Spectra SG Portable Breast Pump - User Manual

1. Important Safety Information ⚠️

Please read all instructions before using this product. Failure to follow safety guidelines may result in injury or damage to the product.

• Always ensure the pump is unplugged before cleaning or assembly.
• Do not immerse the motor unit in water or other liquids.
• Use only Spectra Baby USA approved accessories.
• Keep the pump and accessories away from children and pets when not in use.
• Do not use the pump if it appears damaged or is not functioning correctly.
• Consult with a healthcare professional for any breastfeeding concerns.

2. Product Components ⚙️

Familiarize yourself with the parts of your Spectra SG Portable breast pump:

• Motor Unit: The main power unit containing the dual motors and controls.
• Breast Flange: A funnel-shaped piece that fits over the nipple and areola to create a seal for suction. Available in various sizes.
• Milk Collection Bottle: A container that attaches to the flange to collect expressed milk.
• Backflow Protector: A barrier that prevents milk from entering the motor unit, ensuring hygiene. It consists of a diaphragm, cover, and cap.
• Tubing: Connects the flange to the motor unit, transferring suction.
• Valve: A small, petal-like component that attaches to the bottom of the flange, controlling milk flow and maintaining suction.
• Bottle Adapter: Connects the flange/backflow protector assembly to the milk collection bottle.

3. Assembly Instructions

Proper assembly is crucial for optimal performance and hygiene. Follow these steps:

1. Attach the valve to the bottom of the breast flange. Ensure it is securely seated.
2. Connect the bottle adapter to the top of the flange.
3. Attach the diaphragm to the backflow protector cover.
4. Place the backflow protector cap onto the diaphragm.
5. Connect the tubing to the backflow protector cap on one end and to the motor unit on the other. Ensure a snug fit.
6. Screw the milk collection bottle onto the bottle adapter.
7. Repeat for the second breast if using dual pumping.

When assembled correctly, the parts should fit snugly and not easily separate.

4. How to Use Your SG Portable

The Spectra SG Portable offers adjustable vacuum strength and cycle speed for personalized comfort.

Getting Started:

1. Ensure all parts are clean and dry.
2. Assemble the breast shield kit as described above.
3. Connect the tubing to the motor unit.
4. Position the flange comfortably against your breast, ensuring the nipple is centered.
5. Press the power button to turn the unit on.
6. Begin with a gentle massage mode or low suction.
7. Gradually increase the vacuum strength and adjust the cycle speed to find a comfortable and effective setting. Refer to the control panel for specific buttons (e.g., L/R for left/right, Vacuum +/- , Cycle +/-).
8. Pump for 15-20 minutes or until milk flow slows significantly.
9. Turn off the unit by pressing the power button.
10. Carefully detach the bottle and store milk properly.

Dual Pumping:

The SG Portable features dual motors, allowing you to pump both breasts simultaneously for increased efficiency.

5. Cleaning and Maintenance

Regular cleaning ensures hygiene and prolongs the life of your pump.

• After Each Use: Disassemble the milk collection bottles, flanges, backflow protectors, valves, and bottle adapters. Wash these parts in warm, soapy water. Rinse thoroughly and allow to air dry on a clean towel or drying rack.
• Motor Unit: Wipe the exterior of the motor unit with a damp cloth. Never immerse the motor unit in water.
• Tubing: Tubing does not typically require washing. If condensation appears inside the tubing, disconnect it from the motor unit and let it air dry completely. Do not use the pump if tubing is wet.
• Sterilization: The breast flange, milk collection bottle, backflow protector, valve, and bottle adapter can be sterilized by boiling (for 5 minutes), steaming, or using a microwave sterilizer bag. Ensure parts are completely dry before reassembly.

6. Troubleshooting

If you encounter issues, consult this guide:

• No Suction or Weak Suction: Check that all parts are assembled correctly and securely. Ensure the valve is properly attached and not damaged. Check tubing for kinks or leaks. Make sure the backflow protector is intact.
• Motor Unit Not Turning On: Verify the power adapter is securely plugged into the unit and a working electrical outlet.
• Milk Leaking: Ensure the bottle is screwed on tightly and the backflow protector is correctly assembled.

For further assistance, please visit the Spectra Baby USA website.

7. Specifications

• Brand: Spectra Baby USA
• Model: SG Portable (Synergy Gold Portable)
• Power Source: AC Adapter (included)
• Features: Dual Motors, Adjustable Vacuum and Cycle Settings

8. Warranty Information

Spectra Baby USA offers a limited warranty on its products. Please refer to the official Spectra Baby USA website or contact customer support for detailed warranty terms and conditions.

For more information, visit: Spectra Baby USA