Product Overview
The Milleteknik ATO 24V 10-Output Module is designed to expand and distribute power for 24V applications. It seamlessly integrates with the Milleteknik ATO 24V 1HE module, providing an additional ten protected outputs.
Product Image: A circuit board featuring ten output connectors.
Product Identification
Name: 10 Output Module for 1U02
Product Number: A-FU0024100P02
Reference Number: 52 137 12
Key Features and Functionality
This module expands the ATO 24V 1HE module with ten outputs. It distributes and secures power for up to ten 24V applications.
Alarm System: Features an alarm for fuse failure, indicated by an LED and a switching relay for quick fault diagnosis.
Output Prioritization: Three of the load outputs are prioritized, while the remaining seven are secondary. In the event of a power failure, the voltage to unprotected outputs will be interrupted.
Expandability: The system can be expanded with two additional cards to provide a total of 30 outputs.
General Applications
- Expanding multiple 24V applications in access control systems, particularly in door environments.
- Securing alarm systems for multiple devices, such as magnetic holders.
Technical Description
The module features a reverse board with ten 1-pole protected outputs. Each output is equipped with a fuse, capable of handling a maximum load of 2A per output and a total of 10A for the entire board.
Voltage, Current, and Power
Input Voltage: 27.3 V DC (nominal 24V)
Output Voltage: 27.3 V DC (nominal 24V)
Self-Consumption
Self-consumption refers to the power drawn by the power supply on the PCB when the system is activated and operating on battery power.
| Component | Self-Consumption (Battery Operation) | Comment |
|---|---|---|
| 10 ATO Output Module | 103 mA | - |
Outputs Details
Ten 1-pole protected outputs are provided. Three of these outputs can be configured as unprotected, designed to interrupt power during a power failure.
Fuses
Each output is protected by a fuse.
Indications and Communication
The module's LED indicator illuminates when the input power is connected and the output is active.
Weight
| Item | Net Weight | Weight in Packaging |
|---|---|---|
| 10 Output Module ATO | 0.1 kg | 0.2 kg |
Mounting Requirements
This module is designed exclusively for mounting on the 10 Output Module ATO 24V 1HE.
Regulations and Certifications
The product complies with the following requirements:
- EMC: EMC Directive 2014/30/EU
- Electrical: Low Voltage Directive: 2014/35/EU
- CE: CE Directive 765/2008
- Environmental: REACH Regulation: Directive 1907/2006, WEEE Regulation: Directive 2002/96/EC, RoHS Regulation: Directive 2015/863
Machinery Directive Note: The product is part of electrical systems and is subject to relevant electrical and safety directives. It is not classified as a machine under the Machinery Directive (2006/42/EC).
Eco-design Considerations
Regulation (EU) 2019/1782 primarily targets consumer goods. Milleteknik products are developed for professional and industrial use, meaning their direct environmental impact is generally limited. As these power supplies are covered products, Milleteknik provides transparent information to ensure customer confidence.
Note: Accessories, expansion, or optional cards that only control, monitor, or distribute energy, rather than changing it, are exempt from the ecodesign directive.
(a) At nominal load.
Warranty
Milleteknik provides a two-year warranty against manufacturing defects.
Manufacturing, Lifespan, Environmental Impact, and Recycling
Manufacturer: Milleteknik AB, Partille, Sweden.
The product is engineered for a long operational lifespan to minimize environmental impact. Obsolete products should be disposed of responsibly at the nearest recycling facility.
Information Disclaimer
All information provided is subject to potential errors and may be updated without prior notice. This translation has not undergone formal fact-checking or language review and should not be used as a basis for calculations. Please refer to the original Swedish documentation for definitive information.
Publication Date: 2025-08-29
