METAL SHED USE & CARE MANUAL

1. SAFETY PRECAUTIONS

WARNING:

• Always wear gloves and safety glasses during assembly.
• Ensure the shed is installed on a level, stable surface (wood, concrete or compacted gravel recommended).
• Keep flammable materials away from the shed.
• Avoid climbing on the roof or overloading shelves/racks.

2. ASSEMBLY INSTRUCTIONS

Tools Required:

• Phillips screwdriver or drill
• Rubber mallet
• Ladder (for larger sheds)
• Level

Steps:

1. Prepare the Base:

   • Clear debris and level the ground. A concrete pad (≥4" thick) is ideal.

2. Frame Assembly:

   • Follow the numbered parts in the included diagram. Connect wall panels first, then attach the roof.

3. Secure the Structure:

   • Anchor the shed to the ground using provided stakes or concrete anchors.

3. MAINTENANCE & CARE

Cleaning:

• Use mild soap + water and a soft cloth to clean surfaces. Avoid abrasive cleaners.
• Rinse thoroughly to prevent soap residue.

Rust Prevention:

• Inspect annually for scratches or rust.
• Touch up damaged areas with matching paint.

Winter Care:

• Remove heavy snow from the roof to prevent deformation.

Doors:

• Keep door tracks clean and lubricate annually with silicone spray.
• Close and lock doors to prevent wind damage.

Fasteners:

• Use all provided washers to prevent weather damage and scratches.
• Regularly check and tighten screws/bolts.

4. TROUBLESHOOTING

5. WARRANTY INFORMATION

• Limited [1]-year warranty against manufacturing defects.

6. CONTACT INFORMATION

• Manufacturer Support: wldepot@outlook.com