Gaggenau AA210460: Lowering Frame for 60 cm Flat Kitchen Hood
Product Overview and Technical Specifications
Product Description
The Gaggenau AA210460 is a lowering frame designed for 60 cm flat kitchen hoods. It is part of the Gaggenau series 200 hoods. This patented frame allows the kitchen hood to retract completely into the upper cabinet, providing a seamless aesthetic. It is suitable for direct assembly on the kitchen wall or a reinforced upper cabinet.
Compatibility: Can be combined with flat kitchen hood series 200.
Installation Requirements:
- Required cavity depth of the upper cabinet together with the lowering frame measures 335 mm.
- For assembly in the upper cabinet, if a back wall panel is present and thicker than 5 mm, the lowering frame requires lining, and cavity depths must be adjusted accordingly.
- A flexible hose is necessary for the installation of the lowering frame.
Characteristics and Dimensions
| Characteristic | Value |
|---|---|
| Model | AA210460 |
| Dimensions (HxWxD) | 90 x 530 x 630 mm |
| Dimensions of the packed product (HxWxD) | 90 x 530 x 630 mm |
| Dimensions of the master case (mm) | Not specified |
| Pallet dimensions (LxWxH) | 140.0 x 80.0 x 120.0 mm |
| Quantity per packing unit | Not specified |
| Standard number of units per pallet | 30 |
| Units per layer | Not specified |
| Net weight | 2.8 kg |
| Gross weight | 5.0 kg |
| EAN code | 4242006256654 |
| Maximum Power | Not specified |
| Voltage | Not specified |
| Frequency | Not specified |
| Length electrical supply cord | Not specified |
| Plug type | Not specified |
Installation Diagrams and Dimensions
The following descriptions detail the dimensions and layouts shown in the installation diagrams.
Diagram 1: Cross-section of upper cabinet with AA 211 812
This diagram illustrates a vertical cross-section of an upper cabinet, indicating required clearances and dimensions for installing the lowering frame and a compatible hood (AA 211 812). Key measurements include:
- Cabinet internal width: minimum 600 mm.
- Cabinet internal depth: minimum 320 mm.
- Clearance from the top of the cabinet: 90 mm for AF 200 models, 320 mm for AF 210 models.
- Overall cabinet dimensions shown: Height 303 mm.
- Frame dimensions indicated: 181 mm width, 89 mm depth.
- Other dimensions shown: 352 mm, 491 mm, 393 mm, 155 mm, 279 mm, 376 mm, 310 mm, 32 mm.
Diagram 2: Upper cabinet for AF 200 160 with AA 210 460 lowering frame
This diagram shows a top-down view of the upper cabinet interior, detailing cutouts and placement for the AA 210 460 lowering frame and an AF 200 160 hood. Key dimensions:
- Cabinet internal width: minimum 540 mm.
- Cabinet width options: 600 mm or 900 mm.
- Cabinet internal depth: minimum 335 mm.
- Ventilation duct diameter: 170 mm.
- Frame dimensions: 198 mm width, 85 mm depth.
- Detailed measurements for mounting and cutouts: 177 mm, 155 mm, 538 mm, 279 mm, 32 mm, 376 mm, 310 mm, 320 mm, 242 mm, 49 mm.
Diagram 3: Upper cabinet for AF 210 with AA 210 460/AA 210 490 lowering frame
Similar to Diagram 2, this shows the upper cabinet interior for AF 210 hoods with the AA 210 460/AA 210 490 lowering frame. Key dimensions:
- Cabinet internal width: minimum 540 mm.
- Cabinet width options: 600 mm or 900 mm.
- Cabinet internal depth: minimum 335 mm.
- Ventilation duct diameter: 170 mm.
- Frame dimensions: 198 mm width, 85 mm depth.
- Detailed measurements for mounting and cutouts: 177 mm, 155 mm, 538 mm, 279 mm, 32 mm, 376 mm, 310 mm, 320 mm, 242 mm, 49 mm.
Diagram 4: Detailed cabinet measurements (Imperial/Metric)
This diagram provides detailed measurements for various installation points and component sizes, presented in both inches and millimeters. It specifies dimensions for:
- Vertical dimensions: 615/16" (177 mm), 195/16" (491 mm), 151/2" (320 mm), 11/4" (32 mm), 6/8" (155 mm), 213/16" (538 mm), 11" (279 mm), 61/8" (155 mm).
- Horizontal dimensions: 91/8" (49 mm), 115/16" (242 mm), 32"/16" (830 mm).
- Includes measurements for mounting holes and distances.
Diagram 5: Fitting directly to the kitchen wall
This diagram illustrates the mounting points and dimensions for installing the lowering frame directly onto a kitchen wall. Key dimensions:
- Horizontal mounting hole positions: 320 mm, 310 mm.
- Overall width for installation: 600 mm or 900 mm.
- Vertical dimensions from top: 1413/16" (376 mm), 123/16" (310 mm).
- Clearance from top: 60 mm.
- Other dimensions shown: 137/8" (352 mm), 11/4" (32 mm).
Diagram 6: Fitting directly to the kitchen wall (Alternative)
This diagram shows an alternative set of dimensions for direct kitchen wall fitting. Key dimensions:
- Horizontal mounting hole positions: 60 mm, 84 mm, 310 mm.
- Overall width for installation: 600 mm or 900 mm.
- Minimum cabinet depth requirement: 235/8" (min. 600 mm).
- Vertical dimensions from top: 123/16" (310 mm).
- Other dimensions shown: 23/8" (60 mm), 35/16" (84 mm), 235/8"/357/16" (600/900).
