TOB81 User Manual

Assembly Instructions

This document provides instructions for assembling the TOB81 playpen.

Estimated Assembly Time: 10 minutes

Required Personnel: 1 person

Package Contents

Before starting, please check all package contents.

Hardware List:

• A: 9 Pieces
• B: 1 Piece

Important Safety Warnings

WARNING: Children have died or been seriously injured when enclosures are not securely installed.

• ALWAYS install and use the enclosure as directed using all required parts.
• NEVER use an enclosure to keep a child away from the enclosure.
• Use only with the locking mechanism securely engaged.
• STOP using when a child can climb over or dislodge the enclosure.
• CARE & MAINTENANCE: Wipe clean with a soft cloth and dry thoroughly before using. Never clean with abrasive, ammonia-based, bleach-based, or spirit-type cleaners.

WARNING: THIS TOY IS TO BE ASSEMBLED BY AN ADULT. In its unassembled state, it contains potentially hazardous sharp edges or points, so please keep out of children's reach.

Assembly Steps

You may assemble this gate as shown below:

To open this gate: Slide the button and turn right to unlock.

Connecting Panels: Press one pillar into the hole of the other pillar. (According to Chart 1)

Securing Panels: Put the fastener of the pillar into the hole to make sure this gate is fastness. (According to Chart 2)

Chart 1: [Panel Connection]

Chart 2: [Panel Fastening]

Technical Specifications

• Brand: TOBBI
• Material: PE
• Color: Red, Yellow, Blue

Additional Information

For more information or assistance, please visit www.jaxpety.com.