AQIRYS AQUARIUS Series INTEL 1700 Socket Installation Guide
User Manual for AQIRYS AQUARIUS Series CPU Cooler
Step 1: Attaching Pump Fasteners
Instruction: Attach the INTEL fasteners (for the 1700 socket) to the pump using the screws (G) and following the positioning in the image.
Diagram Description: The diagram shows the pump unit with hoses and separate mounting brackets. Arrows indicate the attachment of these brackets to the pump. Screws labeled 'G' are used for this connection.
Diagram Description: A second diagram illustrates the use of a screwdriver to tighten screws (G) into the pump assembly, with circular arrows indicating the tightening motion.
Step 2: Installing the Backplate
Instruction: Configure the backplate (B) for the appropriate processor socket, positioning all four clips inward (for socket 1700).
Diagram Description: This diagram displays the backplate (B) with adjustable clips. Dimensions relevant to socket compatibility (1700, 115x, 1200) are shown. The clips are indicated as movable.
Instruction: Install the backplate behind the motherboard by inserting the double-sided tape (H) and checking the positioning relative to the motherboard holes.
Diagram Description: A diagram shows a motherboard with mounting holes. The backplate (B) is positioned behind the motherboard, with double-sided tape (H) applied. Alignment with the motherboard holes is emphasized.
