ASSA ABLOY 690F & 691F Electric Trim Door Preparation

This document provides essential notes and specifications for preparing wood or composite doors for the installation of ASSA ABLOY 690F and 691F Electric Trim exit devices, compatible with the 7000(F), 6000(F), and 2100(F) Series SquareBolt®, Rim, and Surface Vertical Rod devices.

General Notes

This template is an addition to the device template. Locate centerlines using horizontal and vertical references on the device template.
Do not scale the drawing.
Dimensions are provided in inches (mm).
The left-hand reverse (LHR) door is shown; preparation is typical for both door hands.
Ensure adequate structural support is provided to maintain door integrity during operation.
Prepare mounting holes when installing trim.
Dimensions given about a centerline are symmetrical.
Unspecified radius is a maximum of 1/8.

Specific Series Notes

7000 Series: A wire access hole must be prepared if a wire raceway is not provided in the door (the device will be used as the raceway).
2100(F) and 6000(F) Series: A wire raceway MUST be provided in the door. Do not prepare a wire access hole.

Note: The lever design prefix does not affect door preparation.

Responsibility

Door and frame manufacturers are responsible for providing adequate construction or reinforcements for the proper installation of the hardware shown. All architectural builders hardware must be installed on properly reinforced doors and frames, regardless of type, material, or method of construction.

690F, 691F (Electric Trim) Door Preparation Details

This section details the preparation for 7000(F) Series, 6000(F) Series & 2100(F) Series SquareBolt®, Rim and Surface Vertical Rod Exit Devices on Wood or Composite Doors.

For support, contact ASSA ABLOY at 1-800-438-1951.

Diagram Description: Section X-X

This is a cross-section view of a door showing the placement of hardware. Key dimensions include:

1/2 (12.7) Dia.: Diameter of a hole through the door.
1-1/4 (32): Dimension indicating the depth or width.

Diagram Description: Vertical Reference and Trim Centerline

This view shows the layout on the outside face of the door, indicating vertical and horizontal references. Key dimensions and features include:

Vertical Reference (Trim Centerline): A central vertical line for alignment.
1-3/8 (34.9): Distance from the edge or reference line.
1/4 (6.4) Max. (4 Places): Maximum depth for four locations.
1/2 (12.7): A specific dimension, likely for hole placement.
2-1/4 (58): A significant dimension, possibly the cutout width.
1-1/8 Radius (28.6): A radius measurement for a curved edge.
11/16 (17.5): A dimension indicating hole placement.
Wire access hole (LHR door): Location for wire access on the left-hand reverse door.
Wire access hole (RHR door): Location for wire access on the right-hand reverse door.
Cutout (Outside Face): The area to be cut out on the exterior of the door.
Horizontal Reference (Device and Trim Centerline): A central horizontal line for alignment.
3-5/8 (92): Repeated dimension indicating spacing.
3/4 (19): Another dimension for precise placement.
7/16 (11.1): Dimension for hole placement.

Diagram Description: Lever Handle Assembly

A simple line drawing illustrating the 690F and 691F hardware, showing a lever handle attached to a rectangular escutcheon plate with a key cylinder.

ASSA ABLOY Document Information
SUPERSEDES	7400-1690 05-18	DO NOT SCALE DRAWING	DATE	11-23
	7400-1690

	ASSA ABLOY ACCENTRA 7000 Series Architectural Exit Devices Parts Manual This comprehensive parts manual details the various components and configurations for the ASSA ABLOY ACCENTRA 7000 Series of architectural exit devices. It includes detailed diagrams, part numbers, and descriptions for rim exit devices, surface vertical rod devices, concealed vertical rod devices, mortise exit devices, trims, levers, cylinders, strikes, and accessories. The manual is designed to assist users in identifying and ordering the correct parts for installation, maintenance, and repair.
	ASSA ABLOY 7220M(F) Concealed Vertical Rod Exit Device Installation Instructions Comprehensive installation guide for the ASSA ABLOY 7220M(F) Concealed Vertical Rod Exit Device, covering door preparation, rod assembly, device mounting, strike installation, and final adjustments.
	ASSA ABLOY ACCENTRA KRM200 & KRM200F and Corbin Russwin CR972BKM / CR972KM / CR910BKM Mullions Installation Guide Detailed installation instructions for ASSA ABLOY ACCENTRA KRM200 & KRM200F and Corbin Russwin CR972BKM / CR972KM / CR910BKM mullions. Includes tools required, step-by-step procedures, and important safety warnings regarding fire ratings and lead exposure.
	ASSA Vinga Series: Comprehensive Door and Window Handles Explore the ASSA Vinga series of door and window handles by ASSA ABLOY, featuring elegant design, robust functionality, and security options for residential and commercial applications. Discover models like ASSA 7311, 7314, 7315, 7312, and accessories.
	ASSA ABLOY SDL Privacy Barn Door Lock Surface Jamb Mount Installation Guide Comprehensive installation instructions for the ASSA ABLOY SDL Privacy Barn Door Lock, covering surface jamb mount applications, parts list, and step-by-step guidance for installation.
	ASSA ABLOY DC700G-CM Door Closer Mounting Instructions Comprehensive guide for the installation and mounting of the ASSA ABLOY DC700G-CM door closer, including dimensions, assembly steps, and adjustment details.
	ASSA ABLOY SL500 Sliding Door Operator Installation and Service Manual Comprehensive guide detailing the installation, maintenance, and service procedures for the ASSA ABLOY SL500 automatic sliding door operator. Covers safety, technical specifications, and operational guidance for building entrances.
	ASSA ABLOY PDU8500 Series Panic Device Installation Guide Comprehensive installation guide for the ASSA ABLOY PDU8500 Series Panic Device, covering tools, supplies, and step-by-step instructions for various door types and configurations.