Happy & Polly Egg Flower Cat Tree

Read Before You Start

Please identify and sort all components shown below. For any issues during installation, please ask for assistance at service@happyandpolly.com or check our YouTube Channel: youtube.com/channel/UCbPD98rZ-jOYrTCQA_0eNLg.

Components Overview: The product includes a base, several cylindrical poles, and a top platform designed to resemble a flower.

Safety Guidelines to Prevent Injuries

• ✔️ This cat tree is intended for CATS, not to be sat on by human babies.
• ✔️ Care should be taken when unpacking the product.
• ✔️ Keep small objects away from children and pets.
• ✔️ Follow instructions accordingly, make sure all steps are accomplished.
• ✔️ NEVER climb, shake, step on, or hang on the product.
• ✔️ Keep the cat tree indoors and away from direct sunlight or damp areas.
• ✔️ Always operate this cat tree on a flat, level, and stable surface.
• ✔️ Examine the cat tree frequently for damaged, missing, or loose parts.
• ✔️ Discard if the cat tree is torn or damaged.
• ✔️ Contact customer service for any damaged parts within two months.

Important Notes

• Please identify and sort all components shown below before assembly.
• All pictures shown are for illustration purposes only. The actual cat tree may vary due to product enhancement.

Assembly Instructions

Follow these steps to assemble your Egg Flower Cat Tree:

1. Step 1: Attach the first pole (labeled '1') to the circular base (labeled '0').
2. Step 2: Screw the second pole section (labeled '2') onto the first pole.
3. Step 3: Screw the third pole section (labeled '3') onto the second pole.
4. Step 4: Attach the top flower-shaped platform (labeled '4') to the top of the third pole.