ATRIA WIRELESS User Manual and Quick Start Guide
A comprehensive guide to setting up and using your AQIRYS ATRIA WIRELESS keyboard.
Introduction
Welcome to the AQIRYS ATRIA WIRELESS keyboard. This guide will help you get started quickly and make the most of your new device.
Package Contents
Inside the box, you should find the following items:
- ATRIA WIRELESS Keyboard
- USB Receiver
- USB Charging Cable
- User Manual / Quick Start Guide (this document)
Connecting the Keyboard
Follow these steps to connect your ATRIA WIRELESS keyboard:
- Locate the USB Receiver: Find the small USB receiver, usually stored in a compartment on the keyboard or included separately.
- Connect the Receiver: Plug the USB receiver into an available USB port on your computer.
- Power On the Keyboard: Ensure the keyboard is powered on. Look for a power switch, typically on the bottom or side of the keyboard. A power indicator light may illuminate.
- Automatic Connection: Your computer should automatically detect the keyboard and establish a connection. If not, ensure the keyboard is within range and powered on.
- Charging (if applicable): If the keyboard has a low battery or is designed to be charged, connect it to a power source using the provided USB charging cable.
Basic Operation
Your ATRIA WIRELESS keyboard is ready to use once connected. Enjoy typing and navigating your computer.
Indicator Lights:
- Caps Lock: Indicates when the Caps Lock key is active.
- Num Lock: Indicates when the Number Lock is active.
- Battery/Charging: May indicate battery status or charging progress.
Troubleshooting
If you encounter issues:
- Ensure the USB receiver is securely plugged in.
- Check that the keyboard is powered on and the battery is charged.
- Try plugging the USB receiver into a different USB port.
- Restart your computer.
Support
For further assistance, please refer to the AQIRYS website or contact their support channels.
