioritized and non-prioritized loads |
| Battery Type | 12 V, AGM lead-acid, maintenance-free |
| Battery Capacity | Supports two 45 Ah batteries (do not mix sizes) |
| Communication | RS-232 MOVEO communication card included |
| Efficiency | 89% (at nominal load) |
| Standby Consumption (Typical) | 0.644 W |
Application Area
This product supplies power to building access control systems, alarm systems, or other security products operating on 24 V DC. The power supply's rectifier converts 230 V AC to 24 V DC. It is certified for use in security areas compliant with SSF 1014, from alarm class 1 to alarm class 4. The unit offers a long lifespan, is energy-efficient, and support is available for future issues.
Alarms
Rotary relay alarms can be configured for the following conditions:
- Disconnected batteries
- Delayed mains failure
- Charger overvoltage fault
- Charger undervoltage fault
- Low battery voltage
- Low system voltage
- Tamper alarm
- Fuse failure
- Expired battery
Protection
Controlled battery charging protects against overcharging and extends battery life.
Fuses
The unit includes:
- Mains fuse
- Load connection fuse
- Battery fuse
Indications & Communication
LEDs on the PCB, enclosure door, and via the UC connection display status information and alarms.
Weight
| Item | Net Weight | Weight in Packaging |
|---|---|---|
| MOVEO 24V 10A FLX L (Main Unit) | 42.7 kg | 43 kg |
| Spare Battery (Accessory) | 0.037 kg (37 grams) | 0.2 kg |
Note: The listed number of batteries represents the maximum quantity the unit can handle simultaneously. If multiple battery sizes are specified, the unit can only accommodate one battery size at a time.
Installation Requirements
The unit is intended for fixed installation indoors. It requires an environment class 1 rating with an ambient temperature range of +5°C to +40°C. The recommended ambient temperature for optimal battery lifespan is +15°C to +25°C.
Regulations & Certifications
The product complies with the following directives and standards:
- EMC: EMC Directive 2014/30/EU
- Electrical: Low Voltage Directive 2014/35/EU
- CE: CE Directive 765/2008
- Immunity: EN61000-6-2:2005, EN61000-4-2, -3, 4, -5, -6, -11, SS-EN 50 130-4:2011 Edition 2, EN50131-6
Important Information & Disclaimer
The regulation is primarily designed for consumer products. Milleteknik's products are developed for professional and industrial environments, meaning most are not directly affected. However, as power supplies are covered, Milleteknik openly provides relevant information for transparency, allowing customers to feel confident in their choice.
All data is published with potential errors and is updated without prior notice. The translation is not fact-checked and should not be used as a basis for calculations. Refer to the Swedish original for accurate information.
Note: The product is part of electrical systems and is subject to applicable electrical and safety directives. It is not classified as a machine under the Machinery Directive (2006/42/EY).
Warranty
The product comes with a five-year manufacturing defect warranty. Batteries and consumable parts are not covered by the warranty.
Ecodesign & Environmental Information
This product complies with ecodesign requirements according to EU Regulation 2019/1782.
Further information on energy performance and recyclability is available in the manual or at milleteknik.se/ekodesign.
The following applies to the entire product.
