Important Safety Information
⚠️ Read safety instructions before use. Follow the instructions strictly.
For complete instructions, please refer to the instruction manual or visit global.ecovacs.com/instructions to download the Instruction Manual in more languages.
The document also contains instructions in German, Spanish, French, Italian, and Russian.
Getting Started: Setup and Charging
Step 1: Prepare the Robot
Unpack the DEEBOT OZMO Slim10 and its accessories.
The robot is shown with its charging cable being pulled upwards.
Step 2: Set Up the Charging Dock
Place the charging dock on a flat surface against a wall.
The charging dock is shown, with the robot's charging contacts aligning with the dock's contacts.
Step 3: Position the Charging Dock
Ensure adequate clearance around the charging dock for the robot to dock successfully.
Required clearance: 0.5m (1.6 ft) on both sides and 1.5m (5 ft) in front of the charging dock.
The robot connects to the charging dock via its charging cable plugged into a wall outlet.
Step 4: Attach Side Brushes
Attach the two side brushes to the underside of the robot.
The side brushes are designed to sweep debris towards the main suction inlet.
Operating Your DEEBOT
Step 5: Power On
Locate the power switch on the robot.
The robot has a power switch that can be set to ON or OFF.
Step 6: Charge the Robot
Place the DEEBOT onto the charging dock.
The robot will automatically connect to the charging contacts. Charging typically takes up to 4 hours.
Ensure the robot's power switch is in the ON position while charging.
Step 7: Start Cleaning
Initiate cleaning using the button on the robot or the remote control.
The robot will begin its cleaning cycle, typically following a systematic pattern such as back-and-forth or U-shaped paths to cover the floor area.
The robot can be controlled via the button on its top surface or using the provided remote control.
Optional Mopping System
This section details the installation and use of the optional mopping system.
Attach the mopping module to the robot.
The mopping system allows the DEEBOT to mop floors in addition to vacuuming.
Operation and cleaning patterns are similar to standard vacuuming, with the mopping function engaged.
ECOVACS HOME App
Enhance your DEEBOT experience with the ECOVACS HOME mobile application.
Download the app from the App Store or Google Play.
The app requires a 2.4GHz Wi-Fi connection.
Compatibility:
- ✔️ iOS 9.0 or later
- ✔️ Android 4.0 or later
The app icon features the ECOVACS logo.
Live Smart. Enjoy Life.
