User Manual
Model Numbers: HG61H0874, HG61F0584, HG61G0585
What You Need
Tools Required: A Phillips head screwdriver is required for the assembly of this product (not included). Power tools should not be used to assemble this product.
Personnel Required: 1 person is needed for assembly.
Hardware List
| ID | Description | Quantity |
|---|---|---|
| A | Ø15x9mm screw | 16PCS |
| B | Ø6x35mm screw | 16PCS |
| C | Ø3x30mm screw | 4PCS |
| D | Ø8x30mm screw | 12PCS |
| E | Ø4x18mm screw | 1PC |
| F | Ø4x18mm screw | 1PC |
| 1 | 400x300x15mm panel | 1PC |
| 2 | 400x300x15mm panel | 1PC |
| 3 | 400x300x15mm panel | 1PC |
| 4 | 400x300x15mm panel | 1PC |
| 5 | 370x300x15mm panel | 1PC |
| 6 | Ø35x100mm leg/foot | 4PCS |
| 7 | 375x235x3mm panel | 1PC |
| 8 | 375x17x3mm panel | 1PC |
| 9 | 365x160x12mm panel | 1PC |
| 10 | 240x120x12mm panel | 1PC |
| 11 | 240x120x12mm panel | 1PC |
| 12 | 340x120x12mm panel | 1PC |
| 13 | 350x230x3mm panel | 1PC |
Product Assembly
⚠️ Check the package contents before getting started!
STEP 1
Attach part B (8 pieces) to panels 1 (1 piece) and 2 (1 piece) using screws.
Diagram shows panels 1 and 2 being joined by screws B.
STEP 2
Attach part B (4 pieces) and part D (8 pieces) to panels 3 (1 piece) and 4 (1 piece) using screws.
Diagram shows panels 3 and 4 being prepared with screws B and D.
STEP 3
Attach part D (4 pieces) and panel 5 (1 piece).
Diagram shows panel 5 being attached to another component using screws D.
STEP 4
Attach part A (4 pieces) to panels 3, 5, and 4 using screws.
Diagram shows panels 3, 4, and 5 being assembled together using screws A.
STEP 5
Attach part A (4 pieces) to panels 1 and 7 (1 piece), and panel 8 (1 piece) using screws.
Diagram shows panels 1, 7, and 8 being joined using screws A. Arrows indicate sliding panel 8 into place.
STEP 6
Attach part A (4 pieces) to the top of the assembled unit using screws.
Diagram shows the main body of the unit with screws A being inserted into the top panel.
STEP 7
Attach part 6 (4 pieces) to the bottom of the unit.
Diagram shows the unit from the bottom, with four legs (part 6) being screwed in.
STEP 8
Attach part B (4 pieces) to panel 9 (1 piece) using screws.
Diagram shows panel 9 with screws B being inserted.
STEP 9
Assemble the drawer components: Attach part C (4 pieces) to panels 10 (1 piece) and 11 (1 piece) using screws. Then attach panel 12 (1 piece).
Diagram shows the drawer sides (10, 11) being joined by screws C, and panel 12 being attached.
STEP 10
Assemble the drawer base: Attach part A (4 pieces), E (1 piece), and F (1 piece) to panel 9 (1 piece) and panel 13 (1 piece) using screws.
Diagram shows the drawer base (panel 9) and drawer front (panel 13) being assembled with screws A, E, and F.
STEP 11
Insert the assembled drawer into the main unit.
Diagram shows the drawer being slid into the opening of the main unit.
STEP 12
Final assembly complete. The drawer is now in place.
Diagram shows the fully assembled bedside table with the drawer closed.
