Happy & Polly Blood Red Night Gothic Cat Tree Assembly Instructions

Parts List

A

Square platform (1 pc)

B

Hanging ball toy (1 pc)

C

Octagonal platform (1 pc)

D

Octagonal platform (1 pc)

E

Hexagonal base (1 pc)

F

Short post (1 pc)

G

Medium post (3 pcs)

H

Long post (1 pc)

J

Screws (4 pcs)

K

Screws (2 pcs)

L

Screws (3 pcs)

* Install in the order of 1 to 2. (There is a serial number under the screw in the manual)

Assembly Instructions

1. Step 1: Prepare Platforms with Posts

   Take one octagonal platform (D). Attach two medium posts (G) to the underside of platform D using two screws (K). Next, take the second octagonal platform (C). Attach one medium post (G) to the underside of platform C using one screw (K). The diagram shows posts being screwed into the platforms.

2. Step 2: Assemble the Cat Tree Structure

   Place the hexagonal base (E) on a flat surface. Note: Place the red mat on the wooden base (E). Attach the short post (F), three medium posts (G), and the long post (H) vertically to the base (E) using three screws (L). The diagram shows posts being screwed into the base.

   Following this, place the prepared octagonal platforms (C and D) onto the corresponding posts. Finally, attach the square platform (A) to the top of the structure. The completed assembly forms a multi-level cat tree.