This guide provides a quick overview for operating the Tennant T291 Floor Scrubber (Dual Disk). It is intended for rapid consultation and does not substitute the complete user and maintenance manual. Always read the full manual included with the machine's packaging before operation and strictly adhere to all instructions.
Step 1: Prepare Solution
Add water (H₂O) and cleaning solution (CHEM) to the designated tanks.
Step 2: Power On
Turn the machine ON using the power button.
Step 3: Start Operation
Press the 'PUSH' button to initiate the scrubbing function.
Step 4: Attach Brushes/Pads
Attach the correct brush or pad to the scrubber head. Ensure it is properly secured (indicated by 'OK' symbol) and not incorrectly attached (indicated by 'X' symbol).
Step 5: Select Mode
Choose the desired operating mode: AUTO or ECO.
Step 6: Adjust Handle
Adjust the handle or lever for comfortable and effective control, following the directional arrow.
Step 7: Connect/Release Component
Connect or release a specific component as indicated by the red arrow.
Step 8: Engage/Disengage Function
Press the 'PUSH' button again, likely to engage or disengage a specific machine function.
Step 9: Advanced Settings
Perform a sequence of 'PUSH' button presses. This may be for accessing advanced settings or executing multi-stage operations.
Step 10: Final Actions
Complete the operation by following the indicated sequence of lever adjustments, button presses, and solution dispensing, as guided by arrows and icons.
Document Reference: PLDC04521 Rev.01 (05-2021)
