Spectra Synergy Gold Breast Pump User Manual
Introduction
Welcome to the Spectra Synergy Gold Breast Pump User Manual. This guide provides essential information for the safe and effective use of your Spectra Synergy Gold breast pump.
Important Safety Information
[Warning Symbol] Read all instructions before using this product.
- For household use only.
- Do not use while bathing or showering.
- Do not store or leave product where it can fall or be pulled into a tub or sink.
- Do not place or drop into water or other liquid.
- This product is not a toy.
- Close supervision is necessary when used by or near children.
- Use this product only for its intended use as described in this manual.
- Do not use if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water.
- Keep the cord and plug away from heated surfaces.
- Never block the openings of the product. Keep free of hair, clothing, string, and the like.
- Do not use outdoors.
- Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
- Do not disassemble or attempt to repair the unit yourself.
[Information Symbol] This device is intended for use by lactating women to express milk.
Product Overview: Spectra Synergy Gold
The Spectra Synergy Gold is a hospital-grade, double electric breast pump designed for efficiency and comfort. It features a closed system to prevent milk from entering the motor.
Components:
Diagram of components:
- Breast Flange: Connects to the breast. Available in various sizes.
- Milk Collection Bottle: Collects expressed milk.
- Diaphragm: Seals the breast shield, creating suction.
- Backflow Protector: Prevents milk from entering the tubing and pump motor.
- Tubing: Connects the breast shield to the pump motor.
- Valve: Controls milk flow.
- Bottle Neck Ring: Secures the flange to the bottle.
- Motor Unit: The main pump device.
[Image Description] A visual representation of all the individual parts of the Spectra Synergy Gold breast pump, clearly labeled.
Getting Started: Assembly and Setup
Follow these steps to assemble your breast pump:
- Wash all parts that come into contact with milk (flanges, bottles, diaphragms, backflow protectors, valves) in warm, soapy water. Rinse thoroughly and dry.
- Assemble the breast shield: Attach the diaphragm to the breast shield, then attach the backflow protector to the diaphragm.
- Attach the valve to the bottom of the breast shield.
- Connect the tubing to the backflow protector and the other end to the motor unit.
- Attach the milk collection bottle to the breast shield.
- Ensure all connections are secure.
How to Use Your Breast Pump
For optimal results, follow these usage instructions:
- Ensure the pump is properly assembled and plugged into a power source.
- Position the breast flange comfortably against your breast, ensuring a good seal.
- Press the power button [Power Symbol].
- Adjust the suction strength and cycle speed using the control buttons [Up Arrow Symbol] [Down Arrow Symbol] to find a comfortable and effective setting.
- Begin pumping. Typically, a let-down reflex will occur within a few minutes.
- Continue pumping until milk flow slows significantly.
- Press the power button to stop the pump.
- Carefully detach the milk collection bottle and store the milk properly.
- Repeat for the other breast if double pumping.
[Tip Symbol] Experiment with different suction and cycle settings to find what works best for you.
Cleaning and Maintenance
Regular cleaning is crucial for hygiene and pump performance.
Daily Cleaning:
- Disassemble the breast shield, backflow protector, valve, and bottle.
- Wash in warm, soapy water.
- Rinse thoroughly.
- Air dry on a clean towel or drying rack.
Sterilization (Recommended Weekly):
- Boil parts in water for 5-10 minutes, or use a steam sterilizer.
- Ensure parts are completely dry before reassembly.
[Caution Symbol] Do not boil or sterilize the tubing or motor unit.
[Maintenance Symbol] Check valves and diaphragms regularly for wear and tear. Replace as needed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low milk output | Incorrect flange fit, worn parts, low suction setting | Ensure proper flange fit, check/replace valves and diaphragms, increase suction/cycle speed |
| No suction | Tubing disconnected, valve issue, diaphragm not seated | Check all connections, inspect valve and diaphragm, ensure diaphragm is properly seated |
| Motor not running | Not plugged in, power issue | Check power connection, try a different outlet |
Warranty Information
The Spectra Synergy Gold breast pump comes with a limited warranty. Please refer to the warranty card included with your product or visit the Spectra Baby USA website for details.
For warranty service, contact Spectra Baby USA.
Contact Information
For customer support, replacement parts, or further assistance, please contact Spectra Baby USA:
Website: https://www.spectrababyusa.com/
Phone: [Customer Service Phone Number - Placeholder]
Email: [Customer Service Email - Placeholder]
