What DEEBOT 900 brings you?
- Efficient Cleaning: Smart Navi navigation technology scans the home to create a visual map, planning an efficient cleaning path for customized cleaning with minimal missed spots.
- Smart Home Integration: Compatible with Amazon Alexa and Google Home. Controllable via the ECOVACS App, allowing voice commands or remote control via smartphone.
- Versatile Cleaning: Customizable features include virtual boundaries to restrict cleaning to specific areas and Area Cleaning mode to prioritize zones.
- Interchangeable Suction: Capable of cleaning various messes with different suction options. The direct suction inlet is ideal for hair and animal fur, while main brushes provide deep cleaning, especially on carpets.
Before Activation
- Carpet Edges: Ensure tasseled carpet edges are folded under before activating the robot.
- Clear Floor: Remove cords and small objects from the floor that could entangle the product.
- Anti-Drop Sensors: When DEEBOT is active, Anti-Drop Sensors detect drops. A physical barrier may be needed at edges to prevent falling.
Setup Instructions
Step 1: Prepare the Robot
- Remove the protective strip from the robot's bumper before use.
Step 2: Place the Charging Dock
- Place the Charging Dock on a level floor surface. Ensure an area of 1.5m (5') in front and 0.5m (1.6') on both sides is clear of objects and reflective surfaces. Plug in the Charging Dock.
Step 3: Install Side Brushes
- Attach Side Brushes to the bottom of DEEBOT by pressing each brush into its corresponding colored slot until it clicks.
Step 4: Power On
- Open the robot's Top Cover. Turn the robot's Power Switch to the ON position. DEEBOT is powered ON when it emits a musical sound and the AUTO Mode Button stays illuminated.
Step 5: Charge the DEEBOT
- Before first use, charge the DEEBOT for 4 hours with the power button in the ON mode.
Step 6: Start the DEEBOT
- Activate the DEEBOT by directly pushing the button on its surface.
- Note: The robot's Control Panel lights may dim after a few minutes of inactivity. Press the AUTO Mode Button again to wake it up.
Step 7: Operation Recommendation
- When DEEBOT is not actively cleaning, it is recommended to keep it switched ON and charging.
Mobile Control and App Connection
Connecting to the ECOVACS App
For iOS System:- Open the ECOVACS App on your phone and press the "add the robot" button to select your robot model.
- Ensure your phone is connected to your home Wi-Fi network.
- Open the robot's main panel, turn on the power switch, and press the reset button.
- After the robot beeps once, press "start setup".
- In the app interface, press the "go to connection settings" button and connect to the "ECOVACS" Wi-Fi network in your phone's settings.
- After hearing an indicator sound from the robot, return to the App.
- When the connection is completed, the screen will show "Setup completed". Press the "complete" button.
- You can now access the next page of the App interface to control your robot.
Video tutorial on App connecting: http://bit.ly/2nlvNhg
For Android System:- Open the ECOVACS App on your phone and press the "add the robot" button to select your robot model.
- Ensure your phone is connected to your home Wi-Fi network.
- Open the robot's main panel, turn on the power switch, and press the reset button.
- After the robot beeps once, press "start setup".
- If you allow the ECOVACS App to access your location, you can connect to your ECOVACS robots immediately via your home Wi-Fi.
- If you prefer not to share location information, go to your phone's Wi-Fi settings and directly connect to your robot's Wi-Fi.
- After hearing an indicator sound from the robot, return to the App.
- When the connection is completed, the screen will show "Setup completed". Press the "complete" button.
- You can now access the next page of the App interface to control your robot.
Video tutorial on App connecting: http://bit.ly/2DNKT9P
Smart Home Integration
Google Home Connection
- Open the Google Home App and click the top-left hamburger menu. Select "Home control" or open the Assistant App to search.
- Search for "ECOVACS" or "DEEBOT".
- Click the link button and enter the ECOVACS account authentication page to link your account.
- Once connected, you can control DEEBOT using voice commands such as:
- "Ok Google, talk to DEEBOT."
- "Ok Google, tell DEEBOT to start cleaning."
- "Ok Google, tell DEEBOT to stop cleaning."
Troubleshooting
| No. | Malfunction | Possible Causes | Solutions |
|---|---|---|---|
| 1 | DEEBOT is not charging. | DEEBOT is not switched ON. DEEBOT has not connected to the Docking Station. The battery is completely discharged. | Switch ON DEEBOT. Ensure the robot's Charging Contacts are connected to the Docking Station Pins. Re-activate the battery: Switch ON, place DEEBOT on the Docking Station by hand, remove after charging for 3 minutes, repeat 3 times, then charge normally. |
| 2 | DEEBOT cannot return to the Docking Station. | The Docking Station is not correctly placed. | Refer to section 3.2 for correct Docking Station placement. |
| 3 | DEEBOT gets stuck while working and stops. | DEEBOT is tangled with something on the floor (e.g., electrical wires, curtains, carpet fringing). | DEEBOT will attempt to free itself. If unsuccessful, manually remove obstacles and restart. |
| 4 | DEEBOT returns to the Docking Station before it has finished cleaning. | When battery is low, DEEBOT automatically enters Return to Charger Mode. Working time varies by floor surface, room complexity, and cleaning mode. | This is normal. No solution necessary. |
| 5 | DEEBOT does not clean automatically at the scheduled time. | Time Scheduling function is cancelled. Continued Cleaning function is ON and DEEBOT has just finished cleaning the scheduled area. DEEBOT is switched OFF. The robot's battery is low. | Program DEEBOT to clean at specific times using the ECOVACS App. This is normal. No solution necessary. Switch ON DEEBOT. Keep DEEBOT switched ON and connected to the Docking Station for a full battery. |
| 6 | DEEBOT does not clean the whole area. | The robot's Suction Intake is blocked and/or debris is stuck in its components. The cleaning area is not tidy. | Power OFF DEEBOT, clean the Dust Bin and invert the robot. Clean the robot's Suction Intake, Side Brushes, and Main Brush as described in section 4. Remove small objects and tidy the cleaning area before DEEBOT starts cleaning. |
| 7 | DEEBOT is not able to connect to the home Wi-Fi network. | Incorrect home Wi-Fi username or password entered. DEEBOT is not within range of your home Wi-Fi signal. Network setup started before DEEBOT was ready. Your smartphone's operating system needs to be updated. | Enter the correct home Wi-Fi username and password. Ensure DEEBOT is within Wi-Fi range. Turn ON Power Switch. Press the RESET Button with a needle for 3 seconds. DEEBOT is ready for network setup when it plays a musical tune and its Wi-Fi Indicator light flashes slowly. Update your smartphone's operating system. The ECOVACS App requires iOS 9.0+ or Android 4.0+. |
Further Assistance
DEEBOT will indicate issues with an alarm indicator light and sounds.
If you have more questions during your review of the product, please contact the ECOVACS local PR team:
LOCAL PR AGENCY NAME
Contact name:
Email:
Phone:
#DoMoreOfWhatYouLove with ECOVACS DEEBOT !
