Anker 651 USB-C Dock (8-in-1, Wireless Charging)

Important Safety Instructions

1. Avoid dropping.
2. Do not disassemble.
3. Do not expose to liquids.
4. For the safest and fastest charge, use original or certified cables.
5. This product is suitable for moderate climates only.
6. The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
7. Open flame sources, such as candles, must not be placed near this product.
8. Only use a dry cloth or brush to clean this product.

Compatibility

Compatible Laptops

All laptops with a USB-C port supporting Power Delivery and DisplayPort Alt Mode.

Compatible Phones (For Wireless Charging)

iPhone 13/13 Pro/13 Pro Max/12/12 Pro/12 Pro Max/11/11 Pro/11 Pro Max/X/XR/XS/XS Max (7.5W fast charging); SAMSUNG S21 Ultra/S20 Ultra/S10+/S10/ Note 20 Ultra/Note 10+/Note 10/Note 9/Note 8 (10W fast charging); Google Pixel 6/5/4/3 (10W fast charging); All Huawei phone models with support for 5W wireless charging.

Compatible Operating Systems

macOS 10.14 or later, Windows 7/8/10/11

What's in the Box

• USB-C Dock
• USB-C to USB-C 3.1 Gen 2 Cable
• 100W Power Adapter
• Power Cord
• User Manual
• Quick Start Guide

At a Glance

The Anker 651 USB-C Dock features a sleek, tilted design for optimal viewing and access. It provides a wide range of connectivity options and integrated wireless charging.

Using Your USB-C Dock

Power on Your Dock

1. Plug one end of the included power adapter into the DC-IN port and the other into a power outlet.
2. Press the power button. The wireless charging indicator will turn white.

Connect the Dock to Your Laptop

1. Connect your laptop to the dock's USB-C upstream port using the provided cable.
2. The connection status indicator will turn white, and your laptop will begin charging at a maximum of 85W.

Charge Your Phone Wirelessly

1. Put your phone on the charging stand of the dock.
2. The wireless charging indicator will turn blue.

LED Indicator Guide

Port Overview

USB-C 3.1 Gen 1 Port

Connect USB-C compatible devices such as SSDs (Solid-State Drive) to the USB-C 3.1 Gen 1 port (5V/1.5A, 5 Gbps).

Audio Jack

Connect earphones or other devices with a 3.5 mm AUX connector (not included).

USB-A 3.1 Gen 1 Ports

Connect USB devices such as USB drives, keyboards, or mice via the two USB-A 3.1 Gen 1 ports (5V/0.9A, 5 Gbps).

HDMI 2.0 Port and DisplayPort 1.4

Connect the dock to up to two monitors via the HDMI port (4K@60Hz) and DisplayPort (4K@60Hz). Monitor resolution varies depending on your laptop's video transmission mode:

DisplayPort 1.2 Transmission Mode

DisplayPort 1.4 Transmission Mode

If you're using a MacBook to connect dual monitors, both monitors will show the same content.

If you're using a Windows laptop to connect dual monitors, you can choose between showing the same content or different content on both monitors.

Specifications

Trademarks

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Wireless Charging Precautions

• You cannot charge your device wirelessly in these scenarios:
  • using a case with a magnetic/iron plate;
  • using a case with a grip or stand;
  • using an ultra-thick (> 5 mm) protective phone case.
• Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.
• Do not place any foreign objects between your device and the wireless charger's surface, including metal pads, magnetic cards, door keys, coins, NFC cards, or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating.
• Wireless charging products make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F.

Regulatory Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.

The following importer is the responsible party:

Company Name: Fantasia Trading LLC

Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764

Telephone: 1-800-988-7973

Declaration of Conformity (EU)

Hereby, Anker Technology Co., Limited declares that the product type A8391 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com

This device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out. The device complies with RF specifications when the device is used at 20 cm from your body.

Declaration of Conformity (GB)

Hereby, Anker Innovations Limited declares that the product type A8391 is in compliance with the following Directives: The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & Radio Equipment Regulations 2017. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com

This device in compliance with the essential requirements and other relevant provisions of UKCA. All essential radio test suites have been carried out. The device complies with RF specifications when the device is used at 20 cm from your body.

Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

The following importer is the responsible party (for UK matters only):

Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

The following importer is the responsible party (for EU matters only):

Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany

IC Statement (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, received, including interference that may cause undesired operation of the device.

RF Exposure Statement (Canada)

This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10 cm between the product and your body.

Recycling Information

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. ♻️