HomeWorks QS Wired Palladiom Keypad
The HomeWorks QS wired Palladiom keypad allows users to control lights, shades/draperies, temperature, and 3rd-party equipment. It connects to a HomeWorks QS processor on the QS link. The keypad features large, easy-to-read buttons with white, backlit engraving, making them simple to find and operate in low light conditions. Keypads are available in a variety of colors, finishes, and button marking options. The status of an active button press or scene is indicated through backlighting intensity, which is configurable via the HomeWorks QS software. Dynamic Backlighting Management (DBM) automatically adjusts backlight intensity based on ambient lighting conditions and can also be programmed to adjust intensity by time of day or button presses.
Diagrams show two styles: 1-Gang U.S. Style and 1-Column Square Style.
Specifications
| Category | Details |
|---|---|
| Model Numbers | See How to Build a Model Number (Keypads). |
| Power | 24-36 V⎓, 30 mA |
| Typical Power Consumption | 0.7 W (Test conditions: all backlights on medium intensity, two LEDs on (two presets active), keypad powered at 24 V⎓) |
| Regulatory Approvals | Lutron Quality Systems registered to ISO 9001:2015. Complies with UL 508; IEC 60669-2-1; and CSA C22.22 No. 14-13. EBB-1-3COL only - Complies with UL 2269; IEC 60670-1; and CSA C22.22 No. 18.2 (2006). |
| Environment | Ambient operating temperature: 32°F to 104°F (0°C to 40°C), 0% to 90% non-condensing relative humidity. Indoor use only. |
| Communications | SELV/PELV/NEC® Class 2 wiring connects keypads to other devices on the QS link. Each keypad counts as 1 device on the QS link. Each keypad column consumes 1 Power Draw Unit (PDU) on the QS link. For complete information, see “Power Draw Units on the QS link” (Lutron P/N 369405). |
| ADA Standard | Control operation complies with ADA standards for an accessible design. |
| ESD Protection | Meets IEC 801-2. Tested to withstand 15 kV electrostatic discharge without damage or memory loss. |
| Power Failure | Power failure memory: should power be interrupted, the keypad will return to its previous state when power is restored. |
| Mounting | Typical U.S. style wallbox dimensions: 3.7 in (95 mm) H × 1.8 in (46 mm) W × 2.8 in (70 mm) D. Typical square style wallbox dimensions: 75 mm H × 75 mm W × ≥25 mm D. Typical round style wallbox dimensions: 68 mm × ≥25 mm D. See Mounting on page 11 for more details. |
| Wiring | SELV/PELV/NEC® Class 2 |
| Terminals | Each terminal accepts up to two 18 AWG (1.0 mm²) wires. |
| Warranty | www.lutron.com/TechnicalDocumentLibrary/warranty.pdf www.lutron.com/TechnicalDocumentLibrary/Intl_warranty.pdf |
Design Features
- Adjustable back-light intensity.
- Faceplate snaps on with no visible means of attachment.
- Use Faceplate or Button Kits to change color or engraving.
- Field-changeable button and faceplate assemblies allow for customization. See How to Build a Model Number (Button Kits) as some restrictions apply.
- IP20 Rating.
Dimensions
Detailed dimensions are provided for U.S. Style and Square Style keypads. Measurements are shown in inches (mm) or millimeters (in) as indicated.
U.S. Style - Plastic, Glass, or Metal Finish
Diagrams illustrate front and side views for 1-Gang, 2-Gang, 3-Gang, and 4-Gang configurations, with specific measurements for plastic, glass, and metal finishes.
Square Style - Plastic, Glass, or Metal Finish
Diagrams illustrate front and side views for 1-Column, 2-Column, 3-Column, and 4-Column configurations, with specific measurements for plastic, glass, and metal finishes.
Note: Wallbox installation will affect these dimensions.
How to Build a Model Number
The model number for HomeWorks QS Wired Palladiom Keypads is constructed using a series of codes:
System Type
- HQWT: HomeWorks QS
Faceplate Options
- U: U.S. Style
- S: Square Style
Note: Base units are not interchangeable between plastic, metal, and glass.
Button Configurations
1-Gang/Column, U.S. or Square Style
- P2: 2-Button
- P3: 3-Button
- P4: 4-Button
- PR: 3-Button with Raise/Lower
2-Column Square Style
Combinations for Left Column and Right Column:
- P22: 2-Button / 2-Button
- P24: 2-Button / 4-Button
- P2R: 2-Button / 3-Button with Raise/Lower
- PR2: 3-Button with Raise/Lower / 2-Button
- PRR: 3-Button with Raise/Lower / 3-Button with Raise/Lower
- P42: 4-Button / 2-Button
- P44: 4-Button / 4-Button
- P4R: 4-Button / 3-Button with Raise/Lower
Backlighting
- W: White
Colors and Finishes
Architectural Matte Finishes
- AL: Almond
- BE: Beige
- BL: Black
- BR: Brown
- GR: Gray
- IV: Ivory
- LA: Light Almond
- SI: Sienna
- TP: Taupe
- WH: White
Architectural Metal Finishes
- BB: Bright Brass
- BC: Bright Chrome
- BN: Bright Nickel
- PG: Polished Graphite
- QB: Antique Brass
- SB: Satin Brass
- SC: Satin Chrome
- SN: Satin Nickel
Signature Metal Finishes
- GP: Graphite
Glass Finish
- CBL: Clear Black Glass
- CWH: Clear White Glass
Note: Finishes for buttons and faceplates must always match (e.g., matte plastic buttons with matte plastic faceplate, metal buttons with metal faceplate).
Engraving
- Omit: Generic engraving and custom buttons*
- E: Predefined custom engraving**
* Ships with engraving credit to allow future engraving.
** Customer must provide engraving details at time of order.
Button Kits
Button Kits are used to change color, button configuration, and engraving. Each kit includes a button assembly. Model structure: PBT - [Button Config] - [Backlighting] - [Color/Finish] - [Engraving].
Faceplate Kits
Faceplate Kits are used to change color and ganging. Each kit includes a faceplate adapter and faceplate. Model structure: LWT - [Faceplate Option] - [Gangs] - [Color/Finish].
Gangs and Openings
- P**: Palladiom Keypad (1-gang)
- PP: 2-gang
- PPP: 3-gang
- PPPP: 4-gang
* Palladiom Keypads do not gang with other devices of different sizes (e.g., Maestro or GRAFIK T controls).
Engraving Options
The Palladiom Keypad offers various engraving options. Predefined project engraving (option "E") is for when engraving details are known at purchase. Generic engraving is provided when details are not known, with an engraving credit for custom-engraved button kits to be ordered later. Diagrams illustrate generic engraving layouts for different button configurations.
How to Select a Palladiom Keypad
Tables provide examples of keypad and faceplate configurations for U.S. Style and Square Style, listing Model Number, Quantity, Assembled status, and Mount type.
Keypad Assembly
Tools Required: Phillips head screwdriver (not included)
- Place button kit on back of faceplate.
- Align bulk unit over button kit and faceplate.
- Assemble using 4 screws (provided).
- Repeat steps 1–3 for each base unit.
Diagrams show an exploded view of the Base Unit, Bulk Unit, Button Kit, and Faceplate.
Mounting
Detailed diagrams and instructions are provided for mounting U.S. Style and Square Style keypads into various wallboxes.
U.S. Style Mounting
Illustrations show 1-Gang, 2-Gang, 3-Gang, and 4-Gang installations, including back views of the keypad and wallbox connections.
Square Style Mounting
Illustrations show 1-Column, 2-Column, 3-Column, and 4-Column installations into square or round wallboxes. Notes specify screw usage (horizontal/vertical) and compatibility with different backboxes.
Note: Specific wallbox part numbers (e.g., EBB-1-3COL) may be required for certain installations.
QS Link Wiring
Wiring Requirements: Use SELV/PELV/NEC® Class 2 wiring to connect keypads to the QS link.
- Connect two 22 AWG (0.5 mm²) shielded, twisted pairs of wires to terminals 3 and 4 of the keypad control link connector.
- Shielding (drain) of the twisted-pair wires must be connected together, but not to earth/ground or to the keypad. Do not allow shielding to contact the grounded wallbox.
- The total length of wire on a QS wired link must not exceed 2000 ft (610 m).
Notes:
- Use appropriate wire connecting devices as specified by local codes.
- Each base unit model number counts as 1 device on the QS link.
- Each button column of a QS wired Palladiom Keypad consumes 1 power draw unit (PDU) on the QS link. For complete information, see “Power Draw Units on the QS Link” (Lutron P/N 369405).
Diagrams show wiring connections:
- Terminals 1 & 2: Power (Common - Black, V+ - Red)
- Terminals 3 & 4: Data Link (Shielded Twisted Pair, 18 AWG to 22 AWG; MUX - Purple, MUX - White)
- Drain/Shield connection indicated.
Colors and Finishes
A wide range of colors and finishes are available for the Palladiom Keypad:
Architectural Matte Finishes
- White (WH)
- Ivory (IV)
- Almond (AL)
- Light Almond (LA)
- Gray (GR)
- Brown (BR)
- Black (BL)
- Taupe (TP)
- Sienna (SI)
- Beige (BE)
Architectural Metal Finishes
- Satin Brass (SB)
- Bright Brass (BB)
- Satin Nickel (SN)
- Bright Nickel (BN)
- Satin Chrome (SC)
- Bright Chrome (BC)
- Polished Graphite (PG)
- Antique Brass* (QB)
Signature Metal Finishes
- Graphite (GP)
Glass Finish
- Clear White Glass (CWH)
- Clear Black Glass (CBL)
* Antique Brass is a handcrafted finish created using a manual relief process, which may result in variations in luster, hue, and appearance.
Note: Due to printing limitations, colors and finishes shown cannot be guaranteed to perfectly match actual product colors. A PD-CK-1 finish chip sample set is available.
Lutron, GRAFIK T, Maestro, myRoom, Palladiom, and Quantum are trademarks or registered trademarks of Lutron Electronics Co., Inc. All other product names, logos, and brands are property of their respective owners.
